• Asian-Australasian Journal of Animal Sciences
• /
• 제33권3호
• /
• pp.456-464
• /
• 2020

Objective: The aim of this study is to investigate the effect of oral spray with probiotics on the intestinal development and microflora colonization of hatched ducklings. Methods: In Exp. 1, an one-way factorial design was used to study the antibacterial activity of the probiotics and metabolites on Escherichia coli (E. coli) without antimicrobial resistance. There were four experimental groups including saline as control and Lactobacillus, Bacillus subtilis, combined Lactobacillus and Bacillus subtilis groups. In Exp. 2, 64-day-old ducklings were allotted to 2 treatments with 4 replicated pens. Birds in the control group were fed a basal diet supplemented with Lactobacillus fermentation in the feed whereas birds in the oral spray group were fed the basal diet and administrated Lactobacillus fermentation by oral spray way during the first week. Results: In Exp. 1, the antibacterial activities of probiotics and metabolites on E. coli were determined by the diameter of inhibition zone in order: Lactobacillus>combined Lactobacillus and Bacillus subtilis>Bacillus subtilis. Additionally, compared to E. coli without resistance, E. coli with resistance showed a smaller diameter of inhibition zones. In Exp. 2, compared to control feeding group, oral spray group increased (p<0.05) the final body weight at d 21 and average daily gain for d 1-21 and the absolute weight of the jejunum, ileum and total intestine tract as well as cecum Lactobacillus amount at d 21. Conclusion: Lactobacillus exhibited a lower antibacterial activity on E. coli with resistance than E. coli without resistance. Oral spray with Lactobacillus fermentation during the first week of could improve the intestinal development, morphological structure, and microbial balance to promote growth performance of ducklings from hatch to 21 d of age.

• 식물병연구
• /
• 제14권1호
• /
• pp.37-42
• /
• 2008

차나무 엽권에서 분리한 길항세균 Bacillus subtilis BD0310 균주를 차나무 겹둥근무의병을 일으키는 Pestalotiopsis longiseta에 대한 미생물제제로 개발하고. 대량배양 후 액상수화제로 제제화한 미생물제제의 차나무 겹둥근무의병에 대한 방제효과를 온실과 포장에서 검증하였다. 온실실험 결과 병원균을 접종한 2일 후에 차나무 잎에 미생물제제를 처리한 치료효과에 비해 병원균을 접종하기 2일전에 차나무 잎에 미생물제제를 처리한 예방효과가 훨씬 높았다. 2005년과 2006년 수행한 포장실험 결과 미생물 제제의 살포횟수에 따라 차나무 겹둥근무늬병에 대한 방제효과는 증가하였는데, 미생물제제만 1주일 간격으로 4회 및 6회 살포한 경우 52.4%와 66.7%의 방제효과를 얻은 반면에, 미생물제제와 화학약제를 1주일 간격으로 2회씩 교호살포한 경우와 화학약제만 4회 살포한 경우에는 71.4%와 85.7%의 방제효과를 얻었다. 따라서 미생물제제와 화학약제를 단독으로 살포하는 것에 비해 교호살포하면 화학약제의 사용을 절감하고 전체 살포휫수를 경감하면서 차나무 겹둥근무늬병에 대한 방제효과를 높일 수 있었다.

