• Membrane Journal
• /
• v.29 no.6
• /
• pp.314-322
• /
• 2019

A worsened drought in Chungnam province of Korea due to climate change and increasing water demand at Daesan industrial complex have motivated the 100,000 ㎥/d seawater desalination project. In this study, therefore, the comprehensive analysis of parameters affecting the reverse osmosis (RO) performance was conducted. Under the various conditions of feedwater salinity and temperature in Daesan, energy consumption was calculated as 2.39 ± 0.13 kWh/㎥. The decrease in membrane flux and recovery rate positively impacted annual operation cost. The average total dissolved solids (TDS) of the permeate and energy consumption with highly permeable membrane according to the membrane manufacturer were 3.84 mg/L and 2.22 ± 0.13 kWh/㎥, respectively. In addition, energy saving up to 0.29 kWh/㎥ or cost reduction of membrane module up to 15.6% is expected by changing the RO configuration from full two pass to partial or split partial two pass.

• Journal of Korean Academy of Nursing
• /
• v.46 no.3
• /
• pp.431-442
• /
• 2016

Purpose: This paper was conducted to validate the Korean version of the Peer Group Caring Interaction Scale (PGCIS-K) that measures caring behaviors as experienced by nursing students. Methods: Translation of the PGCIS-K was validated through forward-backward translation methods. Survey data were collected from 218 nursing students in a nursing school. Construct validity and criterion-related validity were evaluated. Internal consistency and the Guttman split-half coefficient were calculated to assess reliability. Results: The PGIS-K showed reliability except for 4 items (Cronbach's ${\alpha}=.91$, Guttman split-half coefficient=.85), which were low (<.30) or negatively correlated with the total scale. A 12-item reduced form of the PGCIS-K was developed by item-analysis and construct validity evidence. Factor loading for the 12 items on 2 factors ranged from .47~.82, which explained 58.4% of the total variance. Two factors were named 'modeling and assistance (Cronbach's ${\alpha}=.87$)' and 'communication and sharing (Cronbach's ${\alpha}=.82$)'. Convergent validity, discriminant validity, and criterion validity were supported according to the correlation coefficients of the 2 factors with other measure. Conclusion: The findings suggest preliminary evidence that the 12-item PGCIS-K can be used to measure nursing students' peer group caring interactions in Korea. Additional studies are recommended to continue the psychometric evaluation of this scale. Also, it can be extended to measure graduate nursing students or staff nurses' peer group caring interaction.

• Korean Journal of Optics and Photonics
• /
• v.35 no.2
• /
• pp.49-60
• /
• 2024

We analyze the number of phase screens required for the simulation of a high-energy laser beam's propagation over an atmospheric channel. For high-energy lasers exceeding tens of kilowatts (kW) in power, the laser beam is mainly affected by atmospheric turbulence and thermal blooming. When using the split-step method to implement losses due to atmospheric absorption and scattering and distortion of the beam due to turbulence and thermal blooming, the number of phase screens is a critical factor in determining the accuracy and time required for the simulation. By comparing simulation results obtained using a large number of phase screens (e.g., 150 screens) under a wide range of atmospheric turbulence conditions, we provide new guidelines for the number of phase screens required for simulating the beam propagation of a high-power laser below 2.5×10⁶ W/m² (e.g., a 500-kW laser beam having a 50-cm diameter).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.175-181
• /
• 2004

Analysis of brake characteristics has progressed rapidly in recent years, as computer techniques have developed. However, there are many problems in predicting braking characteristics, due to the numerous design variables of the brake system. Therefore, a synthetic braking performance analysis is required for all brake system parts such as master cylinder, booster, control valve and split system. In this paper, a program which can analyze braking performance such as force distribution, braking efficiency, pedal force and pedal travel, is presented. The preprocessor of the program helps users prepare input files through a dialog box. An additional postprocessor makes the graph presentation of solved results. Also, a simple example problem is applied to show the usefulness of the presented program.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.04a
• /
• pp.381-388
• /
• 2004

