• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.84-90
• /
• 2015

The physicochemical properties and protease activities of spray-dried pineapple juice powders were investigated. The pH, soluble solids, and protease activity of the pineapple juice were pH 5.43, $12.8^{\circ}Brix$, and 4.82 unit/mL, respectively. The optimum pH and temperature of the protease activity from pineapple juice were pH 7.0 and $50^{\circ}C$, respectively. The microencapsulation of pineapple juice was achieved using maltodextrin and alginic acid through spray-drying. The L value and moisture content of the spray-dried powder were higher than those of the freeze-dried powder. The particle size of the freeze-dried powder ($501.57{\mu}m$) was higher than that of the spray-dried powder ($42.58-53.32{\mu}m$). The water absorption and water solubility of the powders were 0.41-0.87, and 90.45-99.76%, respectively. When compared, the protease activities were found to be in the following order : FD (1,297.47 unit/g) > SD-MA-1 (692.08 unit/g) > SD-MA-2 (664.66 unit/g) > SD-MA-3 (642.65 unit/g) > SD-M (633.51 unit/g). In the in vitro dissolution study measurements were conducted for 4 hr in pH 1.2 simulated gastric fluid and pH 6.8 simulated intestinal fluid, using a dissolution tester at $37^{\circ}C$ in 50 rpm. The protease survival of the 3.74-15.69% microencapsulated pineapple juice powders improved with an increase in the treatment concentration of alginic acid.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.657-661
• /
• 2009

Liquid microparticulated seaweed calcium was manufactured via a wet grinding process. Thereafter, different forming agents such as cyclodextrin, gum arabic, and Na-caseinate were added to the liquid calcium, which was then spray-dried to investigate the quality of the powdered calcium treatments. The moisture contents of samples were approximately 2%. It was also determined that the different kinds of forming agents did not affect the spray drying efficiency. In addition, calcium solubility was the highest in a solution of pH 2. In buffer solution and vinegar, the powdered calcium made with gum arabic showed the highest solubility among the treatments. The calcium contents of all the powdered microparticulate seaweed calcium samples were about 28%, and calcium content was not affected by the forming agents. The spray-dried calcium powder made by spray drying with gum arabic had the highest water vapor uptake, whereas the seaweed calcium was stable in terms of water adsorption. The results of SEM observations indicated that a portion of the spray-dried calcium powders were in nano-scale after wet-grinding. Among the treatments, the use of saccharides as a forming agent resulted in the most uniform particle distribution after spray-drying.

• Journal of Dairy Science and Biotechnology
• /
• v.40 no.3
• /
• pp.134-142
• /
• 2022

Protein-enriched dairy powder is widely consumed to promote muscle synthesis. Recently, in Korea, elderly people have also begun consuming protein powder products to prevent muscle loss. However, these protein-enriched powders have poor flowability and hydration properties because of the fine particles of spray-dried milk protein powder. Therefore, in this study, the fluidized bed agglomeration process was used to solve these problems. The rheological and physical properties of milk protein isolate (MPI)/skim milk powder (SMP) mixtures were effectively improved via fluidized bed agglomeration. The particle size of the MPI/SMP mixtures significantly increased from 35.7-58 ㎛ to 118-136 ㎛, the flowability level improved from fair (21.4-26.3) to good (15.7-16.3), and the cohesiveness level changed from intermediate (1.27-1.36) to low (1.18-1.19) after fluidized bed agglomeration. In addition, the wetting time of the agglomerated MPI/SMP mixtures was effectively reduced to 4.67-58.3 s by fluidized bed agglomeration. These findings may be useful for manufacturing protein-enriched dairy powders with good instant properties.