• 한국식물병리학회지
• /
• 제11권1호
• /
• pp.17-29
• /
• 1995

This study was conducted from 1991 to 1993 to develop a fungicidal spray program for the apples exportable to the United States of America, in which quarantine and pesticide residue in agricultural products are strictly regulated. In 1991, 2 spray schedules were applied to an orchard, in one of which the 7 fungicides registered for apple both in Korea and U.S. were used, and in the other of which the Bordeaux mixture for which the tolerance was exempted in U.S. was used 2 times along with those 7 fungicides. The apple white rot and fruit infection by Alternaria mali were not effectively controlled by the 7 fungicides alone; however, the control efficacy was raised by adding the Bordeaux mixture to the spray schedule. In 1992, 4 spray schedules were applied in which the kinds of fungicides and spray intervals were different one another. The results suggested that an effective spray program can be developed by adopting the Bordeaux mixture for 3 times or adopting the imminoctadine-triacetate which has not tolerance level in U.S. for same times in the vulnerable stage of apple white rot and alternaria blotch. In spite of the high efficacies against major apple diseases, the Bordeaux mixture could not be recommended to the apple growers due to the various defects such as restrictions in compatibility with insecticides and acaricides, troublesomeness in preparation and spray, especially the harmful effect on the finish of Fuji apples. In 1993, a spray program adopting 3 times of imminoctadine-triacetate during the growing season of apple was developed, which not only can effectively control the major apple diseases but also avoid the pesticide residue problems if it was sprayed 2 or 3 times after bagging. On the basis of the 3 years results, a basic fungicide spray program was formulated in which 1~3 times of imminoctadine-triacetate and 1~2 times of bitertanol were adopted in addition of the 7 common fungicides registered in both countries. In the results of application of the spray schedule to the actual farming in the 4 areas of Kyungpook Province in 1994, no noticeable defects were detected at the first year trial. However, this spray program will be continuously evaluated and modified to obtain better control efficacies against major apple diseases.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.239-245
• /
• 2004

It has been recognized that alternative fuels such as Liquid Petroleum Gas (LPG) show less polluting combustion characteristics than diesel fuel. Furthermore, engine performance is expected to be nearly equal to that of the diesel engine if direct-injection stratified-charge combustion of the LPG can be adopted in the spark-ignition engine. However, spray characteristics of LPG are quite different from those of diesel fuel. understanding the spray characteristics of LPG and evaporating processes are very important for developing efficient and low emission LPG engines optimized in fuel injection control and combustion processes. In this study, the LPG spray characteristics and evaporating processes were investigated using the Schlieren and Mie scattering optical system and single-hole injectors in a constant volume chamber. The results show that the mixture moves along the impingement wall that reproduced the piston bowl and reaches in ignition spark plug. LPG spray receives more influence of ambient pressure and temperature significantly than that of n-dodecane spray.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.42-44
• /
• 2003

The paper presents the method and apparatus for conformal photoresist spray coating on the 3D structured substrate. The system consists of a high-temperature-rotational chuck, ultrasonic spray nozzle module, angle control module and nozzle moving module. The coating uniformity is acquired by controlling the moving speed of the ultrasonic spray nozzle across the substrate which is rotated constantly. To coat the photoresist conformally the spray angle of the nozzle and the temperature of the substrate are controlled during spray coating. The rotational chuck can be heated up by hot air or $N_2$. The photoresist (AZ1512) has been coated on the 3D structured wafer by spray coating system and the characteristics have been evaluated.

• 한국분무공학회지
• /
• 제15권2호
• /
• pp.53-60
• /
• 2010

This study presents development of digital particle holographic system and its application to spray field to measure three-dimensional velocities and sizes of spray droplets. A double exposure hologram recording system with synchronization system for time control was established and digital holograms can be recorded in a short time interval. To process recorded holograms, the correlation coefficient method was used for focal plane determination of particles. To remove noises and improve the quality of holograms and reconstructed images, the Wiener filter was adopted. The two-threshold and image segmentation methods were used in binary image transformation. For particle pairing, the match probability method was adopted. The developed system was applied to spray field and three-dimensional velocities and sizes of spray droplets were measured. The measurement results of digital holographic system were compared with those made by laser instruments, PDPA(Phase Doppler Particle Analyzer), which proved the feasibility of in-line digital particle holographic system as a good measurement tool for spray droplets.

