• Radiation Oncology Journal
• /
• v.6 no.1
• /
• pp.63-73
• /
• 1988

One hundred fifty-four patients with the carcinoma of the uterine cervix were studied retrospectively to assess the result and impact of treatment at Department of Radiation Oncology, Korea University, Hae-Wha Hospital from Feb 1981 through Dec. 1986. Prior to radiotherapy, the patients were evaluated and staged by recommendation of FIGO including physical examination, pelvic examination, cystoscopy, rectosigmoidoscopy, chest X-ray, IVP. Ba enema. Also, an additional pelvic CT scan was obtained for some of the patients. The patients were treated by radiotherapy alone or adjuvant postoperative irradiation; in case of radiation therapy only, whole pelvic irradiation was given with Co-60 teletherapy unit via AP and PA parallel opposing fields or 4-oblique fields, 180 cGy per day, 5 days per week and intracavitary insertion was performed. In satges Ia, Ib, and IIa with small primary lesion, external irradiation was initially given to pelvis up to $2,000\~3,000\;cGy/2frac{1}{2}\;-3frac{1}{2}$ weeks and then intracavitary insertion was performed using Fletcher-Mini-Declos Applicator with cesium-137 cources and followed by external irradiation of $1,000\~2,000\;cGy/1frac{1}{2}\;-2frac{1}{2}$weeks via AP and PA parallel opposing fields with midline shield to spare of bladder and rectum. However, if the primary lesion is large, external irradiation was given without midline shield. More than stages IIb, the patients were treated by external beam irradiation up to 5,400cGy/30f for 6 weeks via 4-oblique portals and at the dose of 5,040cGy/28f the field was cut 5cm from the top margin for spare of small bowel, and followed by intracavitary irradiation, If there was residual tumor an additional dose of $900\~l,200cGy/5\~7f$ was given to parametrium and/or residual tumor area. Total dose of radiation to A and B-point were as follows; A-point; In early stages, Ia, Ib, IIa; $8,000\~9,000$ B-point $5,000\~6,000 cGy$ A-point; In advanced stages IIb, IIIa, IIIb; $9,000\~10,000$ B-point $60,000\~7,000cGy$ The results were obtained and as fellows; 1 The patients distribution according to FIGO staging system were stage Ia 6, Ib 27, IIa 28, IIb 54, IIIa 12, IIIb 18, and stage IVa 9. 2. Value of CT scan were demonstration of cervix tumor mass, parametrial and pelvic side wall tumor spread, pelvic and inguinal lymph nodes metastases, and hydronephrosis. Three dimensional quantitative demonstration of tumor volume is also important in planning radiation therapy. Another advantage of CT scan was detection of recurrent tumor after radiation or surgery. 3. Local control rate of tumor according to the size was $91.3\%$ for less than 5cm in size and $44.6\%$ in tumor over 5cm (p<0.0068). 4. Thirty out of 50 recurrent sites has locoregional failures and 17 cases has distant metastases. And the para-aortic lymph nodes were the most common site for distant metastases. 5. The most common complication was temporal rectal bleeding which was controlled most by conservative management. However, 4 patients required for endoscopic cauterization. 6. The 5-year survival rates showed; stage la and Ib $95\%,\;stage\;IIa\;81\%\;stage\;lIb\;67\%,\;stage\;IIIa\;37.7\%,\;stage\;IIIb\;23\%$ and 3-year survival rate of stage IVa showed $11.6%$, retrospectively.

• Korean Journal of Veterinary Research
• /
• v.50 no.3
• /
• pp.213-220
• /
• 2010