• Korean Journal of Food Science and Technology
• /
• v.38 no.4
• /
• pp.513-520
• /
• 2006

Spray-dried (SD) and freeze-dried (FD) takju powders were stored at 5, 15 and $25^{\circ}C$, and various quality characteristics such as moisture, amino nitrogen, color value, total viable cell count, total sugar, reducing sugar organic acid, and flavor compounds were measured for 50 days at 10-day intervals. After 50 days of storage, the moisture content was increased from an initial 6.64% to 7.24-7.38% in the SD powder, and from an initial 4.86 to 5.43-5.61% in the FD powder. pH, total acid content and total viable cell counts were slightly increased. Organic acid content was decreased in the SD powder from an initial 3,949.9 mg% to 805.9-922.3 mg%, and in the FD powder from an initial 5,171.5 mg% to 3,646.0-4,110.2 mg%. Amino nitrogen content was increased in the SD powder from an initial 1.2% to 1.9-2.2% and in the FD powder from an initial 1.9% to 2.2-2.5%. Total sugar and reducing sugar contents were increased in the SD powder from an initial 17.2% and 4.0% to 25.9-27.3% and 5.8-6.9%, and in the FD powder from an initial 19.1% and 5.2% to 29.2-30.2% and 8.3-8.8%, respectively. With increasing storage time, L and b values in the SD powder increased slowly, while L value in the FD powder tended to decrease and b value tended to increase. About 20 major volatile flavor components were identified in the SD and FD powders by GC-MS and all such component levels were decreased with increasing storage time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.11
• /
• pp.1615-1622
• /
• 2014

An accurate assessment of moisture content in feed ingredients is important because moisture influences the nutritional evaluation of feedstuffs. The objective of this study was to evaluate various methods for moisture content determination. In Exp. 1, the weight loss on drying (LOD) of corn, soybean meal (SBM), distillers dried grains with solubles (DDGS), whey permeate, whey powder, spray-dried porcine plasma (SDPP), fish meal, and a mixed diet of these 7 ingredients were measured by oven drying at $135^{\circ}C$ for 2 h. Additionally, the samples were dried at $105^{\circ}C$ for 3, 6, 9, 12, or 15 h. The LOD contents of the DDGS, whey permeate, and whey powder measured by drying at $135^{\circ}C$ for 2 h were greater than the values measured by drying at $105^{\circ}C$ for 3 h (p<0.05). All samples except SDPP (p = 0.70) dried at $105^{\circ}C$ for 6, 9, 12, or 15 h caused more LOD compared with the samples dried for at $105^{\circ}C$ for 3 h (p<0.05). The LOD contents of the individual ingredients were additive when dried at $105^{\circ}C$ regardless of drying time. In Exp. 2, moisture contents of corn, SBM, wheat, whey permeate, whey powder, lactose, and 2 sources of DDGS (DDGS1 and DDGS2) were measured by the Karl Fischer method, oven drying at $135^{\circ}C$ for 2 h, and oven drying at $125^{\circ}C$, $115^{\circ}C$, $105^{\circ}C$, or $95^{\circ}C$ for increasing drying time from 1 to 24 h. Drying samples at $135^{\circ}C$ for 2 h resulted in higher moisture content in whey permeate (7.5% vs 3.0%), whey powder (7.7% vs 3.8%), DDGS1 (11.4% vs 7.5%), and DDGS2 (13.1% vs 8.8%) compared with the Karl Fischer method (p<0.05). Whey permeate and whey powder were considerably darkened as the drying time increased. In conclusion, drying samples at $135^{\circ}C$ for 2 h is not appropriate for determining the moisture content in whey permeate, whey powder, or DDGS as well as the mixed diet containing these ingredients. The oven-drying method at $105^{\circ}C$ for 5 to 6 h appears to be appropriate for whey permeate and whey powder, and at $105^{\circ}C$ for 2 to 3 h for DDGS.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.113-119
• /
• 1995

The green body was fabricated by a new forming method, pressureless powder packaing forming method, and the characteristics of sintered specimen were investigated. It was found that alumina ceramics prepared by the present method showed porous structure with narrow pore size distribution, and in case of abrasive powder sintered body, compared with dry-pressed specimen, had the nearly same density. Especially, the specimen prepared with spray-dried granules showed the characteristic that granules were not either deformed or fractured during forming and sintering process. Therefore, it was found that this new forming method was effective method in fabrication of porous ceramics on account of easy control of porosity and pore size and its high thermal stability.

