• 한국가스학회지
• /
• 제18권2호
• /
• pp.16-20
• /
• 2014

본 논문에서는 현재 캠핑 문화의 확산에 따라 수요가 증가하는 LGP 재충전 용기에 관한 내압성능을 실험적으로 검증하였다. 겨울철에 부탄가스는 높은 비점의 영향으로 기화가 쉽게 일어나지 않는 물적 특성을 지니고 있다. 하지만 프로판의 경우 비점이 낮아 겨울철에도 기화가 쉽게 일어나 연료로써 공급 필요성이 증가되고 있다. 하지만 프로판은 높은 증기압으로 인해 많은 안전상의 문제가 존재하며, 이를 극복하고 연로로써 유통되기 위해서는 안전한 용기의 공급이 우선시 되어야 한다. 국내외적으로 고압용 소형 재충전 용기의 보급을 시도하고 있으나, 프로판의 높은 증기압으로 인한 안전상의 문제로 제재가 되고 있다. 본 논문은 재충전 용기의 내압성능을 검증하기 위해 수압장치를 이용하여 용기의 가압 및 파열 실험을 수행하였다. 또한 고온에서 프로판의 증기압과 용기 파열시 수압과 비교하여 그 특성을 제시하였다. 수압가압 실험 및 파열 실험을 통해 토출 된 본 논문의 결과는 향후 소형 재충전 용기 개발 연구의 기초가 될 것으로 기대하며, 재충전 용기의 보급에 있어 기준 자료로 활용 될 것으로 사료된다.

• Journal of Microbiology and Biotechnology
• /
• 제27권11호
• /
• pp.2052-2059
• /
• 2017

The emergence and dissemination of Salmonella genomic island 1 (SGI1) are strongly associated with the occurrence of multidrug-resistant (MDR) enterobacteria in humans and animals. Diverse SGI1s have been reported among Salmonella enterica and Proteus mirabilis in several countries. We aimed to characterize SGI1 in P. mirabilis isolates from humans and chickens in Chungcheong Province, Korea. A total of 44 P. mirabilis isolates were recovered from humans (n = 20) and chickens (n = 24). Antimicrobial susceptibility was determined by disk diffusion assay. To detect and characterize SGI1s, PCR amplification and PCR mapping experiments were performed. Repetitive extragenic palindromic-PCR (REP-PCR) was performed to assess the clonality of the isolates. The four P. mirabilis strains (16.7%) from chicken harbored a SGI1, whereas none of the isolates from clinical specimens contained SGI1. The SGI1s detected in our study were all confirmed as SGI1-PmABB harboring aminoglycoside-resistant genes (aacCA5 and aadA7). In P. mirabilis isolates, the presence of SGI1-PmABB was significantly correlated with high resistance rates of the isolates to antimicrobial agents, such as gentamicin, streptomycin, and spectinomycin. Moreover, the four SGI1-bearing isolates showed the same REP-PCR patterns and that suggested both horizontal and clonal spread of the isolates. This study is the first attempt to determine SGI1s in P. mirabilis isolates in Korea. We confirmed that P. mirabilis isolates carrying SGI1-PmABB were distributed at poultry farms in Korea. The present study emphasizes the need for continuous monitoring of SGI1s to prevent spreading of the MDR genomic islands among P. mirabilis isolates from humans and animals.

• Journal of Microbiology and Biotechnology
• /
• 제27권9호
• /
• pp.1716-1723
• /
• 2017