Salmonella (S.) Enterica infection ranks among the most common food borne bacterial infections worldwide. Although there are six subspecies of S. Enterica, the vast majority of human and animal infections are caused by strains belonging to subspecies 1 serovar Typhimurium and Enteritidis. Recent reports on antibiotic resistance of Salmonella spp. are rising steadily. The increasing problem of antibiotic resistance has rekindled interest in bacteriophage to therapy. Therefore, we investigated the efficacy of bacteriophage in S. enterica serovar Enteritidis infected mice and pigs by measuring of body condition, body weight, bacterial colonization and weight of organs based on the in vitro analysis. In vitro experiment, phage cultured with S. Enteritidis showed clear lysis pattern, the plaque forming unit (PFU) of our phage culture was $1.5{\times}10^{11}PFU/mL$, and phage showed its maximum activity at 4 h post inoculation. In mouse experiment, there was no significant difference among experimental groups in the general body conditions and body weight of mice. However, there was difference in weight of liver and spleen depending on the experimental group (p < 0.05). The weight of liver and spleen were reduced by the phage treatment. Also bacterial colonization in spleen and liver were significantly reduced by the phage treatment. In pig experiment, the general body conditions and body temperature exhibited not much difference among the pigs except few pigs in group 3 which showed poor body conditions. From the feces in each group, we could isolate the S. Enteritidis only from group 3. Bacterial enrichment culture was necessary for isolating the bacteria from 5 dpi and 10 dpi, however direct isolation was possible from 15 dpi feces. In phage treated group, postmortem lesion was better than non-phage treated group. Recently, antibiotic resistance concerns on the food-borne bacterial pathogens have been increasing because of the wide spread of the antibiotics resistance genes. This concern is widely transmitted to the human related public health. As one of the alternative treatments on the bacterial pathogens, attempt using phages have been made to control the bacterial diseases. The positive possibility of the trail using phage was observed to control the S. enterica serovar Enteritidis in this study even though the further analysis has been remained.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.249-261
• /
• 2020

Coastal monitoring using multiple platforms/sensors is a very important tools for accurately understanding the changes in offshore marine environment and disaster with high temporal and spatial resolutions. However, integrated observation studies using multiple platforms and sensors are insufficient, and none of them have been evaluated for efficiency and limitation of convergence. In this study, we aimed to suggest an integrated observation method with multi-remote sensing platform and sensors, and to diagnose the utility and limitation. Integrated in situ surveys were conducted using Rhodamine WT fluorescent dye to simulate various marine disasters. In September 2019, the distribution and movement of RWT dye patches were detected using satellite (Kompsat-2/3/3A, Landsat-8 OLI, Sentinel-3 OLCI and GOCI), unmanned aircraft (Mavic 2 pro and Inspire 2), and manned aircraft platforms after injecting fluorescent dye into the waters of the South Sea-Yeosu Sea. The initial patch size of the RWT dye was 2,600 ㎡ and spread to 62,000 ㎡ about 138 minutes later. The RWT patches gradually moved southwestward from the point where they were first released,similar to the pattern of tidal current flowing southwest as the tides gradually decreased. Unmanned Aerial Vehicles (UAVs) image showed highest resolution in terms of spatial and time resolution, but the coverage area was the narrowest. In the case of satellite images, the coverage area was wide, but there were some limitations compared to other platforms in terms of operability due to the long cycle of revisiting. For Sentinel-3 OLCI and GOCI, the spectral resolution and signal-to-noise ratio (SNR) were the highest, but small fluorescent dye detection was limited in terms of spatial resolution. In the case of hyperspectral sensor mounted on manned aircraft, the spectral resolution was the highest, but this was also somewhat limited in terms of operability. From this simulation approach, multi-platform integrated observation was able to confirm that time,space and spectral resolution could be significantly improved. In the future, if this study results are linked to coastal numerical models, it will be possible to predict the transport and diffusion of contaminants, and it is expected that it can contribute to improving model accuracy by using them as input and verification data of the numerical models.

• Korean Security Journal
• /
• no.14
• /
• pp.517-534
• /
• 2007

Since the beginning of human society, there have always been struggles and competitions for survival and prosperity, terrorism is not a recent phenomenon, however in modern times it has progressed to reflect the advances in civilization and power structures. At the time of the 9.11 terrorist attacks in the U.S. A., a new world order was in the process of being established after the breakdown of the Cold War era. The attacks drove both the Western and the Islamic worlds into heightened fear of terrorism and war, which threatened the quality of life of the whole mankind. Through two war campaigns against the Islamic world, it seems the U.S. has been pushing its own militaristic security road map of the Greater Middle East democratic initiative, justifying it as a means to retaliate and eradicate the terrorist threats towards themselves. However, with its five-year lopsided victories that cost the nation almost four thousand military casualties, and the war expenses that could match the Vietnam war, the U.S. does not yet seem to be totally emancipated from the fears of terrorism. Terrorism, in itself, is a means of resisting forced rules a form of alternative competition by the weak against the strong, and a way of expressing a dismissive response against dictatorial ideas or orders which allow for no normal changes. Intrinsically, the nature of terrorism is a reaction opposing power logics. Confronted with the absolute military power of the U.S., the Islamic strategies of terrorism have begun to rapidly evolve into a new stage. The new strategies take advantage of their civilization and circumstances, they train and inspire their front-line fighters on the Internet, and issue their orders through the clandestine network of the Al Qaeda operatives. These spontaneously generated strategies have been gained speed among the second, and third Islamic generations, many of whom are now spread throughout western societies. This represents a failure of the power-driven, one-sided overseas security initiatives by the U.S., and is creating a culture of fear and distrust in western societies. It is feared that the U.S. war campaigns have made the clash of religions far worse than before, and may ever lead to global ethnic separations and large-scale population movements. Eventually, it may result in the terrorist groups, enlarged and secretly supported by the huge sums of oil money, driving all mankind into a series of irreparable catastrophes.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.11a
• /
• pp.3-31
• /
• 1997

