• 한국항공우주학회지
• /
• 제31권8호
• /
• pp.69-76
• /
• 2003

액체로켓 연소기 내의 막냉각 특성 분석을 위한 비회체 분무연소에 대한 수치해석을 수행하였다. 막냉각 연료의 특성에 따른 연소기 벽면의 온도변화를 살펴보기 위하여 막냉각용 연료의 유랑, 막냉각용 액적의 직경, 그리고 공기/연료 혼합비를 매개변수로 한 수치해석을 수행하여 연소기 벽면의 온도는 막냉각용 연료 액적 직경의 변화에는 큰 영향을 받지 않지만 막냉각용 연료 유량 및 공기/연료 혼합비에 영향을 받고 있음을 확인하였다. 또한, 추진기관 벽면으로 전달되는 전도 및 복사열유속을 고찰함으로서 이러한 액체 추진기관의 연소특성을 이해하기 위해서는 열복사 및 물성치의 적절한 고찰이 필요함을 지적하였다.

• 한국분무공학회지
• /
• 제17권2호
• /
• pp.64-70
• /
• 2012

Water mist fire suppression systems which use relatively small droplets of water with high injection pressure are increasingly being used in wider applications because of its greater efficiency, low flooding damage and low toxicity. However, the performance of the system significantly relies on the water mist characteristics and it requires better understanding of fire suppression mechanism of water mist. In the present study, computational fluid dynamics simulations were carried out to investigate cooling performance of water mist in heated chamber. The gas phase was prepared with natural convection heat transfer model for incompressible ideal case and then the effects of water mist injection characteristics on cooling capabilities were investigated upon the basis of the pre-determined temperature field. For the simulation of water mist behavior, Lagrangian discrete phase model was employed by using a commercial code, FLUENT. Smaller droplet sizes, greater injection angles and higher flow rates provided relatively higher cooling performance.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1119-1122
• /
• 2009

The use of cooling towers in the air conditioning systems of buildings is increasing. In closed wet cooling towers, the heat transfer between the air and surface tubes can be composed of the sensible heat transfer and the latent heat transfer. The latent heat transfer is affected by the air and spray water. This study provides a designing methodology of heat exchanger for closed wet cooling tower. The correlation equation was derived to interpret the mass transfer coefficient based on the analogy of the heat and mass transfer and the experimental results. The results from this correlation equation showed fairly good agreement with experimental data.

• 한국화재소방학회논문지
• /
• 제33권6호
• /
• pp.1-8
• /
• 2019

본 연구에서는 물 분무 액적 특성 변화가 화재 진압에 미치는 영향을 FDS 6.5.2를 이용하여 수치적으로 분석하였다. 물 분무 노즐의 소화계수, 액적 분포함수, 중간체적 직경 및 초당 액적 수 변화에 대한 화재진압 특성은 정규 열방출률 곡선의 감소율와 냉각시간의 측면에서 평가되었다. 소화계수가 증가하면 정규열방출률 곡선이 더 급격하게 감소하고, 중간체적입경 변화가 화재진압에 영향을 미치는 것을 확인하였다. 단일 액적분포에서 초당액적수의 증가에 따라 정규 열방출률 곡선은 더 완만하게 감소하였으며, 다중분포에서는 초당액적수가 작은 조건에서만 정규 열방출률 곡선이 급격하게 감소하는 것을 확인하였다.

• 한국분무공학회지
• /
• 제20권2호
• /
• pp.95-100
• /
• 2015

Lower recirculated gas temperature at EGR system reduces NOx and PM emissions. However, EGR Cooler can be polluted by PM generated from recirculated EGR gas, and it reduces cooling efficiency and the amount of EGR gas simultaneously. The SECFR(Steam EGR Cooler Fouling Remover) system which uses the evaporated washer fluid steam caused by high temperature of EGR gas was manufactured for removing fouling generated on the cooler surface. Since an injection pressure of wind shield washer fluid in the vehicle is approximately 0.5 bar, it is not enough to atomize the injected washer fluid. Thus, it is necessary to apply a method to atomize the washer fluid. In this study, the impinging plate was used to promote the atomization of spray washer fluid for the purpose of apply SECFR system to vehicles and measured the DAR(Droplet Area Ratio) and DUI(Droplet Uniformity Index) through the spray visualization.

• 한국분무공학회지
• /
• 제6권4호
• /
• pp.14-21
• /
• 2001

Rotary atomizer is widely used in practical application ranging from combustion, cooling, spray drying, agriculture, chemical system. Rotary cup atomizer has some advantages such as extreme versatility and liquid atomization successfully varying widely in viscosity. In rotary atomization, the feed liquid is centrifugally accelerated to high velocity and the liquid extends over the rotating surface as a thin film before being discharged into an atmosphere. The degree of rotary atomization depends upon peripheral speed, feed rate, liquid properties and atomizer design. An important asset is that thickness and uniformity of the liquid sheet can readily be controlled by regulating the liquid flow rate and the rotational speed. LDPA(Laser Diffraction Particle Analyser) and image aquisition system are used to measure drop size distribution and spray pattern. The atomization characteristics of the rotary cup atomizer is investigated experimentally by varing the liquid feed rate, rotary cup speed and air velocity for atomization. As a results, the effect of air velocity on the atomization characteristics such as drop size and spray uniformity is considerably greater than variation of those with liquid feed rate.

