• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.3
• /
• pp.367-373
• /
• 2003

The present study investigates the fire suppression characteristics using a water mist fire suppression system. The fire extinguishing times are measured for various fire sources, fuel types, and different total flooding rates of water mist. Pool fire with hydrocabon fuel is successfully extinguished within a minute under the operating conditions of the water mist system. Two different regimes of the smoke layer cooling are observed, such as rapid and slow cooling processes. The regimes are divided by threshold time which is calculated with auto-correlation function. The threshold time for the initial cooling decreases with increasing water flow-rates and fire sources. These initial cooling effects play an important role in preventing the occurance of flashover fire by the initial fire suppression.

• Korean Journal of Pharmacognosy
• /
• v.23 no.3
• /
• pp.153-157
• /
• 1992

The deodorizing responses of the steam distillate from some medicinal plants(G-3) on three representative malodors were evaluated by estimating the best estimate threshold(BET) of odor responses. With a single spray of G-3, the BETs of malodors such as ammonia, acetic acid, and ethyl acetate were found to increase 4.11, 32.6 and 13.1 fold, respectively, which indicated G-3 possessed a potent deodorizing activity. The deodorizing potency of G-3 was also demonstrated to be as high as and even higher than those of the commercial deodorizing agents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.483-489
• /
• 2017

The purpose of this study was to propose useful suggestions for enhancing reliability to determine the resistance against surface wetting, KS K 0590, by an imaging process. We validated the standard spray test rating chart for determining quantification standard using JAVA script-based imaging process program. All of the acquired images were processed with the image software, Image J (NIH, Nethesda, MD, USA). The study results are as follows. We established the surface area measurement-based quantitative criteria for determining resistance to surface wetting. The standard spray test rating chart was converted into a numerical standard which leads easy-to-determine ratings. We also validated the procedure for imaging treatment by analyzing quantitative data. We introduced the fluorescence image for determining ratings by enabling threshold settings and binary image conversion as an optimal imaging process. It is expected that imaging-based determination for resistant to surface wetting will serve as an accurate and reliable method for KS K 0590.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.4 no.2
• /
• pp.133-136
• /
• 2002

Whitefly, Dialeuropora decempuncta (Quaintance rind Baker) (Homoptera: Aleyrodidae) has attained the major pest status in mulberry, causing 24% crop loss by sucking the leaf juice and manifesting leaf curl, chlorosis and sooty mould desease during monsoon season in West Bengal, India. The assessment of economic threshold revel is an essential component for formulating the management practices. Experiments were carried out by inoculating five different densities of whitefly viz.,10, 20, 30, 40 and 50 adults on covered mulberry plants in glass houses. From the findings, it was observed that irrespective of released density, no crop loss was observed in the initial period. But with the passing of days, the percent crop loss was increased rapidly. The linear relationship between percent crop loss and number of adults released was established to highlight the significance of economic threshold. The statistical analysis in the linear form of equation showed that initial population of 10, 20, 30, 40 and 50 whiteflies/plant causes 3%, 12%, 21%, 30% and 40% crop loss in a period of 28 days which is equivalent to 57 kg, 247 kg, 437 kg, 626 kg and 816 kg leaf/acre. Execution of management practices (spray of 0.01% monocrotophos) are economical to the farmer whenever the loss is above 247 kg/acre, but below which application of control measures is not economical. From this study, it can be inferred that the economic threshold level far whitefly is 20 individuals/plant beyond which a farmer has to take appropriate control measures.

• Journal of ILASS-Korea
• /
• v.21 no.2
• /
• pp.88-94
• /
• 2016

In this study digital holographic microscopy system for measurements of 3-D velocities of particles in MR fluid is developed. Holograms are recorded using either a CCD camera with a double pulse laser or a high-speed camera with a continuous laser. To process recorded holograms, the correlation coefficient method is used for focal plane determination of particles. To remove noise and improve the quality of holograms and reconstructed images, a Wiener filter is adopted. The two-threshold and image segmentation methods are used for binary image transformation. For particle pairing, the match probability method is adopted. The developed system will be applied to measurements of the characteristics of unsteady 3-D particle velocities in MR fluids through the next stage of this study.

• Journal of ILASS-Korea
• /
• v.26 no.3
• /
• pp.142-148
• /
• 2021

The objective of this study is to analyze the basic flame behavior characteristics using the single fuel droplet combustion of diesel, palm-based biodiesel, and canola-based biodiesel. The results were compared and analyzed through the post processed image, which was applied the threshold level for removing noise in the raw image. The raw image was taken by a high-speed camera during the entire combustion process. At the same time, the maximum flame length, which was measured by the application code of the MATLAB program, the ignition delay, and the combustion period were compared and analyzed.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.211-219
• /
• 2017

The spray-applied waterproofing membrane is installed on shotcrete or concrete surface to make impermeable layer with 3-5 mm thick for the purpose of waterproofing. This study aims to determine the internal structure of a spray-applied waterproofing membrane including pores by using X-ray CT technique. Before obtaining X-ray images of the membrane specimens, a waterproof performance test was performed on the membrane specimens with a water pressure of 500 kPa for 28 days. Results show that the movement of moisture is made through micropores. This is based on the fact that the large pores inside the membrane are not saturated and the degrees of saturation of the micropores are high. X-ray image is effective for determining the pore size distribution and whether the membrane with pores contains the water However, it is necessary to pay attention to the determination of water content, since water content may vary depending on the threshold value of X-ray image analysis applied to calculate the water content.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.573-583
• /
• 2005