Water has always played a significant role in the lives of people. In urbanised Rome, with its million people. sophisticated supply systems developed and then fled with the empire. only to be rediscovered later But it was the industrial Revolution commencing in the eighteenth century that ushered in major paradigm shifts In use and altitudes towards water. Rapid and concentrated urbanisation brought problems of expanded demands for drinking supplies, waste management and disease. The strategy of using water from local streams, springs and village wells collapsed under the onslaughts of rising urban demands and pollution due to poor waste disposal practices. Expanding travel (railways. and steamships) aided the spread of disease. In England. public health crises peaks, related to water-borne typhoid and the three major cholera outbreaks occurred in the late eighteenth and early nineteenth century respectively. Technological, engineering and institutional responses were successful in solving the public health problem. it is generally accepted that the putting of water into pipe networks both for a clean drinking supply, as well as using it as a transport medium for removal of human and other wastes, played a significant role in towering death rates due to waterborne diseases such as cholera and typhoid towards the end of the nineteenth century. Today, similar principles apply. A recent World Bank report Indicates that there can be upto 76％ reduction in illness when major water and sanitation improvements occur in developing countries. Water management, technology and thinking in Australia were relatively stable in the twentieth century up to the mid to late 1970s. Groundwater sources were investigated and developed for towns and agriculture. Dams were built, and pipe networks extended both for supply and waste water management. The management paradigms in Australia were essentially extensions of European strategies with the minor adaptions due to climate and hydrogeology. During the 1970s and 1980s in Australia, it was realised increasingly that a knowledge of groundwater and hydrogeological processes were critical to pollution prevention, the development of sound waste management and the problems of salinity. Many millions of dollars have been both saved and generated as a consequence. This is especially in relation to domestic waste management and the disposal of aluminium refinery waste in New South Wales. Major institutional changes in public sector water management are occurring in Australia. Upheveals and change have now reached ail states in Australia with various approaches being followed. Market thinking, corporatisation, privatisation, internationalisation, downsizing and environmental pressures are all playing their role in this paradigm shift. One casualty of this turmoil is the progressive erosion of the public sector skillbase and this may become a serious issue should a public health crisis occur such as a water borne disease. Such crises have arisen over recent times. A complete rethink of the urban water cycle is going on right now in Australia both at the State and Federal level. We are on the threshold of significant change in how we use and manage water, both as a supply and a waste transporter in Urban environments especially. Substantial replacement of the pipe system will be needed in 25 to 30 years time and this will cost billions of dollars. The competition for water between imgation needs and environmental requirements in Australia and overseas will continue to be an issue in rural areas. This will be especially heightened by the rising demand for irrigation produced food as the world's population grows. Rapid urbanisation and industrialisation in the emerging S.E Asian countries are currently producing considerable demands for water management skills and Infrastructure development. This trend e expected to grow. There are also severe water shortages in the Middle East to such an extent that wars may be fought over water issues. Environmental public health crises and shortages will help drive the trends.