• 한국건설관리학회논문집
• /
• 제5권4호
• /
• pp.139-146
• /
• 2004

Resent removal work for road signs has been labor intensive and required times since it has been done manually using shaving type equipment. While traditional process is conducting, there are traffic jams caused by the passing control, and happened unexpected accidents to workers working at dangerous road circumstance. Besides, in current shaving method, there are high potentialities on the air pollution as well as the explosive accident occurred by using a propane gas. So, as an alternative, we have studied to develop the automatic erasing equipment made up with a high pressure water-jet system and automatic control system, mobile system; Wate-rjet system consists of an intensifier and nozzles to give a high pressure and spray on the sign, and automatic control system is composed of one axis robot using a hydraulic servo actuator controlled by a lever, And as a mobile system, a truck plays an important role for the transport of equipment and the forward movement in a removal process. In this paper, we have analyzed the characteristics of road signs and have investigated current erasing methods in the field. And we have organized and designed automatic erasing equipment, and we have made a basic experiment to find out the optimal spray condition as like the spray distance, spray angle and injection pressure.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.398-407
• /
• 2013

Optical tomography was used to measure the pattern of spray cross-section. The maximum-likelihood estimation (MLE) algorithm was used to reconstruct the spray cross-section from the measured transmission rate of the spray. A swirl-type injector was used to form an optically dense spray, and the test was carried out in a high-pressure chamber, to control the pressure condition of the test site. Before the experiment, the reliability of the MLE-based reconstruction algorithm was verified, by comparing it with a conventional filtered back projection reconstruction (FBP) method. The MLE algorithm showed superior reconstruction of the image. In the spray patternation experiment, the results of the optical tomography and optical line patternator, which uses Mie scattering signal information, were compared. While measuring the cross-section of optically dense spray, the intensity of the scattering signal had attenuated to an uncorrectable level, which led to incorrect spray pattern measurement by the optical line patternator. However, reliable results were obtained by optical tomography, under the same condition. Finally, the pattern of the optically dense spray was measured at various chamber pressures, of up to 3 MPa. As the chamber pressure increased, the hollow cone-shaped swirl spray shrank, and the attenuation coefficient value of the inner region increased.

• Journal of Biosystems Engineering
• /
• 제25권1호
• /
• pp.11-18
• /
• 2000

In precision chemical application increment of biological efficacy with less chemical is the virtue. spraying rate and droplet size is closely related to biological efficacy. this study was performed to develope a spray-control-system that could control spraying rate and droplet size independently. Twin-fluid nozzles were selected and tested to certify if the nozzles were suitable for the objective of this study. Characteritics of the nozzles i.e., spraying rte and droplet size change u8nder the changes of spraying pressure and air pressure were statistically modeled. The model had I to 1 matching property between dependent variables and independent variables. Using the property and the model, inverse relationship could be determined between variables. A feedback spray control system was developed and tested with predetermined error of 5 % in pressure. The system showed 4 % error in spraying rate and 9 % error in droplets size. Performance of the system could be upgraded by fine tuning but, in practical sense keeping air pressure in the field sprayer was the bottle neck of commercialization of the spray system.

• 대한기계학회논문집B
• /
• 제34권11호
• /
• pp.1005-1013
• /
• 2010

본 연구는 HCCI 엔진의 운전조건을 고려한 혼합연료의 감압비등 분무제어방법을 평가하기 위하여 수행하였다. 2상영역이 존재하는 혼합연료는 고비점성분의 증발촉진과 함께 연료분무의 급격한 증발을 유도할 수 있는 감압비등분무를 이용함으로써 저온 및 저밀도장에서 혼합기형성과정의 제어가 가능하다. HCCI 엔진은 이러한 분위기조건에서 연료를 조기분사하기 때문에 착화성이 높은 경유와 휘발성이 높은 가솔린성분으로 함유한 혼합연료의 감압비등현상을 이용함으로써 액체연료의 분열, 미립화와 같은 물리적 제어 및 착화연소에 의한 화학적 제어를 실현할 수 있다. 본 연구는 혼합연료의 성분과 몰분율을 주요변수로 설정하여 정적용기 내에 분사된 연료분무의 감압비등현상을 슐리렌 화상 및 Mie 산란광을 촬영한 후, 화상처리과정을 통하여 이루어졌다. 그 결과로 감압비등현상은 비교적 저온 및 저밀도장에서 분무구조가 크게 변화함을 알 수 있었으며, 조기 연료분사시기에서 감압비등분무를 이용한 혼합기형성을 제어함으로써 HCCI 연소에 적용이 가능할 것으로 분석하였다.