The rapid dissemination of extended-spectrum ${\beta}$-lactamase (ESBL)-producing Escherichia coli has significantly contributed to public health hazard globally. A total of 281 E. coli strains recovered from pigs and chickens between 2009 and 2015 in South Korea were analyzed for ESBL production. ESBL phenotypes were recognized in 14 E. coli isolates; ten and three ESBL-producing isolates carried only $bla_{CTX-M}$ and $bla_{CMY}$ genes, respectively, and one isolate harbored both genes. The predominant CTX-M and CMY types were CTX-M-15 (n = 8) and CMY-2 (n = 3). We also detected ESBL-producing isolates harboring $bla_{CTX-M-65}$, $bla_{CTX-M-14}$, $bla_{CMY-6}$, $bla_{DHA-1}$, and $bla_{TEM-1}$ genes. All ESBL-producing isolates showed resistance to the extent of the fourth generation cephalosporins, along with multidrug resistance. CTX-M-15-producing isolates showed higher MIC values than CTX-M-14- and CTX-M-65-producing isolates. The $bla_{CTX-M}$ and $bla_{CMY}$ genes have the potential to be transferable. The spreading of $bla_{CMY}$ and $bla_{CTX-M}$ genes was arbitrated mainly via Frep and IncI1 plasmids. Our isolates showed clonal diversity in PFGE analysis. This is the first report of E. coli isolates carrying $bla_{CMY-6}$ in chicken from South Korea. The emergence of CMY-6 ESBLs in a population of poultry suggests that extensive screening with long-term surveillance is necessary to prevent the dissemination of ESBL from chicken to human.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.448-453
• /
• 2018

PV module protective film plays an important role in protecting the solar cell from external environment by anti-hydrolysis polyester, UV resistance and mechanical properties. The backsheet was manufactured by using Roll-to-Roll dry laminating process. The backsheet structure is composed of 3 layers, which are PE, PET, and Fluorine polymer films. In this study, we have experimented the variation of thermal conductivities depending on MgO inputs 10% to 25% in order to confirm the dependence of the module efficiencies. High thermal conductive backsheet can increase the module output power efficiency because the heat is dissipated by spreading out the internal heat. Long-term environment weatherability tests were conducted for confirming 25 year reliability in the field such as PCT, UV, and power efficiency degradations. As the evaluation result, high thermal conductivity can be effective for increase of power efficiency of solar panel by using thermal conductive MgO masterbatch.

• The Korean Journal of Ceramics
• /
• 제3권2호
• /
• pp.92-95
• /
• 1997

Because of the novel characteristics such as chemical stability, hardness, electrical resistivity and thermal conductivity, diamond-like carbon (DLC) film is a suitable material for the passivation layers. For this purpose, using the PECVD, DLC films were synthesized at room temperature. The adhesion and the hardness of the DLC films deposited on Si an SiO2 substrate were measured. The resistivity of 5.3$\times$$10^8$$\Omega$.cm was measured by automatic spreading resistance probe analysis method. The thermal conductivities of different DLC films were measured and compared with that of phospho silicate glass (PSG) film which is commonly used as passivation layers. The thermal conductivity of DLC film was improved by increasing hydrogen flow rate up to 90 sccm and was better than that of PSG film. The patterning techniques of the DLC film developed using the RIE and the lift-off method to form 5$\mu\textrm{m}$ line. Finally, the thermal characteristics of the power transistor with the DLC film as passiviation layer was analyzed.

• Journal of Computing Science and Engineering
• /
• 제7권3호
• /
• pp.187-197
• /
• 2013

Security has long been a challenging problem in wireless networks, mainly due to its broadcast nature of communication. This opens up simple yet effective measures to thwart useful communications between legitimate radios. Spread spectrum technologies, such as direct sequence spread spectrum (DSSS), have been developed as effective countermeasures against, for example, jamming attacks. This paper surveys previous research on securing a DSSS channel even further, using physical layer attributes-keyless DSSS mechanisms, and watermarked DSSS (WDSSS) schemes. The former has been motivated by the fact that it is still an open question to establish and share the secret spread sequence between the transmitter and the receiver without being noticed by adversaries. The basic idea of the latter is to exploit the redundancy inherent in DSSS's spreading process to embed watermark information. It can be considered a counter measure (authentication) for an intelligent attacker who obtains the spread sequence to generate fake messages. This paper also presents and evaluates an adaptive DSSS scheme that takes both jam resistance and communication efficiency into account.

