• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.570-573
• /
• 2005

분무법을 이용한 alginate microsphere를 제조한 결과 구형을 형성하는 것을 관찰하였고, 이러한 alginate microsphere에서 alginate 농도가 증가할수록 크기는 작아지고, chitosan/alginate microsphere에서 chitosan의 농도가 증가할수록 그 크기가 증가하는 것을 확인하였다. OVA의 방출정도는 alginate microsphere에서 alginate 농도가 증가할수록 잘 이루어지지 않았고, HCl buffer에서보다 PBS buffer에서 방출이 잘되는 것을 확인하였다. Chitosan/alginate microspheres에서는 chitosan의 농도가 증가할수록 방출이 잘되지 않았고, 이는 alginate microsphere에서와 마찬가지로 PBS buffer에서 방출이 잘 이루어지는 것을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.195-203
• /
• 2003

실물형 Unlike 충돌형 triplet 분사기인 F-O-F형과 O-F-O형의 분무특성 및 혼합특성을 실험적으로 알아보았다. 각각의 분사기에 대해 산화제와 연료의 운동량비의 변화에 따라 분무형상과 케로신/물을 이용한 혼합효율을 측정하였다. 분무형상은 Stroboscope와 CCD camera를 이용한 직접사진기법으로, 혼합효율은 Mechanical Patternator를 이용하였다. O-F-O형 분사기가 미립화 특성이 우수함을 알 수 있었고, 운동량비가 증가함에 따라 혼합효율이 급격히 감소함을 알 수 있었다.

• 대한기계학회논문집
• /
• 제12권3호
• /
• pp.566-574
• /
• 1988

본 연구에서는 LDV의 수광계를 비임의 진행방향에 수직한 방향으로 위치시켜 분무액적에 의한 반사 산란성분을 수광하여 검출되는 신호의 가시도에 의해 액적크기 를 측정함과 동시에 도플러변화 주파수로부터 속도를 측정하고, 이 방법의 신뢰도를 충돌식 포진법에 의하여 측정한 결과와 비교하므로써 평가하여, 관측각 90˚의 측방 산란형 LDV에 의한 분무액적의 크기와 속도의 동시측정에 관한 유용성을 살펴보고자 한다.

• 대한기계학회논문집B
• /
• 제21권8호
• /
• pp.1056-1067
• /
• 1997

Present study visualized flow pattern and investigated spray characteristics of twin-fluid atomization with converging-diverging nozzles. Particle sizes were measured by using the Malvern particle analyzer, and the radial size distributions were evaluated by using the tomographic transform technique. The results show that the SMD generally increases in the radial direction at a prescribed liquid flow rate and the increasing rate in the SMD becomes gradual as atomizing gas pressure increases. The SMD decreases as the liquid flow rate increases at a fixed GLR (gas/liquid mass ratio). The atomization performance of the protrusion-type nozzle turned out to be superior to that of the flush-type. However, in the case of the protrusion-type, flow separation occurs outside the liquid delivery tube when the pressure at the gas nozzle chamber is high enough, which may deteriorate the atomization performance.

• Journal of Biosystems Engineering
• /
• 제26권4호
• /
• pp.355-362
• /
• 2001

Uniform application of agri-chemicals will improve orchard pest management. An air-blast(orchard) sprayer designed for vineyards has been used: however, few research on the uniformity and coverage of the sprays has been reported. Distributions of spray coverage were measured with artificial targets and analyzed to enhance the efficiency of spray application. A structure was built to place water sensitive papers, sampling spray droplets blasted from the orchard sprayer. The sampling cards were collected from five directions at three distances (2.5, 3.0 and 3.5m) for two fan speeds (2,075 and 3,031 rpm), and analyzed using an image analysis system. The distribution of the coverage percent area did not follow the wind velocity pattern. The coverage by the low fan speed was more uniform and higher than that by the higher fan speed. The coverage percent area decreased with an increase of distance. The distribution of droplet density was similar to that of coverage. However, the coverage contribution by smaller droplets became more significant as the distance increased. The upward blasting distance was limited within 3m, but the limit to the ground level was expanded the distance more than 3.5m because of the concentrated droplets.

• 한국분무공학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2015

Visualization of the mixing pattern in a non-element mixer was carried out using laser induced fluorescence(LIF) to evaluate characteristics of mixer consisting of the main flow pipe and branch flow pipes. The branch flows were injected periodically with the period $T_{in}$ normal to the main flow, and rhodamine B was mixed into the most upstream branch flow to visualize mixing pattern in the main flow pipe by LIF. The length of boundary line L of the LIF image was measured. In this study, a numerical analysis was performed to identify the mixing process of the non-element mixer, and the results were compared with experimental results. Each result was almost the same. When the number of branch flows is increased, the mixing pattern became complicated and was supposed to become chaotic. The length of boundary line L increased exponentially with an increase in the number of branch flows.