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.6
• /
• pp.504-511
• /
• 2008

Background: Particulate matter may be toxic to human tissue. Ambient air particulate matter ${\leq}10{\mu}m$ in aerodynamic size ($PM_{10}$), which changes under different environmental conditions, is a complex mixture of organic and inorganic compounds. The Asian dust event caused by meteorological phenomena can also spread unique particulate matter in affected areas. We evaluated production of ROS, $TGF-{\beta}$, fibronectin, and $NF{\kappa}B$ by exposing normal epithelial cells to Asian dust particulate matter. Methods: Bronchial epithelial cells were exposed to 0, 50, ${\leq}100{\mu}g/ml$ of a suspension of $PM_{10}$ for 24 h. ROS were detected by measurement of DCF release from DCF-DA by FACScan. $TGF-{\beta}$, fibronectin, and $NF{\kappa}B$ were detected by western blotting. Results: $PM_{10}$ exposure increased the expression of $TGF-{\beta}$, fibronectin, and $NF{\kappa}B$. ROS production and $TGF-{\beta}$ levels were significantly higher with 50 or ${\leq}100{\mu}g/ml$ $PM_{10}$. Fibronectin and $NF{\kappa}B$ production were significantly higher after ${\leq}100{\mu}g/ml$ of $PM_{10}$. Conclusion: $PM_{10}$ from Asian dust particles might have fibrotic potential in bronchial epithelial cells via ROS induction after $PM_{10}$ exposure.

• Journal of forensic and investigative science
• /
• v.2 no.1
• /
• pp.5-22
• /
• 2007

From the numerous social problems generated by the unbalanced social development and the social trend of belittling life overall, we found the causes of suicide getting worse in its seriousness day by day. In reality, the problem has been approached in a collateral level in contrast with other social problems. There have been an active involvement in studying the definition, causes and ways of prevention of suicide theoretically until now. However, different from other social problems, it is almost impossible to treat or fix the problem of suicide. Only ways to treat or fix the problem is when the suicide has ended in failure. Thus, this study intends to examine the suicide rate among the total accidents during the year 2005, perform the analyses on the actual causes according to the relations such as the means of suicide, occupation, age group, educational background, etc. In order to present a solution to the issue of suicide becoming serious each day. Among the total accidents in 2005, the suicide rate came out to be approximately 52.4%. Among the result, 52.4%, male with 69% resulted higher than female with 31%, which appears to be related to the social functions. While men tends to take more active(80%) means of suicide like jumping off, poison, hanging, etc., women tends to take more passive(60%) means of suicide like sleeping pills, slitting wrist, etc. In terms of the cause, pessimism, illness, denial, mental disorder, etc resulted more than 75%, and there were many cases of suicide after exhibiting the signs of depression. Also there were higher suicide rate of the unemployed engaged in direct labor with educational background lower than college level related to the pessimism regarding the family living cost. We were able to determine the recent increase in the suicidal tendency of the educated people higher than the college level and the retired people with depression caused by the sudden change in social status. Overall there are several reasons for suicide, however, in most cases the signs of depression were exhibited until the final suicide, which tells us the serious psychological problem of suicide. Assuming that the current development of suicide will continue in future, the result of this study will guide the corresponding social policies, be utilized in preparing the insurance or management at the national level dealing with the real social problems that are not just a conflict of an individual, but could spread like a fad and become much bigger than the present by the continuous support at the environmental, social and political levels, and be utilized as the basic data to establish the research plan.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.267-286
• /
• 2013

Recently, the advanced company has been sparing no efforts in improving necessary core knowledge and technology to achieve outstanding work performance. In this rapidly changing knowledge-based society, the company has confronted the task of creating a high value-added knowledge. The role of R&D workforce that corresponds to the characteristic and role of knowledge worker is getting more significant. As the life cycle of technical knowledge and skill shortens, in every industry, the technical knowledge and skill have become essential elements for successful business. It is difficult to improve competitiveness of the company without enhancing the competency of individual and organization. As the competency development which is a part of human resource management in the company is being spread now, it is required to focus on the research of determining necessary competency and to analyze the competency of a core organization in the research institute. 'H' is the semiconductor manufacturing company which has a affiliated research institute with its own R&D engineers. Based on focus group interview and job analysis data, vision and necessary competency were confirmed. And to confirm whether the required competency by job is different or not, analysis was performed by dividing members into workers who are in charge of circuit design and design before process development and who are in the process actualization and process development. Also, this research included members' importance awareness of the determined competency. The interview and job analysis were integrated and analyzed after arranging by groups and contents and the analyzed results were resorted after comparative analysis with a competency dictionary of Spencer & Spencer and competency models which are developed from the advanced research. Derived main competencies are: challenge, responsibility, and prediction/responsiveness, planning a new business, achievement -oriented, training, cooperation, self-development, analytic thinking, scheduling, motivation, communication, commercialization of technology, information gathering, professionalism on the job, and professionalism outside of work. The highly required competency for both jobs was 'Professionalism'. 'Attitude', 'Performance Management', 'Teamwork' for workers in charge of circuit design and 'Challenge', 'Training', 'Professionalism on the job' and 'Communication' were recognized to be required competency for those who are in charge of process actualization and process development. With above results, this research has determined the necessary competency that the 'H' company's affiliated research institute needs and found the difference of required competency by job. Also, it has suggested more enthusiastic education methods or various kinds of education by confirming the importance awareness of competency and individual's level of awareness about the competency.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.434-442
• /
• 2015