• Archives of Pharmacal Research
• /
• 제12권4호
• /
• pp.249-253
• /
• 1989

High producers or blocked mutants of aminoglycoside antibiotic-producing Streptomyces spp. were selected by application of an agar plug method and by culturing individual colonies in broth. The productivities of aminoglycoside antibiotic producing organisms were increased by selection of a high producer from colonies obtained by spreading spores of wild strain, or survived from treatment of a mutagen or from the colonies regenerated from protoplast-formation and cell-wall regenerations. Some mutagen treated colonies lost the ability to produce antibiotics (5-8%). Some A-factor negative and deostreptamine or streptidine negative mutants were obtained by N-methyl-N'-nitro-N-nitrosomethylguanidine (MNNG) treatment. Many of the survivors from the MNNG treatment lost the ability to produce antibiotics. Major colonies produced less amount of antibiotics ; only few survived colonies produced more antibiotics than the parent. Resistance of Streptomyces spp. against the antibiotics produced by itself was also markedly affected by mutagen treatment.

• 한국재료학회지
• /
• 제27권11호
• /
• pp.583-589
• /
• 2017

Ceramic ink-jet printing has become a widespread technology in ceramic tile and ceramicware industries, due to its capability of manufacturing products on demand with various designs. Generally, thermally stable ceramic inks of digital primary colors(cyan, magenta, yellow, black) are required for ink-jet printing of full color image on ceramic tile. Here, we synthesized an aqueous glass-ceramic ink, which is free of Volatile organic compound(VOC) evolution, and investigated its inkjet printability. $CoAl_2O_4$ inorganic pigment and glass frit were dispersed in aqueous solution, and rheological behavior was optimized. The formulated glass-ceramic ink was suitably jetted as single sphere-shaped droplets without satellite drops. After ink-jet printing and firing processes, the printed glass-ceramic ink pattern on glazed ceramic tile was stably maintained without ink spreading phenomena and showed an improved scratch resistance.

• 전자공학회논문지A
• /
• 제29A권2호
• /
• pp.68-76
• /
• 1992

Concurrent Junction process (simultaneous formation of a silicide and a junction on the implanted substrate) by Rapid Thermal Annealig has been investigated. Electrical and material properties of CoSi$_2$ films were analyzed with Alpha Step, 4-point probe, X-ray diffraction(XRD) and Scanning Electron Microscope(SEM). And CoSi$_2$ junctions were examined with Spreading Resistance probe in order to see the redistribution of electrically activated dopants and determined the junction depth. Two step annealing process, which was 80$0^{\circ}C$ for 30sec and 100$0^{\circ}C$ for 30sec in NS12T ambient was employed to form CoSi$_2$ and shallow junctions. Resistivity of CoSi$_2$ was turned out to be 11-15${\mu}$cm and shallow junctions less than 0.1$\mu$m were successfully formed by the process. It was found that the dopant concentration at CoSi$_2$/Si interface increased as decreasing the thickness of Co films in case of $p^{+}/n$ and $n^{+}/p$ junctions while the junction depth decreased as increasing CoSiS12T thickness in case of $p^{+}/n$ junction.

• 전자공학회논문지A
• /
• 제33A권11호
• /
• pp.97-104
• /
• 1996

Because of the novel characteristics such as chemical stability, hardness, electrical resistivity and thermal conductance, diamond-like carbon (DLC) film is a suitable materials for the passivation layers. For this purpose, DLC films are synthesized under various conditions and are characterized. Adhesive stregth is excellent and increased with the increase of the hydrogen gas flow rate. The resistivity of approximately 5.3X10$^{8}{\Omega}{\cdot}cm$ is measured by automatic spreading resistance probe analysis method. The thermal conductivity of DLC films is superior to that of PSG oxide and improved by increasing the hydrogen gas flow rate. The patterning techniques of the DLC films is developed using the lift-off and RIE methods to form 5${\mu}$m line. Finally, power transistor with the DLC film as passivation layer is fabricated and analyzed. The test result shows the improsved long-term stability and higher breakdown voltage.