We propose a 2D 'crack' element for the simulation of propagating crack with minimal remeshing. A regular finite element containing the crack tip is replaced with this novel crack element, while the elements which the crack has passed are split into two transition elements. Singular elements can easily be implemented into this crack element to represent the crack-tip singularity without enrichment. Both crack element and transition element proposed in our formulation are mapped from corresponding master elements which are commonly built using the moving least-square (MLS) approximation only in the natural coordinate. In numerical examples, the accuracy of stress intensity factor K/sub I/ is demonstrated and the crack propagation in a plate is simulated.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.4
• /
• pp.53-57
• /
• 2007

In paper, We evaluated for various diode type ESD protection device using TLP measurement method. An Evaluation diode is divided to Enclosed type and Stripe type as pattern style in extensive. These diodes is split up followed factor that Anode-to-Cathod space, N+ region width, Multi type and Contact to Active space. After a TLP measurement, we can be got the Vt2, It2 by I-V characteristic values. In the results, diode of enclosed type is present relatively higher Current capability(It2) than stripe type in a same voltage conditions. And the Second-breakdown voltage(Vt2) were that Stripe type's diode higher than Enclosed type's diode as have $14{\sim}15V$. Finally we suggest the best diode design condition as ESD protection device using entire consequence.

• Child Health Nursing Research
• /
• v.13 no.3
• /
• pp.265-272
• /
• 2007

Purpose: The purpose of this study was to develop a Maternal-Fetal Interaction Belief Scale (MFIBS). Method: The research design was a methodological study. The items generated for this scale were drawn from a comprehensive literature review. Content validity was established for the MFIBS. The 26-item scale was developed to measure the construct of the MFIBS during pregnancy and tested on 186 pregnant women. Results: The final tool consist of 20 items which were sorted into 6 factors by factor analysis. The factors were identified as 'influence of pregnancy (5 items)', 'ability of fetus (3 items)', 'maternal-fetal interaction behavior (3 items)', 'practice of taegyo (3 items)', 'ability of infant (3 items)', and 'taemong (3 items)'. The six factors explained 62.37% of the total variance in the MFIBS. The Cronbach's alpha coefficient for internal consistency was .81 and the reliability of the subscales ranged from .60-.85 Guttman split-half coefficient was .66. Conclusions: This scale proves to be a effective, useful tool and suitable in Korean women for measuring the Maternal-Fetal Interaction Belief. Future studies are required for further refinement of the scale.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.95-96
• /
• 2017

A three-level inverter is widely used thanks to its excellent performances, but the voltage may fluctuate at the neutral point of the split DC-Link. Neutral point voltage fluctuations cause inverter performance degradation and switching element damage, so the neutral point voltage control is essential. However, the neutral point control can be also limited by modulation index and power factor. This paper analyzes the limitation of the neutral point voltage control due to the limitation of zero-sequence voltage, and suggests a method to determine the region where the PWM has to be changed for a better neutral point control.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.42 no.1
• /
• pp.43-52
• /
• 2017

We consider the order consolidation problem that arises in production systems where customer orders are processed in batches. The problem involves maximizing the number of batches while satisfying the following conditions: (i) the total quantity processed in each batch must be above a prescribed level; (ii) the quantity in an order can be split and processed in more than one batches; (iii) each batch can include up to two different orders but can do so only when the two orders are compatible pair. This problem is known to be NP-hard and max-SNP hard. In this study, we develop an approximation algorithm with factor 1/3.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1778-1783
• /
• 2000

When visual intrusion is an important factor, it is desirable to find alternative methods of improving the insertion loss of a noise barrier without increasing the height. Therefore, the primary object of the work attenuates the noise due to transport vehicle by small interference device installed at noise barrier edge. In this paper the performance of noise barriers with attached interference device, in terms of shape, absorptive material and split panel, are examined using the boundary element approach. Also, the scale models are moanted in an anechoic chamber and the frequency of the sound sources are appropriately scaled to simulate full scale site conditions. Lastly, experimental measurements of the designs are executed for a range of frequencies and receiver positions, and are compared with the results of numerical modeling.