• Membrane Journal
• /
• v.15 no.3
• /
• pp.198-205
• /
• 2005

Double-layered polymer films to assay the radioactive contamination were formulated using polysulfone (PSF) and cerium activated yttrium silicate (CAYS), consisting of a dense support layer and a CAYS-holding top layer prepared via the diffusion-induced phase inversion. As the vapor exposure process was omitted, the CAYS-holding layer showed a typical asymmetric structure, with CAYS being transfixed into the polymer network spread with large macropores. With the increase in vapor exposure time before immersion, morphology of the films transformed from asymmetric to sponge-like structures, with CAYS being localized in cellular structure. The border structure between the two layers reflects the phase inversion behavior of a cast solution during the coagulation. In the radioactive detection, the polymer phase in a film holding a sponge-like structure is so dense that the radionuclides, deposited on the film, could not filter through the phase, consequently resulting in the loss in the detection efficiency of the film.

• Microbiology and Biotechnology Letters
• /
• v.45 no.2
• /
• pp.124-132
• /
• 2017

Microbial secondary metabolites of marine organisms are regarded as major sources of structurally and biologically novel compounds with numerous potential uses. Sponge-microbe associations are among the most interesting sources for exploring bioactive compounds. In this study, the bacterial strain Microbulbifer sp. (127CP7-12) was isolated from the Asian marine sponge Hymeniacidon sinapium collected at an intertidal zone on the west coast of Korea. Cultured bacteria produced a violet pigment, and optimal culture conditions for violet pigment production were investigated. Maximum production of the violet pigment from the strain culture was observed under the conditions of $25^{\circ}C$, pH 6.0, and 3% NaCl. Acetone provided better extraction of the pigment from fermented broth compared with ethanol and methanol. The proposed structure of the major component in the extracted crude pigment was determined via high-performance liquid chromatography, nuclear magnetic resonance, mass spectrometry, and UV spectra analyses, which showed that the metabolite was the promising bioactive compound violacein. This study describes the examination of marine bioactive materials from microbe-engaged metabolites and the ecological implications of the sponge-microbe association in a changing ocean.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.50-62
• /
• 2014

An asymmetric microfiltration membranes were prepared with polysulfone by an immersion precipitation phase inversion method. Microfiltration membranes were prepared by polysulfone/N-methyl-2-pyrrolidone/polyvinylpyrrolidone/phosphoric acid casting solution and water coagulant. The vapor induced phase inversion method was used to prepare the membranes. The pore size and the morphology were changed by the phosphoric acid additive, the temperature of casting plate and the exposure time at the relative humidity of 74%. The morphology of membranes was investigated by scanning electron microscopy and microflow permporometer. By the addition of the phosphoric acid additive in the casting solution, the morphology of the prepared membranes were changed from a dense sponge structure to a loose asymmetric sponge structure. Due to the addition of catalytic amount of phosphoric acid to NMP casting solution, the mean pore size increased almost $0.2{\mu}m$ and the water flux increased about 3,000 LMH. The temperature of casting plate and exposure time had a apparent effect on the skin layer structure and the pore size and the porosity of the membrane.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.249-254
• /
• 1997

ABA-type block copolymers composed of poly(L-leucine)(PLL) as the A component and poly(ethylene glycol)(PEG) as the B component were synthesized by ring-opening polymerization of L-leucine N-carboxyanhydride initiated by primary amino group located at both ends of PEG chain. A silver sulfadiazine(AgSD)-impregnated wound dressing of sponge-type was prepared by the lyophilization method. Morphological structure of this wound dressing obtained by scanning electron microscopy(SEM) was composed of a dense skin layer and a macroporous inner sponge layer. Equilibrium water content(EWC) of wound dressing was above 10%. It increased with an increased of PEO content in the block copolymer due to the hydrophilicity of PEO. AgSD release from AgSD- impregnated wound dressing in PBS buffer(pH=7.4) was dependent on PEG composition in the block copolymer. Therefore, EWC and release of AgSD can be control by PEG composition. Antibacterial capacity of AgSD-impregnated wound dressing was examined in agar plate against Pseudmonas aeruginosa and Stapplococus aruous. Cytotoxicity of the wound dressing was evaluated by studing mouse skin fibroblast(L929). From the behavior of antimicrobial releasing and the investigation of the suppression of bacterial proliferation, it was supposed that the wound dressing containing antibiotics could protect the wound surfaces from bacterial invasion to suppress the bacterial proliferation effectively. In cytotoxicity observation, cellular damage was reduced by the control led released of AgSD from the LEL sponge matrix of AgSD-medicated wound dressing. In vivo test, granulous tissue formation and wound contraction or the AgSD and DHEA impregnated wound dressing were aster than any other groups.

