• 농약과학회지
• /
• 제4권4호
• /
• pp.87-92
• /
• 2000

인축독성 및 잔효성이 낮은 환경친화적인 Petroleum spray oil(PSO; DC-Tron $Plus^{(R)}$)의 살포에 따른 귤응애에 대한 방제효과 및 약해발생에 관하여 포장조건하에서 검토하였다. PSO를 0.25%, 0.33%, 0.5% 및 1%를 처리한 결과, 귤응애에 대한 방제효과는 모든 농도에서 대조약제(tebufenpyrad, bifenazate, sun spray oil)와 비교하여 비슷하거나 뛰어났으며, 약효도 40일 이상 장기간 지속되는 경향을 나타냈다. 그런데 PSO 0.5% 이상 처리시에는 감귤잎에 유침상 증상이 일부 나타났으나 2개월후에 거의 사라졌으며, 낙엽율과 낙과율은 다소 증가하는 경향이었다. 그리고 PSO 1%를 감출 더뎅이병 및 검은점무늬병의 적용약제와 각각 혼용처리한 결과, 더뎅이병 방제약제인 Fluazinam 수화제와 혼용한 경우 일부 신초가 타거나 일부 신엽에 흑점이 발생하였다. 이러한 약효와 약해 결과를 고려해 볼 때 귤응애 방제를 위한 하절기 PSO 적정 살포농도는 0.25% 또는 0.33% 정도일 것으로 판단된다.

• 치위생과학회지
• /
• 제19권2호
• /
• pp.107-112
• /
• 2019

Background: Good oral health is important for systemic body health and quality of life. Spray oral cleansers are increasingly preferred because of their convenience of carrying and the ease of oral hygiene management. In addition, many kinds of oral cleanser products containing various ingredients with antibacterial, washing, and moisturizing effects are being manufactured. However, concerns about the safety and side effects of oral sprays are increasing, and there is very little information regarding the use and care of oral sprays is available to consumers. This study aimed to investigate the effects of oral spray on oral bacteria and tissue to elucidate the factors that need to be considered when using oral sprays. Methods: The effects of oral spray on the growth of dental plaque bacteria was assessed using disk diffusion assays. Cytotoxicity and morphological changes in oral epithelial cells were observed by microscopy. The effects of oral spray on dental plaque growth were also confirmed on specimens from permanent incisors of bovines by Coomassie staining. Results: The pH of spray products, such as Perioe Dental Cooling, Cool Sense, and Dentrix, were 3.65, 3.61, and 6.15, respectively. All tested spray products showed strong toxicity to dental plaque bacteria and oral epithelial cells. Compared with those on the control, dental plaque bacteria deposits on the enamel surface increased following the use of oral spray. Conclusion: Three types of oral spray, namely Perioe Dental Cooling, Cool Sense, and Dentrix, strongly inhibited the growth of dental plaque bacteria and oral epithelial cells. The oral spray ingredient enhanced dental plaque growth on the enamel surface. Users should be informed of precautions when using oral sprays and the need for oral hygiene after its use.

• 한국생산제조학회지
• /
• 제23권4호
• /
• pp.385-391
• /
• 2014

A control system for ultrasonic spray pyrolysis deposition was developed that can coat a large size glass panel with a transparent conductive oxide. It consists of several ultrasonic atomizer devices to cover a large area and a host computer for individually controlling the devices. The sub-controller in an ultrasonic atomizer device can adjust the flow rate of the atomized conductive oxide gas by setting the flow rate of the solution and regulating the level of the solution in the tank. To construct a feedback control loop for level regulation, a level sensor that utilized an infrared distance sensor and an electric circuit for adjusting the ultrasonic oscillator were developed. The host program was also developed, which can monitor and control the sub-controllers. A proportional-integral controller was developed for a simplified model, and its operation was verified through an experiment.

• The Plant Pathology Journal
• /
• 제18권2호
• /
• pp.68-73
• /
• 2002

The influence of fungicidal spray was assessed on powdery mildew epidemics caused by Erysiphe polygoni D.C. and on yield-attributing characters of mungbean [Vigna radiata (L.) Wilczek]. Mildew attack adversely affected the yield-attributing characters of mungbean and exhibited negative significant correlation with pod length (-0.57), pods/plant (-0.74), pod weight (-0.68), 100 seeds weight (-0.69), 100 seeds swell weight (-0.59), and seed germination (-0.71). These characters had direct or indirect effects on grain yield, which was also adversely affected due to mildew attack (-0.89). Powdery mildew was significantly retarded due to the single spray of carbendazim (0.05%) at 30-day-old crop, where the apparent rate of infection (r) was minimum at 0.0095/ unit/day and with low (11.44%) powdery mildew intensity. Other fungicides like tridemorph (0.075%) and penconazole (0.05%) were equally effective against the mildew disease where the disease intensity was less than 20% and the values of r were 0.0134 and 0.039/unit/day respectively, as compared with the control at 0.267/unit/day. Fungicide spray influenced the yield-attributing characters besides controlling the disease. Such effects were more pronounced in carbendazim (0.05%)-treated plots due to its phytotonic nature where pod length (7.59cm), pods/plant (29.75), pod weight (8.16 g), 100 grain weight (3.94 g), and swell weight of 100 seed (9.49 g) were maximum resulting to the highest yield (480 kg/ha) as compared with that of control (224 kg/ha). Spray of carbendazim also improved seed germination (74.5%). Spray of other fungicides like carbendazim with copper oxychloride in 1:1 ratio, tridemorph (0.075%), and penconazole (0.05%) was equally effective against powdery mildew of mungbean. These fungicides also exhibited positive effects on yield-attributing characters of the crop and finally increased yield. These systemic fungicides were more effective in controlling powdery mildew disease of V. radiata in the rainy season compared with wettable sulphur.