• 한국산학기술학회논문지
• /
• 제6권2호
• /
• pp.110-115
• /
• 2005

표면 경화가 요구되는 소재에 코발트계 합금 분말을 용사 소모재로 하고 플라즈마 트랜스퍼드 아크(PTA) 용사 공정을 이용하여 표면 개질부를 제조하였다. 표면 개질부는 다른 용사 변수는 일정하게 유지한 상태에서 용사 전류만을 변화하여 제조하였다. 용사 전류를 80에서 140 amp까지 20 amp씩 증가하면서 개질층을 제조하였다. 두께가 일정한 모재에 전류를 변화하여 표면 개질층을 제조하는 경우 용사후 모재에서 발생하는 냉각 효과가 다르게 되고 이는 개질층의 폭과 두께 등의 기하학적 형상과 미세 조직, 그리고 미세경도 등의 특성에 영향을 미치는 것으로 나타났다. 용사 전류를 120amp로 사용한 경우 미세조직이 조밀하고 미세경도 값이 가장 높은 값을 나타내는 개질층을 얻을 수 있었다. 전류를 증가함에 따라 개질층의 폭은 증가하지만 높이는 큰 변화가 없는 것으로 나타났다.

• 대한화학회지
• /
• 제34권6호
• /
• pp.555-560
• /
• 1990

$YBa_2Cu_3O_{7-x}$ 초전도 필름을 초음파에 의한 aerosol spray 법을 이용하여 YSZ (yttria stabilized zirconia) 및 SrTi$O_3$의 (100) 결정면 위에 만들었다. 초전도상은 세 단계의 과정을 거쳐서 형성되었다 : (가) 이트륨, 바륨, 구리의 질산염을 화학 양론비로 섞어 만든 용액을 250$^{\circ}C$로 가열된 기질에 분무하여, (나) 형성된 필름을 공기 중에서 550$^{\circ}C$로 예열하고, (다) 흐르는 산소 분위기에서 950$^{\circ}C$로 소결한 뒤 노냉하였다. 필름의 저하을 dc four-point probe 법으로 측정하여 액체질소 온도 이상에서 초전도성을 확인하였다.

• 한국태양에너지학회 논문집
• /
• 제36권5호
• /
• pp.31-50
• /
• 2016

To develope a greenhouse fog cooling system to control the temperature and relative humidity simultaneously to the target value, a theoretical analysis and experiments were done. The control process includes the measuring of environmental variables, setting and coding of the water and heat balance equations to maintain the target temperature and relative humidity in greenhouse, calculating of the open level of the greenhouse roof window that governs the natural ventilation and spray water quantity, and operating of the motor to open/close the roof window and pump to spray for water. The study results were shown to be very good because the average air temperature in the greenhouse was kept to be about $28.2^{\circ}C$ with the standard deviation of about $0.37^{\circ}C$ compared to the target temperature of $28^{\circ}C$ and the average relative humidity was about 75.2% compared to the target relative humidity was 75% during the experiments. The average outside relative humidity was about 41.0% and the average outside temperature was $27.2^{\circ}C$ with the standard deviation of about $0.54^{\circ}C$. The average solar intensity in the greenhouse was 712.9 W. The wind velocity of outside greenhouse was 0.558 m/s with the standard deviation of 0.46 m/s.

• Journal of Animal Science and Technology
• /
• 제64권4호
• /
• pp.782-791
• /
• 2022

The purpose of this study is to evaluate the effects of multiple cooling systems and different drinking water temperatures (DWT) on the performance of sows and their hair cortisol levels during heat stress. In this study, the effect of four different cooling systems: air conditioner (AC), cooling pad (CP), snout cooling (SC), and mist spray (MS), and two DWT, namely low water temperature (LWT) and high water temperature (HWT) on 48 multiparous sows (Landrace × Yorkshire; 242.84 ± 2.89 kg) was tested. The experiment is based on the use of eight replicas during a 21-days test. Different behaviors were recorded under different cooling treatments in sows. As a result, behaviors such as drinking, standing, and position change were found to be lower in sows under the AC and CP treatments than in those under the SC and MS treatments. Lying behavior increased under the AC and CP systems as compared with that under the SC and MS, systems. The average daily feed intake (ADFI) in sows and weight at weaning in piglets was higher under the AC, CP, and LWT treatments than under the SC, MS and HWT treatments. Sows subjected to SC and MS treatment showed higher hair cortisol levels, rectal temperature, and respiratory rate during lactation than those under AC and CP treatments. Hair cortisol levels, rectal temperature, and respiratory rate were also higher under the HWT than under the LWT treatment. As per the results of this study, the LWT has no significant effect on any of the behavioral factors. Taken together, the use of AC and CP cooling treatment is highly recommended to improve the behavior and to reduce the stress levels in lactating sows.