• Korean Journal of Microbiology
• /
• v.46 no.3
• /
• pp.255-261
• /
• 2010

The bacterial community structure associated with two marine sponges, Hyrtios sp. 604 and Callyspongia sp. 612 collected from the South Pacific Ocean were analyzed by 16S rDNA-denaturing gradient gel electrophoresis (DGGE). The phylogenetic analysis showed that the bacterial community associated with Hyrtios sp. 604 contained diverse bacterial groups such as Chloroflexi, Firmicutes, Cyanobacteria, Alphaproteobacteria, Gammaproteobacteria, Actinobacteria, and Acidobacteria. Callyspongia sp. 612 harbored Chloroflexi, Cyanobacteria, Alphaproteobacteria, and Gammaproteobacteria. Hyrtios sp. 604 belonging to genus Hyrtios known to produce natural products showed greater bacterial diversity than Callyspongia sp. 612. Phylum Actinobacteria was shown to be one of dominant bacterial groups in Hyrtios sp. 604. Although the same phyla of bacteria were found in both sponge species, the spongeassociated predominant bacterial groups differed between the two sponges with different chemical characteristics from the same geographical location. Uncultured bacteria represented over 90% of the bacteria diversity present in all bacterial communities of the sponges.

• Journal of Marine Bioscience and Biotechnology
• /
• v.6 no.2
• /
• pp.76-83
• /
• 2014

Bacteria associated with marine sponges seemed to be concerned in halogenation/dehalogenation process of natural compounds. In the present study, the effect of hexabromobenzene (HBB) on the community structure of bacteria associated with a marine sponge Axinella sp. from Chuuk State under anaerobic condition was investigated. Regardless of 100 ppm HBB, most of detected microorganisms displayed high similarity with clones reported from coral or sponges. Amongst, Desulfovibrio marinisediminis like clones were dominant. Clones affiliated with Lentisphaerae and Fusibacter paucivorans (Clostridia) were detected at the conditions without HBB but clones affiliated with Vallitalea guaymasensis (Clostridia) increased its proportion with HBB. From these results and previous reports clones affiliated with D. marinisediminis and V. guaymasensis seemed to be concerned in halogenation/dehalogenation process.

• Animal cells and systems
• /
• v.12 no.2
• /
• pp.97-100
• /
• 2008

A new marine sponge in the family Tethyidae, Tethya uljinensis n. sp. was collected from Uljin, Korea in 2007. Halicometes koreana in the family Tethyidae was redescribed. Tethya uljiensis n. sp. is closely to Tethya simi. in skeletal structure and spicule composition. But, it differs in the size of spicules(stronyloxea) and shape of oxyaster.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.42.2-42.2
• /
• 2010

Recently, highly porous bone substitutes, which have interconnected open pore structure, have been focused on improving their mechanical properties and modifying their functions. Especially, it is highly required to develop functional gradient structured bone substitute which is available for controlling their material properties such as bioresorption rate and elastic modulus. Porous $ZrO_2$ scaffold was fabricated by the sponge replica method using PU sponge. After 3 times of dip coating and the subsequent oven drying, burning out and microwave sintering were carried out. Various $ZrO_2$-BCP powder mixtures were prepared depending on the ratio and coated on the $ZrO_2$ scaffold by dip coating process. X-ray diffraction analysis was performed to characterize the phase identification of the scaffolds. Microstructures of the bone substitutes were observed using scanning electron microscopy.

• Animal cells and systems
• /
• v.11 no.1
• /
• pp.55-60
• /
• 2007

Four new species, Semitaspongia jejuensis, Scalarispongia regularis, S. nigra and Dysidea violata are described from Jejudo, Korea. They were collected from 15 m depth by SCUBA diving and from intertidal area by hand. Semitaspongia jejuensis n. sp. is easily distinguished from other Semitaspongia species in growth form, conules, colour, skeletal structure, diameter of fibre and habitat. Scalarispongia regularis n. sp. is very close to S. scalaris (Schmidt, 1862) in skeletal structure, but S. scalaris has longer conules, larger meshes, longer distance between primary fibres, and highly developed subdermal canal system. Scalarispongia nigra n. sp. is very close to S. regularis in skeletal structure but can be easily distinguished by its black colour of external surface and growth form. Dysidea violata n. sp. is similar with D. ethria (Laubenfels, 1936) in sponge appearance, but D. etheria is clearly defined by its blue colour and thickness of fibre.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1014-1021
• /
• 1997

Studies were carried out on the preparation of several kinds of pulps from Sponge gourd fiber by KP, ASP, SP PAP, AP and addition of AQ pulping process. These unbeaten and beaten pulping fibers were observed their characteristics and fiber structure by SEM, FQA, Image analyzer and Micro projector. The results were summarized as follows; 1) The cooking condition which is the possible defibrilation of Shives are KP base($160^{\circ}C$, 2hr.), ASP base($155^{\circ}C$, 4hr.), PAP base($160^{\circ}C$, 1hr.). From the results, the kappa no. had the range of 12, 25, 10 each other. 2) The pulp yields of sponge gourd fiber obtained the range of KP 50~55%, ASP&60~70% and PAP 45~50%. SP base have the highest and contnets of KP&PAP base are much the same as woods. 3) Increasing amount of NaOH on Pulping was accelerated the defibrilation of Shives and was changed a morphology of pulping fiber quality such as fiber length, curl and kink index. 4) Addition of AQ on pulping process of sponge gourd fiber had a affect to raise the rate of delignification while protecting cellullosic components against degradation, especially defibrilation was very excellent, beated pulp much more easily and increased the fibrilation. 5) ASP system have higher bulk density, fiber bonding and protecting cellullosic components against degradation than KP or PAP. 6) The color reactions of the "C" stain solution showed blue or blue-gray with clean and transparency thin cell wall.