• 한국분말재료학회지
• /
• 제20권5호
• /
• pp.359-365
• /
• 2013

In this study, we fabricated $Nd_2Fe_{14}B$ hard magnetic powders with various sizes via spray drying combined with reduction-diffusion process. Spray drying is widely used to produce nearly spherical particles that are relatively homogeneous. Thus, the precursor particles were prepared by spray drying using the aqueous solution containing Nd salts, Fe salts and boric acid with the target stoichiometric composition of $Nd_2Fe_{14}B$. The mean particle sizes of the spray-dried powders are in the range from one to seven micrometer, which are adjusted by controlling the concentrations of precursor solutions. After debinding the as-prepared precursor particles, ball milling was also conducted to control the particle sizes of Nd-Fe-B oxide powders. The resulting particles with different sizes were subjected to subsequent treatments including hydrogen reduction, Ca reduction and washing for CaO removal. The size effect of Nd-Fe-B oxide particles on the formation of $Nd_2Fe_{14}B$ phase and magnetic properties was investigated.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.209-216
• /
• 1999

A self-travelling sprayer was developed to avoid the exposure of an operator to agricultural chemicals and exhaust gas, to improve safety and to increase working efficiency during the application and transport work in the greenhouses. This system consists of self-travelling system and the control system for application and safety device. The auto-spray car is equipped with a liquid chemical tank of 80l capacity. The travelling system adopted mechanical steering system which link mechanism of front wheel is guided by guide rollers. The sprayer travels along the guiding pipe which is set on the furrow in the greenhouses. The sprayer stops automatically applying and traveling when the liquid chemical tank becomes empty or when the sprayer reach the turning point. The spray booms swings in a vertical plane. The control system of safety devices controls the automatic stop of the sprayer when there is an obstacle on the traveling path, or when the battery becomes discharged. The auto-spray car traveled smoothly and steadily along the guide pipe during traveling straightly and turning on the ground.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.34-42
• /
• 2010

Agricultural automation has become more and more important by environmental change. The automation demands the highest technology due to the ever changing various conditions in agriculture system. In the paper, semi-autonomous pesticide spray robot system has been developed for rose farming in the glass house. The robot is in autonomous mode during pesticide spraying process driven on pipe rail. The robot is manually driven while moving from a rail to the next rail. The drive platform and autonomous operation control system are developed based on IT fusion technology. The pesticide spray system is also developed with nozzles and booms for precision mist spray system. Experimental data of nozzle test is also included.

• 한국재료학회지
• /
• 제11권9호
• /
• pp.763-768
• /
• 2001

Molybdenum-based thermal spray powder is widely used for coating the moving parts of the internal combustion engines due to its excellent wear resistance. A composite powder of the $Mo_{40}(Al_{1-x}Si_x)_{60}$ system was synthesized using the SHS method. The synthesized bulk was pulverized and specially treated to produce thermal spray powder. It was found that the synthesis reaction consisted of two-steps: the formation of $Al_8/Mo_3$ and the formation of Mo(Al,Si)$_2$. Both the temperature and the rate of the SHS reaction linearly increased with the increase of the value of x in $Mo_{40}(Al_{1-x}Si_x)_{60}$, The temperature and the rate of the reaction were also affected by the compacting density of the specimens, exhibiting the maximum valves at 62% and 60%, respectively. Since spherical shape is advantageous to the thermal spraying process, shape-control of the powder was attempted with PVA as a binding additive, resulting in the successful production of almost perfectly spherical powder of 80 $\mu\textrm{m}$ Ø$(d_{50})$ mean particle size.

• 한국전기전자재료학회논문지
• /
• 제31권1호
• /
• pp.55-60
• /
• 2018

Transparent conductive thin films (TCFs) are essential materials for solar cells, organic light-emitting diodes, and display panels. Indium tin oxide (ITO) is one of the most widely used commercial materials to create TCFs'; however, new materials that can possibly replace ITO at a lower cost and/or those possessing mechanical flexibility are urgently needed. Silver nanowire (AgNW) is one of those promising materials, as it is less expensive and possesses superior mechanical flexibility as compared to ITO. We used AgNW and sol-gel ZnO to fabricate composite thin films by spray coating. We propose two spray-coating methods: the 'metal-organic chemical vapor deposition (MOCVD)/AgNW' method and the Mixture method. These two methods are expected to be commercialized for high-quality and low-cost products, respectively.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.89-95
• /
• 2001

Recently GDI(Gasoline Direct Injection) engine is spotlighted to achieve higher thermal efficiency under partial loads and better performance at full loads. To realize this system, it is essential to make both stratified combustion and homogeneous combustion. When compared to PFI(Port Fuel Injection) engine, GDI engine needs more complicated control and optimal design with injection system. In addition, spray pattern must be optimized according to injection timing because ambient pressure in combustion chamber is also varied. Thus spray structure should be analyzed in details to meet various conditions. In this experimental study, two types of visualization system were developed to simulate compression stroke and intake stroke, respectively. With an increase of the ambient pressure, the penetration length tends to decrease due to rising resistance caused by the drag force of the ambient air. Spray characteristics impinged on the piston has a significant effect on mixture stratification around the spark plug. These results provide the information on macroscopic spray structure and design factors far developing GDI injector.