• FLOWER RESEARCH JOURNAL
• /
• v.19 no.3
• /
• pp.127-138
• /
• 2011

Four different plant growth retardants (PGRs), paclobutrazol, flurprimidol, daminozide, and chlormequat, were applied to potted Saxifraga rosacea 'Kumoma' and 'Kumoma-Gusa' plants for control of the growth and flowering. Paclobutrazol (10, 20, 40, $80mg{\cdot}L^{-1}$), flurprimidol (5, 10, 20, $40mg{\cdot}L^{-1}$), daminozide (500, 1000, 2000, $4000mg{\cdot}L^{-1}$), and chlormequat (50, 100, 200, $400mg{\cdot}L^{-1}$) were applied to the plants by a foliar spray or drenching. In 'Kumoma', application of $40mg{\cdot}L^{-1}$ paclobutrazol by a foliar spray or drenching reduced plant height by 12.5 and 12.6 cm, and flower length by 3.4 and 3.3 cm, respectively. On the other hand, in 'Kumoma-Gusa', drenching of paclobutrazol reduced plant height by 10.7 to 12.6 cm and flower length by 2.0 to 3.9 cm with increasing concentration, but the number of florets almost fell to 20 as compared to 40.5 in the control. 'Kumoma-Gusa' plants drenched with $80mg{\cdot}L^{-1}$ paclobutrazol and sprayed with $40mg{\cdot}L^{-1}$ flurprimidol had the shortest heights of 10.7 and 9.9 cm, and floral length of 2.0 and 1.5 cm, respectively. A flurprimidol drenching at $40mg{\cdot}L^{-1}$ delayed the harvest by 3-13 days as compared to the control and the smallest number of florets, 15.6, was observed in this treatment. In both cultivars, chlormequat and daminozide did not effectively influence the growth and flowering. However, number of florets increased to more than 41 at all concentrations and up to 63, the greatest floret number, with chlormequat drench in 'Kumoma-Gusa'. These results demonstrated that over $40mg{\cdot}L^{-1}$ of paclobutrazol or 5 to $20mg{\cdot}L^{-1}$ of flurprimidol could be used as PGRs to control the growth of floral length and flowering for improving potted plant quality in S. rosacea 'Kumoma' and 'Kumoma-Gusa'.

• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.517-521
• /
• 2013

A new cultivar Dendranthema grandiflourm 'Dream Round' was developed at Gyeonggi-do Agricultural Research & Extension Services (GARES), Korea in 2010. The variety 'Dream Round' was initially derived from a cross in 2006 between 'Hebo' a seed parent, a spray chrysanthemum cultivar with white anemone type, and 'Samos' as a pollen parent, a spray chrysanthemum variety with white anemone type. The cultivar has anemone type with white petals. Trial evaluation was conducted from 2008 to 2010 for the selection of that cultivar, including a shading culture in spring and a retarding culture in summer. The flowering time of 'Dream Round' was October 24th, and year-round flowering was possible by shading or lighting treatment. The diameter of flower of 'Dream Round' was 34.1 mm. Numbers of flowers per stem and petals per flower of 'Dream Round' were 12.8 and 26.1, respectively. Its leaf color was green (Green Group 147A) and plant height was 92.4 cm. Days to flowering of 'Dream Round' under the short day treatment was about 54 in spring, and diameter of flower of 'Dream Round' was 34.2 mm in the summer. The vase life of 'Dream Round' was 21.7 days in autumn.

• Korean Journal of Organic Agriculture
• /
• v.8 no.1
• /
• pp.89-99
• /
• 1999

To do mass multiplication of plug seedlings in potatoes, apical stem cuttings originated from virus-free microtubers were cut to one-two internodes and transplanted into the plug-tray. After 10days, we applied Chitosan and Wood Extraction on rooting and tuber formation of plug seedlings. To improve field adaptability of plug seedlings, rooted cuttings with a height of 20cm after 20days of cutting were transplanted ito the fields, We applied 500~2000ppm Chitosan on growth characteristics and tuber formation of that. The above and underground growths, such as plant height and number of leaves were significantly more vigorous after treatment with 500~1,000ppm Chitosan and 2,000ppm Wood Extraction, the spray treatment was carried out five times at intervals of four days after ten days of transplanting. T-N, K, P, Mg and Na, were higher as the concentrations of chitosan and Wood Extraction were higher. The growth and tuber yield in plug seedlings planting plot and seed potatoes planting plot were effectively highter as foliar application of Chitosan(500~2,000ppm) was done after planting the plot. T-N content in leaves and tuber was higher as the concentration of Chitosan was high. A similar tendency was shown in K, P and Mg. In the small tuber(under 30g), the number of tubers and tuber yield were relatively increased in the seed potatoes planting plot, but the large tubers(over 80g) yield was higher in the plug seedlings planting plot, and in order to increase tuber yield in plug seedlings it was necessary to add plant density to the field.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.69-75
• /
• 2014

Recently Amore pacific rack-type warehouse fire broke out and argue an urgent improvement of fire protection design code including automatic sprinkler and detection design. Various type of commodities have their unique fire characteristics from fire spread rate and heat lease rate and fire hazard depends on storage height, rack arrangement, aisle width, fire load etc. With increasing ceiling height for more storage space prevent effective water spray of sprinkler head, also delays detection time causes failure of early suppression. To achieve fire protection code performance of this occupancy, Major code articles relating to a classification of commodity, sprinkler system installation, detection and fire fighting are reviewed and suggested based on fire case analysis, code review between country and field survey.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.9-16
• /
• 2013

