• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1269-1279
• /
• 1995

An experimental study is carried out on turbulent diffusion flames stabilized by a circular cylinder in a divergent duct flow. A commercial grade gaseous propane is injected from two slits on the rod as fuel. Flame stability limits, as well as size and temperrature of recirculation zone, are measured by direct and schlieren photographs to clarify the characteristics and structure of diffusion flames and to assess the effect of various divergent angle of duct. The results of the present study are as follows. Temperature in the recirculation zone decreases with increasing divergent angle. The blow-off velocity in parallel duct is higher than that in divergent duct. Critical blow-off velocity is expected to be about 8-12 degree through blow-off velocity pattern. Regardless of divergent angles, the length of recirculation zone is nearly constant, and this length becomes longer with rod diameter. Pressure gradient has an effect on the eddy structure in shear layer behind the rod. With the increase of divergent angle, large scale eddies by dissipated energy in shear layer are split into small scale eddies, and the flame becomes a typical distributedreacting flame.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.72-80
• /
• 2013

This study is to develop and evaluate an AFS and an ARS controllers to enhance lateral stability of a vehicle. A sliding mode control (SMC) and a fuzzy logic control (FLC) methods are applied to calculate the desired additional steering angle of AFS equipped vehicle or desired rear steer angle of ARS equipped vehicle. To validate AFS and ARS systems, an eight degree of freedom, nonlinear vehicle model and an ABS controllers are also used. Several road conditions are used to test the performances. The results showed that the yaw rate of the AFS and the ARS vehicle followed the reference yaw rate very well within the adhesion limit. However, the AFS improves the lateral stability near the limit compared with the ARS. Because the SMC and the FLC show similar vehicle responses, performance discrimination is small. On split-${\mu}$ road, the AFS and the ARS vehicle had enhanced the lateral stability.

• 대한치과교정학회지
• /
• 제17권2호
• /
• pp.299-310
• /
• 1987

The purpose of this study was to examine soft tissue and hardtissue changes following orthognathic surgery in patients with mandibular prognathism lateral cephalometric films were obtained immediate before surgery, 48 hours following surgery, and 6 months following surgery. 18 patients were selected (10 men, and 6 women) for this study, who had received orthognathic surgery. Statistical analysis for the each time interval differences were performed with the SPSS package The results were as follows, *In the cases of mandibular sagittal split osteotomy 1 LI point was moved backward (average 7.55mm) 48 hours following surgery. 6 months later, it was returned forward (average 1.1mm) Relapse rate was 14.6% 2 Pog was moved backward (average 8.3mm) 48 hours following surgery The ratio of horizontal change of soft tissue to hard tissue at pog is 0.95 1 *In the cases of maxillary Le-Fort I osteotomy & mandibular sagittal split osteotomy. 3. A point was moved forward (average 3.31mm) 48 hours following surgery. 6 months later, it was returned backward (average 0.31) Relapse rate was 9 4% 4 6 months later, the ratio of facial convexity angle change of soft tissue to hard tissue is 0.63 1.

• 한국분무공학회지
• /
• 제1권3호
• /
• pp.37-50
• /
• 1996

Computational fluid dynamics was used to optimize an A/C duct. Three dimensional flow analysis in an automotive A/C duct was performed computationally using various turbulence models and compared numerical predictions such as outlet flow split, surface pressure distribution along the duct to experimental data. Additionally, we studied the effect of location variation of 2nd branch on exit flow ratio and could find optimal location of 2nd branch. The design of an A/C duct was modeled and calculated to enhance the airflow distribution in each outlet using the STAR-CD computational fluid dynamics software. In results, modified $k-\varepsilon$ turbulence model allows a successful prediction of static pressure distribution particulary at around strong curvature but little improvement flow split. In the future, adoption of CFD to design an A/C duct with modified $k-\varepsilon$ model will bring benefits of producing more accurate prediction, and also give designers more detail information much more than now.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권1호
• /
• pp.100-107
• /
• 2008

First of all a good surgical access is considered among various approach methods to the cystic lesion. A poor surgical access can lead to a failure of the whole treatment. A sagittal split ramus osteotomy (SSRO) on the large cyst occurring in the mandibular ramus lets us not only reduce operation time, but can additionally contribute to a good visual field. In addition, a merit exists that it lets this operating method provide soft tissue adhesion for proximal and distal segment and decrease post operative necrosis. We experienced three cases of a large cyst on the mandibular angle and ramus. By employing a sagittal splitting of the mandible, it provided good surgical access and operation results without recurrence during a follow-up period. The surgical technique described may be helpful in treating similar large cysts.