Fugitive dust, which is emitted in the ambient air without first passing through a stack or duct designed to control flow, is frequently generated by means of wind erosion from storage yards at Pohang Steel Wokrs. The size distribution of fugitive dust is mostly in the range of coarse particulate which is deposited as soon as emitted and less harm to human health; however $20\%$ of fugitive dust contains PM 10 known as one of most harmful airborne pollutant. Consequently, effective control and reduction of fugitive dust is strongly requested by the local society, but it is not easy so far because the generation and dispersion of fugitive dust highly depends on meteorological conditions, and it being occurred for irregularity. This research presented a fugitive dust control system for each meteorological condition by providing statistical prediction data obtained from a statistical analysis on the probability of generating the threshold velocity at which the fugitive dust begins to occur, and the frequency occurring by season and by time of the wind direction that can generate atmospheric pollution when the dispersed dust spreads to adjacent residential areas. The research also built a fugitive dust detection system which monitors the weather conditions surrounding storage yards and the changes in air quality on a real-time basis and issues a warning message by identifying a situation where the fugitive dust disperses outside the site boundary line so that appropriate measures can be taken on a timely basis. Furthermore, in respect to the spraying of water to prevent the generation of fugitive dust from the storage piles at the storage yard, an advanced statistical meteorological analysis on the weather conditions in Pohang area and a case study of fugitive dust dispersion toward outside of working field during $2002\∼2003$ were carried out in order to decide an optimal water-spraying time and the number of spraying that can prevent the origin of fugitive dust emission. The results of this research are expected to create extremely significant effects in improving surrounding environment through actual reduction of the fugitive dust produced from the storage yard of Pohang Steel Works by providing a high-tech warning system capable of constantly monitoring the leakage of fugitive dust and water-spray guidance that can maximize the water-spraying effects.

• Korean journal of applied entomology
• /
• v.50 no.2
• /
• pp.151-156
• /
• 2011

Economic injury levels (EILs) and economic control threshold (ET) were estimated for the Tea red spider mite, Tetranychus kanzawai Kishida(Acari, Tetranychidae) in Rubus coreanus Miquel. T. kanzawai density increased until the early-July and thereafter decreased in all plots except the non-innoculation plot where initial density of the mite were different each 0, 5, 10, 20 and 40 adults per plant branch on May 7 in 2008. And the occurrence of the densities were increased higher innoculated density than different innoculation density. The yield was decreased with increasing initial mite density and thereby the rates of yield loss was increased with increasing initial mite density. And T. kanzawai occurrence density, yields and the rates of yield loss, where initial density of the mite were different each 0, 2, 5, 10 and 20 adults per plant branch on May 8 in 2009 were similar tendency to 2008 year results. The relationship between initial T. kanzawai densities and the yield losses was well described by a linear regression, Y = 0.6545X + 3.0425 ($R^2$ = 0.93) in 2008, Y = 0.9031X + 2.0899($R^2$ = 0.96) in 2009. Based on the relationship, the number of adults per plant branch(EILs) which can cause 5% loss of yield was estimated to be approximately 3.0 in 2008 and 3.2 in 2009. And the ET was estimated to be approximately 2.4 in 2008 and 2.6 in 2009. The relationship between initial T. kanzawai densities and occurrence density of mid-May considering the best spray timing against T. kanzawai was well described by a linear regression, Y = 0.471X + 2.495($R^2$ = 0.95) in 2008, Y = 0.9938X + 3.1858($R^2$ = 0.96) in 2009. Based on the relationship, the number of adults per leaf(ET) in mid-May which can cause 5% loss of yield was estimated to be approximately 3.6 in 2008 and 5.8 in 2009.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.6
• /
• pp.155-164
• /
• 2023

Sedirea japonica is one of the critically endangered species in South Korea mostly due to artificial harms such as illegal collection and habitat destruction. Therefore, artificial propagation through improving germination rate, increasing growth, and controlling flowering is meaningful for the conservation and reintroduction of S. japonica. It is suggested that cytokinins are one of the multi-factors that contribute to plant growth and floral responses. Especially, exogenous cytokinins have been known to induce or promote shoot growth or earlier flowering in orchids. Therefore, it was investigated how the application of 6-benzylaminopurine (BA) influenced the growth and inflorescence of S. japonica. A foliar spray containing BA at 100, 200, 300, and 400 ppm was applied from 1st July to 30th December 2021. Leaf length, leaf length growth rate, leaf width, and width and length ratio were measured as growth-related factors. Visible inflorescence rate, inflorescence length, the number of flowers per inflorescence, and the distance between the stalks were measured as flowering-related factors. Growth-related factors except for leaf growth rate were not affected by BA treatments, while leaf growth rate was significantly increased by 200 ppm of BA treatment. The visible inflorescence rate increased by 200 ppm of BA treatment, and there seems an optimal concentration and threshold of BA treatment. An iterative experiment with more seedlings and measurement factors would be helpful to figure out the effects of exogenous BA treatment on S. japonica, and it can be applied for mass propagation.