The comparisons of performance characteristics between the super-mirror face grinding machine using variable air pressure developed in this laboratory to grind precisely the sliding face of a surface hardened workpiece with thermal spray and the conventional one are investigated by measuring the surface roughness and hardness for a SCM440. To process variously workpiece according to shape, size and materials, the rotating and contacting forces of the developed grinding machine can be changed by air pressure. The surface roughness of processed workpiece can be also attained to state of mirror face by grinding precisely the sliding face with changing the rotating speed of diamond wheel. It is possible to be attached to the various machine tools because the super-mirror face grinding machine using variable air pressure is a small size. The grinding efficiency is elevated because it can be worked by two or more grinding machines attached to concurrently a machine tool for the large workpiece. In this study, results show that the cusp height of the super-mirror face grinding machine for the particle size of 100 and $1500No./mm^2$ is lower than that of the conventional one because the vibration is reduced by rotating very fast the diamond wheel with a pressed air and it can be processed by rotating the diamond wheel with a constantly varied air pressure perpendicular to workpiece surface, and that the workpiece in the super-mirror face grinding machine for the particle size of $3000No./mm^2$ can be processed to state of mirror face that is rarely seen by the cusp height. It is also found that the surface hardness of both the conventional and the super-mirror face grinding machines are increased as the particle size of diamond wheel is reduced, and the surface hardness of the super-mirror face grinding machine is HRC 1.1 ~ 1.8 higher than that of the conventional one.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.1
• /
• pp.54-59
• /
• 2012

This study presents investigation on ullage effect in sloshing experiment. The experiment was done with two dimensional tank. Sloshing experiments were carried out in the tank with 6 different ullage pressures. The tested filling ratio was 30% of the tank height. The flow field was recorded with high speed camera. The sloshing impact pressure were measured at 18 locations. It was shown that the variation of ullage pressures influences the magnitude of pressure and flow field. This study demonstrated the importance of ullage pressure in sloshing test.

• Journal of ILASS-Korea
• /
• v.11 no.2
• /
• pp.89-97
• /
• 2006

An inviscid axisymmetric model capable of predicting droplet bouncing and the detailed pre-impact motion, influenced by the ambient pressure, has been developed using boundary element method (BEM). Because most droplet impact simulations of previous studies assumed that a droplet was already in contact with the impacting substrate at the simulation start, the previous simulations could not accurately describe the effect of the gas compressed between a failing droplet and the impacting substrate. To properly account for the surrounding gas effect, an effect is made to release a droplet from a certain height. High gas pressures are computationally observed in the region between the droplet and the impact surface at instances just prior to impact. The current simulation shows that the droplet retains its spherical shape when the surface tension energy is dominant over the dissipative energy. When increasing the Weber number, the droplet surface structure is highly deformed due to the appearance of the capillary waves and, consequently, a pyramidal surface structure is formed; this phenomenon was verified with our experiment. Parametric studies using our model include the pre-impact behavior which varies as a function of the Weber number and the surrounding gas pressure.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.289-296
• /
• 2020

In this paper, the effects of the spontaneous combustion inhibitor on the surface of the coal stockpile in the coal yard was investigated by numerical analysis. First, the numerical analysis method of the present study was compared with the results of the previous study by analyzing the case in which the spontaneous combustion inhibitor was not applied, while the effects of spraying the spontaneous combustion inhibitor for the prevention of spontaneous combustion onto various areas and positions was also analyzed. As a result, the larger the application area of the spontaneous combustion inhibitor, then the more effective it is for preventing spontaneous combustion as it blocks the oxygen inflow into the coal stockpile, while, when spraying the spontaneous combustion inhibitor from the bottom of the coal stockpile, then the greater the effect it has on the prevention of spontaneous combustion. In conclusion, it was most effective to spray the spontaneous combustion inhibitor from the bottom of the coal stockpile up to about 30% of the height of the coal stockpile, when considering the economic aspect.

• Journal of agriculture & life science
• /
• v.43 no.5
• /
• pp.43-46
• /
• 2009

The one of problems of plug seedlings production in winter season was a poor growth. This study was carried out to investigate the effects of treatments with yeast fertilizers on the growth of pepper seedlings in winter seasons. The plant height, internode length, and shoot and dry weight of pepper seedlings increased significantly by yeast fertilizers. The results showed that yeast fertilizer treatment could be more effective in soaking than foliar spray and that of dilution could be effective in $1,000{\times}$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.4
• /
• pp.441-449
• /
• 1996

This study was conducted to find the changes of growth, seed yield and several characteristics of sesame by leaf spray of boron as a solution which is likely to be lack in the soil. It is carried out at low land developed 5 years ago. The amount of 200l /l0a boron as boric acid is sprayed in each treatment at the 11 node stage of sesame in main stem. The spraying concentrations of boric acid are 0.0, 0.2 and 0.4% in each treatment of the level low plot and the ridge height 15cm plot. The result shows that leaf area is increased in proportion to the concentration of boric acid in each treatment of the level low and the ridge height 15cm, and the degree of increase of each node order is remarkable in lower leaves and is more remarkable in the treatment of level low plot. The effects of leaf spray of boric acid are not only the increase of leaf area but also dry weight, no. of capsule per plant, 1,000 grains weight of capsule setting under middle position. As a result, the amount of seed is increased in 53% in the treatment of level low. The change of major characteristics according to leaf spray of boric acid is generally great in the treatment of level low. Especially the increase of leaf area in the part of upper leaves and low leaves is effective to improve other characteristics.