• 한국분무공학회지
• /
• 제17권1호
• /
• pp.20-26
• /
• 2012

Inkjet printing is one of the direct writing technologies and is able to form a pattern onto substrate by dispensing droplets in desired position. Also, by inkjet technology manufacturing time and production costs can be reduced, and procedures can be more efficient. To form a metal pattern, it must be harmonized with conductive nano ink, printing process, sintering, and surface treatment. In this study, micro patterning of conductive line has been investigated using the piezoelectric printhead driven by a bipolar voltage signal is used to dispense $20-40{\mu}m$ diameter droplets and silver nano ink which consists of 50 nm silver particles. In addition, hydrophobic treatment of surface, overlap printing techniques, and sintering conditions with changing temperature and times to achieve higher conductivity.

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.162-168
• /
• 2005

A methodology for the objective evaluation of water repellency is studied using image analysis of the sprayed pattern on woven fabrics according to a standard spray test (AATCC Test Method 22-2001). The wet area ratio obtained from the spray standard test ranking is found to be exponentially related with its water repellency rating. Mean filtering is used to remove the effect of weave texture and the transmitted light through interyarn spaces. The ring frame of the instrument and wet region are recognized using Otsu thresholding technique. And Hough transform and outline operation are used to obtain the size and position of the ring frame. The objective assessment of the water repellency using image processing can reduce unnecessary confusion in the subjective determination of the water repellency.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권6호
• /
• pp.765-770
• /
• 2001

Thirty second parity sows of the synthetic Nepalese Pakhribas genotype were used to investigate factors which might improve the occurrence and expression of estrus. The experiment had two sequential elements. In part 1, a change in suckling pattern was applied during lactation, and in part 2, different estrus detection methods were evaluated after weaning. All sows received the same pattern of weaning, which imitated the progressive weaning system used in Nepalese villages. Piglets from each litter were weaned at three ages (6, 7 and 8 weeks of age) in the proportion of 0.5 at 6 weeks followed by 0.25 at each of the subsequent weanings. In the first lactation treatment, the suckling pattern was left undisturbed, similar to the practice used in the villages in which the remaining piglets after first weaning are allowed continuous suckling. In the other treatment, the remaining piglets after first weaning were allowed to suckle their sows only during the night, whilst in the day time (09:00-16:00) they were excluded from the sow but left free to roam around. After weaning, estrus detection procedures were carried out in the absence or presence of two different boar stimuli: a synthetic boar pheromone spray or fresh boar urine. These were applied sequentially in a sequence of testing that alternated for each sow on a daily basis. The weaning to re-mating interval was significantly longer for the unrestricted suckling treatment. All sows were re-mated within 30 days after first weaning in the restricted suckling treatment groups, whereas only 71% of sows were re-mated within 30 days after weaning in the unrestricted suckling treatment groups ($x^2=3.877$, 1df, p<0.05). Both boar pheromone spray and boar urine increased the estrus detection probability, with no significant differences between the two stimuli treatments.

• 한국분무공학회지
• /
• 제23권4호
• /
• pp.192-204
• /
• 2018

In this study, a 3D CFD analysis method for the combustion process was established for a low calorific value syngas-diesel dual-fuel engine operating under very lean fuel-air mixture condition. Also, the accuracy of computational analysis was evaluated by comparing the experimental results with the computed ones. To simulate the combustion for the dual-fuel engine, a new dual-fuel chemical kinetics set was used that was constituted by merging two verified chemical kinetic sets: n-heptane (173 species) for diesel and Gri-mech 3.0 (53 species) for syngas. For dual-fuel mode operations, the early stage of combustion was dominated by the fuel burning inside or near the spray plume. After which, the flame propagated into the syngas in the piston bowl and then proceeded toward the syngas in the squish zone. With the baseline injection system and piston shape, a significant amount of unburned syngas was discharged. To solve this problem, effects of the injection parameters and piston shape on combustion characteristics were analyzed by calculation. The change in injection variables toward increasing the spray plume volume or the penetration length were effective to cause fast burning in the vicinity of TDC by widening the spatial distribution of diesel acting as a seed of auto-ignition. As a result, the unburned syngas fraction was reduced. Changing the piston shape with the shallow depth of the piston bowl and 20% squish area ratio had a significant effect on the combustion pattern and lessened the unburned syngas fraction by half.