• Journal of Biosystems Engineering
• /
• v.26 no.4
• /
• pp.355-362
• /
• 2001

Uniform application of agri-chemicals will improve orchard pest management. An air-blast(orchard) sprayer designed for vineyards has been used: however, few research on the uniformity and coverage of the sprays has been reported. Distributions of spray coverage were measured with artificial targets and analyzed to enhance the efficiency of spray application. A structure was built to place water sensitive papers, sampling spray droplets blasted from the orchard sprayer. The sampling cards were collected from five directions at three distances (2.5, 3.0 and 3.5m) for two fan speeds (2,075 and 3,031 rpm), and analyzed using an image analysis system. The distribution of the coverage percent area did not follow the wind velocity pattern. The coverage by the low fan speed was more uniform and higher than that by the higher fan speed. The coverage percent area decreased with an increase of distance. The distribution of droplet density was similar to that of coverage. However, the coverage contribution by smaller droplets became more significant as the distance increased. The upward blasting distance was limited within 3m, but the limit to the ground level was expanded the distance more than 3.5m because of the concentrated droplets.

• Journal of Biosystems Engineering
• /
• v.29 no.1
• /
• pp.21-28
• /
• 2004

Spraying is one of the most efficient methods for pesticide and insecticide control. Generally, orchard sprayers(aircarrier sprayer) are used for such applications. However, when an orchard sprayer is used, only 20% of total amount of spray deposits on the target. The rest of spray are not only wasted but are also potential sources of environmental pollution. The research far the development of electrostatic spraying system for orchard sprayer was conducted to develop the new pesticide application technology for the reduction of environmental pollution and f3r the production of safe agricultural products. The spray characteristics for nozzles with the different charging methods were tested and the effect of electrostatic charge was analyzed, in the laboratory experiments. The results of this study indicate that the capacitive type of electrostatic spraying nozzle exhibits a large current deposition of water sprays on the sample target. The covering area ratio by conventional spraying system was 10.2%, while that of electrostatic sprays with pulse induction charging method gave the increased covering area ratio by 4.3 times.

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.146-152
• /
• 2006

Most upland in Korea have irregular field shapes. Boom sprayers working alone winding row will show considerable differences of spraying amount per unit area between left and right booms. If flow rates of both booms are equal. This phenomenon becomes significant as steering radius of sprayer decreases. This study was performed to seek a method which reduce the difference of the spray amount between left, right and center booms while spraying along curvy rows. A flow rate control method for keeping application rate of each boom section constant was proposed and experimentally proved using a boom sprayer attached to a cultivating tractor. The flow rate control device was composed of 3 ball valves and a rotary angle sensor. The rotary angle sensor showed a symmetric voltage output with respect to steering radius. The spray overlapping was happened in a boom nearby the steering center when steering radius of the sprayer was less than 5.2 m. Flow rates for left, right and center booms were regulated using ball valves based on the steering radius and spraying areas ration of right/left boom. The Maximum spraying area ratio ($S_{LR}$) of left to right boom section was 1:3.6 at the steering radius of 5.2 m. However, The Maximum achieved right and left spraying flow ratio was 1:2.7.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.749-756
• /
• 2000

Chemical application, one of the most important crop management processes happened to cause spray drift, that would threaten farmers in field as well as dwellers in rural region. Spray drift was affected by micro-meteorological parameters. In Korea, a boom sprayer was introduced but good effects of a boom sprayer was not evaluated. A study to evaluate short distance drift characteristics of a boom sprayer in paddy fields has been undergoing and determining wind characteristics in paddy field was the main purpose of this paper. Micro-meteorological information has been pre-requisite information for evaluating drift in both long and short distances or in both theoretical and experimental ways. Wind velocity, Reynolds stresses, turbulence intensity, skewness, kurtosis etc. were evaluated with height from the ground using a 2-dimensional probe and a hot wire anemometer system.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.811-818
• /
• 2000

Agricultural chemicals spraying is one of the most efficient methods for pesticides control. General farming groups use Speed Sprayer but its deposition amount on practical crops is only 20% of total amount in SS case. Agricultural chemicals which fail to arrive the crops not only cause environmental contamination but loss of agriculture chemicals by lower deposition efficiency. For the purpose of improvement of these problems, this experiment proposes SS attachment type electrostatic induction spraying apparatus with DC power which improves deposition efficiency of agriculture chemicals on the crops.

• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.155-166
• /
• 1996

A direct injection sprayer was designed using the concepts of injection mixing and total flow control, flowrate-based system compensating for the variation of forwarding speed. A metered rate, proportionally to the actual diluent flow rate, of a tracer chemical was injected directly into the diluent stream. The injection of chemical may improve the precision and safety of chemical application process. The control system was evaluated for the variables of the control interval, tolerances and sensitivities of flow regulation valve and injection pump. Performance of the system was assessed as that the response time of flow rate, response time of injection rate, absolute steady state error, and the coefficient of variance(C.V.) of concentration were 8.5 and -0.53 seconds, 0.067 lpm(0.8%) and 3.15%, respectively, at optimal parameters of control interval of 1.0 sec, fast sensitivity of flow regulation valve, medium sensitivity of injection pump and medium tolerance of flow rate. Performance of the system can be improved by increasing the sensitivity of flow regulating valve and employing a high resolution velocimeter, such as Doppler radar.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.151-162
• /
• 1997

Chemical application is one of the most important field operation in rice production. Rolling of a boom due to local unevenness and softness in fields causes a local under/over-application of spray. In this study, the vertical movement of boom tips due to unevenness of ground in paddy fields was investigated, and an active pendulum suspension control system was designed and tested for compensating the movement and balancing the boom to the ground. The results for testing the performance of the control system showed that the system could balance the boom both in flat and inclined fields. The active pendulum control system developed in this study could be properly used for improving spraying performance of a boom sprayer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.5
• /
• pp.405-410
• /
• 2009

The conventional ultrasonic nozzle produces a mist by applying an ultrasonic vibration into a non-flowering liquid. In this paper, we first present a novel designed nozzle type sprayer that is able to apply an ultrasonic vibration directly to the moving liquid and generate a mist instantly. For the novel nozzle, a ring-type actuator of the novel nozzle was designed and built using the PZW-PMN-PZT ceramics. This paper will describe a variety of physical, mechanical, and electrical characteristics of the ultrasonic nozzle. The characteristics of the mist particles was also measured as the amount of the outflow liquid was varied.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.169-174
• /
• 2003

농업기계의 이용도 제고를 위해서는 원활한 부품공급에 의한 신속한 수리가 이루어 져야 한다. 특히 작업시기가 한정되어 있는 농업기계의 경우 고장발생시 신속한 수리가 이루어지지 않는다면 적기작업에 차질은 빚음은 물론 수리비부담과 시간까지 허비하게 되어 농업기계 이용비용을 가중시키게 된다. (중략)

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.407-415
• /
• 2011

Damage to agricultural production caused by insects and diseases affects farming yields. The orchard sprayer is mainly used in the country to protect the fruit in a large area, with less effort and at minimum cost. The excellent performance of the air blast spray increases the fruit protection. Chemical application in orchards has been accomplished by the orchard sprayers with air assist nozzles and a axial fan in Korea. However, the orchard sprayers without ROPS resulted in severe injury or death when operators drive the sprayers improperly on hilly orchard or farming road. This study was to develop a ROPS for the orchard sprayers improving farmer's safety. In this study, the accident case was used in analysing the design and building TOP structure of the orchard sprayer. The maximum impact, body torsion frame structures including the driver's protection are also analysed for adherence to safety regulations. The ROPS safety regulations according to the strength test results were established.