• 한국수산과학회지
• /
• 제51권5호
• /
• pp.566-570
• /
• 2018

This study determined the acoustic target strength (TS; dB) of black seabream Acanthopagrus schlegeli off the southern coast of Korea. For the ex-situ measurements, 200 kHz split beam transducers were used, and a Kirchhoff-ray mode (KRM) model acoustic model was used for the calculation. The fork length and total weight of the black seabream ranged from 6.4 to 30.8 cm and 6.4 to 683.8 g. respectively 200 kHz, the TS could beexpressed as a function of fork length as: $TS_{max}=20log_{10}(FL)-60.35(R=0.92)$ and $TS_{avg.}=20log_{10}(FL)-66.89(R=0.88)$. These TS results for black seabream can be used for estimating the biomass of fish in acoustic surveys in coastal areas.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.280-288
• /
• 2004

Split-type nylon/polyester microfiber and polyester microfiber fabrics possess drapeability, softness, bulkiness, and smoothness, so that they can be applied in various industrial fields. In particular, these fabrics are able to absorb various organic solvents, and can be used as clean room materials. To investigate the chemical affinity between solvents and the compositional materials of these fabrics, the contact angle of thermally pressed film fabrics was measured with different solvents. The thermally pressed nylon/polyester fabric films showed a chemical attraction to formamide. The sorption properties of the microfiber fabrics were investigated using a real time testing device, and these tests showed that the sorption behavior was more influenced by the structure of the fibrous assembly than by any chemical attraction. The effect of the fabric density, specific weight, and sample structure on the sorption capacity and rate was examined for various organic solvents. The sorption capacity was influenced by the density and the specific weight of the fibrous assembly, and knitted fabric showed a higher sorption capacity than woven fabric. However, the sorption rate was less affected in lower viscosity solvents. On applying Poiseuille's Law, the lower viscosity solvents showed higher initial sorption rates, and more easily penetrated into the fibrous assembly.

• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.32-40
• /
• 1994

In this study by using EMAT(electro magnetic acoustic transducer)the artificial slit is installed on 12B-SUS pipe test piece. By making 4 cycle SH-burst (EMA) incidence to 45 .deg. angle, the signal data of pulse, received from EMAT are translated into digital-signal-processing- method SSP(Split Spectrum Processing) and Deconvolution method. The main conclusions obtained are as follows; (1) the signal data received from EMAT are translated with digital signal proc- essing of SSP-method and Deconvolution-method and this method shows exellent results more than Ultrasonic testing method does; (2) noise can well be removed by SSP with signal data, and resolution and S/N ratio are advanced; (3) when used with Ultrasonic wave general stainless steel has proporties of multiscattering and reflection phenomena, but resolution is progressed by using Deconvolution method;and (4) as addition-averaging-processing mumber is increasing, the resolution and S/N ratio are improved and the satisfactory signal is obtained.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권3호
• /
• pp.218-224
• /
• 2011

Purpose: The purpose of this study is to evaluate the post-operative skeletal stability after surgical correction of patients with mandibular prognathism by bilateral sagittal split ramus osteotomy (BSSRO) and to evaluate the horizontal relapse tendency after the surgery. Methods: Twenty-six patients with Class III dental and skeletal malocclusion were selected for this retrospective study. Fifteen of them underwent BSSRO for mandibular setback and eleven of them underwent two-jaw surgery (Lefort I and BSSRO). In each patient, lateral cephalometric radiographs were taken pre-operatively, post-operatively within 1 week, and post-operatively after eight months. After tracing of the cephalometric radiographs, various parameters were measured. The analyses were done by linear measurement to evaluate the change in position of hard tissue B point, pogonion and mandibular plan angle by examination on lateral cephalograms. Results: The horizontal relapse rate was 27.1% at B point and 31.6% at pogonion in patients who underwent BSSRO. The horizontal relapse rate of the group where the amount of correction exceeded 10 mm was 25.69% at B point. Conclusion: There were no statistical differences on the magnitude of setback and direction of rotation of the mandible in mandibular stability. There were also no statistical differences between single mandibular surgery and two-jaw surgery for mandibular stability.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권5호
• /
• pp.217-223
• /
• 2013

Objectives: Buccal fracture of the mandibular proximal bone segment during bilateral sagittal split ramus osteotomy (SSRO) reduces the postoperative stability. The primary aim of this study is to evaluate the effect of this type of fracture on bone healing and postoperative stability after mandibular setback surgery. Materials and Methods: Ten patients who experienced buccal fracture during SSRO for mandibular setback movement were evaluated. We measured the amount of bone generation on a computed tomography scan, using an image analysis program, and compared the buccal fracture side to the opposite side in each patient. To investigate the effect on postoperative stability, we measured the postoperative relapse in lateral cephalograms, immediately following and six months after the surgery. The control group consisted of ten randomly-selected patients having a similar amount of set-back without buccal fracture. Results: Less bone generation was observed on the buccal fracture side compared with the opposite side (P<0.05). However, there was no significant difference in anterior-posterior postoperative relapse between the group with buccal fracture and the control group. The increased mandibular plane angle and anterior facial height after the surgery in the group with buccal fracture manifested as a postoperative clockwise rotation of the mandible. Conclusion: Bone generation was delayed compared to the opposite side. However, postoperative stability in the anterior-posterior direction could be maintained with rigid fixation.