The process of cultivation and production of oak mushroom (Lentinula edodes (Berk.) Pegler) on sawdust surface beds were investigated. Sawdust surface bed cultivation is the method by which oak mushrooms are cultured and produced on sterilized sawdust surface bed without using bags. The bed was made by inoculating with 3 to 1 ratio of bed sawdust to oak mushroom mycelial inoculum. The sawdust bed medium with 65% water content was pasteurized at $65^{\circ}C$, inoculated with sawdust spawn and spread on the surface on vinyl film in cultivation shed. During 78 days of cultivation period, water content in the medium varied from 61 to 72%, its pH decreased from 5.6 to 3.9~4.6 and ergosterol concentration increased to $0.33{\sim}0.59{\mu}g/g$. $CO_2$ concentration in the medium rapidly increased to 8.06% in two weeks. In seven weeks the medium surface started browning and $CO_2$ concentration increased to about 5.63%. Until 11th week the $CO_2$ concentration was maintained at 6~7%. After removing the plastic cover on the bed for ventilation in 12 weeks, $CO_2$ within the bed reduced dramatically to 1.5%. In the cultivation shed the internal temperature was $7.1{\sim}29^{\circ}C$ and humidity was 27.3 to 100%, while bed temperature ranged $11.6{\sim}30^{\circ}C$. Oak mushroom fruiting started from late July, in 120 days after bed establishment in late March and continued for approximately 100 days until early December with eight cycles of irrigation treatment. The mushroom yield of the eight cycles were 288~352 kg during the 1st (7/29~8/4) to 3rd cycle (9/3~9/7), 800 kg at the 4th cycle (9/19~9/24), 1,296~1,853 kg during 5th (10/3~10/8) to 7th cycle (4.11~11/9) and 990 kg at 8th cycle (11/23~12/7). Total production was approximately 7.4 tons from 33.0 tons of oak sawdust medium, thus harvest efficiency of the mushroom production was approximately 22.4%.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.344-355
• /
• 2012

This study was conducted to analyze on the operational time and productivities of logging operations in whole-tree logging operation system by tower-yarder and swing-yarder, and in cut-to-length logging operation system by excavator with grapple in order to establish the efficient logging operation system and to spread logging operation technique. In the analysis of operational time, in case of whole-tree logging operation system, the felling time was 46.6 sec/cycle by chain saw, the yarding time was 480.6 sec/cycle by tower-yarder, the yarding time was 287.4 sec/cycle by swing-yarder and the bucking time was 155.14 sec/cycle by chain saw. In case of the cut-to-length logging operation system, the felling and bucking time was 225.65 sec/cycle by chain saw, the cut-to-length extraction time was 4,972 sec/cycle by excavator with grapple, the branches and leaves extraction time was 3,143 sec/cycle by excavator with grapple. The forwarding time was 4,688 sec/cycle by wheel type mini-forwarder, the forwarding time was 2,118 sec/cycle by excavator with grapple and small forwarding vehicle. In the analysis of operational productivities, in case of whole-tree logging operation system, the average felling performance was $57.89m^3/day$ by chain saw, the average yarding performance was $20.3m^3/day$ by tower-yarder, $31.55m^3/day$ by swing-yarder respectively, the average bucking performance was $20.3m^3/day$ by chain saw. In case of the cut-to-length logging operation system, the average felling and bucking performance was $11.96m^3/day$ by chain saw, the average cut-to-length extraction performance was $34.75m^3/day$ by excavator with grapple, the average branches and leaves extraction performance was $37.66m^3/day$ by excavator with grapple, the average length of operation road construction was 73.8 m/day by excavator with grapple. The average forwarding performance by wheel type mini-forwarder and the average forwarding performance by excavator with grapple and small forwarding vehicle was $15.73m^3/day$ and $65.03m^3/day$, respectively.