• Journal of Sericultural and Entomological Science
• /
• v.40 no.2
• /
• pp.143-149
• /
• 1998

For the application of silk sericin, silk sericin powders were prepared by various spray dry conditions and the characteristics of silk sericin/polyurethane mixed films were investigated. When the sericin was dried from the solution at higher inlet and outlet temperature, larger sizes of the powder particles were obtained. It was also found that inlet and outlet temperatures were important factors affecting the shape and surface characteristics of sericin power particle. The many holes and empty spaces were observed at the surface and cross section of sericin/PU mixed film. With the increase of the amount of sericin powder in the mixed films, the size and number of holes and empty spaces were increased. The thickness of sericin/PU mixed film was increased with the content of sericin powder. As the portion of sericin powder increase, the tenacity is decreased while the elongation slightly increased.

• Journal of the Korean Chemical Society
• /
• v.21 no.2
• /
• pp.125-131
• /
• 1977

Soymilk prepared from soaked beans under processing conditions indicating in table 2, mixed with vegetable oil, carbohydrate, whey powder, and sodium-caseinate, and fortified with essential amino acids, vitamins and minerals and then made the imitation milk by spray drying. The Feed Efficiency Ratio (FER) and Over-All Nutritive value of spray dried imitation milk were tested with weanling Albino Rats and by chemical analysis methods. The FER of imitation milk M-2, and humanized milk, were respectively 0.24, 0.25 and that of cow's milk, imitation milk M-1 were 0.21, 0.20, compared with 0.24 for imitation milk M-2. The amino acid and fatty acid composition in imitation milk were analyzed by Gaschromatography and Amino Acid Autoanalyzer. The present paper describes the result of studies on the Feed Efficiency Ratio and Over-All Lutritive value concerning amino acid and fatty acid composition in imitation milk. We found that quality of essential amino acids and polyunsaturate fatty acid composition in imitation milk have an strong effect on Feed Efficiency Ratio.

• Food Science of Animal Resources
• /
• v.42 no.5
• /
• pp.861-873
• /
• 2022

The drying of duck blood provides safety and commercial benefits, but each drying method has its own characteristics. Moreover, information on the effects of diverse drying methods on the quality of duck blood is limited. This study aimed to investigate the effects of various drying methods on the chemical and functional properties of duck blood. The physicochemical characteristics and functional properties of duck blood subjected to spray drying (SD), freeze drying (FD), vacuum drying (VD), and hot air drying (HD) were examined. The carbonyl content of FD duck blood powder was the lowest and the thermal stability was higher than that of the other treatments (p<0.05). The gel obtained from spray-dried blood displayed the lowest malondialdehyde content. The hardness, gumminess, and chewiness were the highest in the heat-induced gel prepared from FD duck blood powder (p<0.05). The gel obtained from FD duck blood displayed a denser structure than the other gel samples. Taken together, the FD duck blood exhibited excellent chemical properties and processing suitability.

• Korean Journal of Food Science and Technology
• /
• v.48 no.1
• /
• pp.42-47
• /
• 2016

The purpose of this study was to evaluate the quality characteristics in different types of Omija (Schizandra chinensis Baillon) powder tea. Raw Omija was prepared in three ways: 1) freeze-dried powder of whole Omija (FD), 2) freeze-dried powder of pressed Omija juice (PF), and 3) granules of pressed Omija juice (PG). Dried Omija was extracted and prepared in three ways: 4) freeze-dried powder (EF), 5) granules (EG), and 6) spray-dried powder (ES). The total soluble solid contents and turbidity were higher in PG, EG, and ES than those in other samples. $L^*$ value, pH, and reducing sugar contents were higher in PG and EG than those in other samples. Finally, $a^*$ value, $b^*$ value, total phenolic compounds contents, antioxidant activities, total anthocyanin contents, and schizandrin contents were lower in PG and EG than those in other samples. These results show that FD, PF, EF, and ES are more effective in outstanding redness and antioxidant activities compared to other Omija powder products.