• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1125-1134
• /
• 2024

This paper presents a validation study of the subchannel analysis code SLTHEN used for the core thermal-hydraulic design of the Prototype Gen-IV sodium-cooled fast reactor (PGSFR). To assess the performance of the ENERGY model of SLTHEN, four liquid metal heating experiments conducted by ORNL, WARD, and KIT with hexagonal assemblies of wire-wrapped rod bundles were analyzed. These experiments were performed with 19-and 61-pin bundles and varying power distributions of axial and radial peaking factors up to 1.4 and 3.0, respectively. The coolant subchannel temperatures measured at different axial locations were compared with the SLTHEN predictions with the Novendstern, Chiu-Rohsenow-Todreas (CRT), and Cheng-Todreas (CT) correlations for flow split and mixing in wire-wrapped pin bundles. The results showed that the SLTHEN predicts the measured subchannel temperatures reasonably well with root-mean-square errors of ~10 % and maximum errors of ~20 %. It was also observed that the CRT and CT correlations consistently outperform the Novendstern correlation.

• Economic and Environmental Geology
• /
• v.18 no.3
• /
• pp.239-246
• /
• 1985

Uranium-thorium separation technique from shallow sediment and ${\alpha}$-source electrodeposition technique are established in the present work, and uranium series disequilibrium dating method is applied to the quaternary piston core from Sangback-do, South Sea of Korean Peninsula. The age of the piston core (depth 200~300cm) sampled from Latitude $34^{\circ}06^{\prime}37^{{\prime}{\prime}}$, Longitude $127^{\circ}37^{\prime}37^{{\prime}{\prime}}$ was determined as ranging from $9.0{\pm}2.2$ to $22.9{\pm}3.3$ Ky B.P, i.e., Later Pleistocene, older than Holocene which was stratigraphically known in the previous study. The sedimentation rate in the area is regularly increased according to the depth of the sedimentation layer. Except a few split sections of the piston core the sedimentation rates are avarage 7.2cm/1,000 years. Where sedimentation layer is deeper, then sedimentation rate tend to be slower. It must be pointed in age calculation that initial $^{230}Th/^{234}U$ radioactivity ratio is much influenced when detrital material was introduced in the sample. The $^{230}Th/^{234}U$ activity ratio measured in the present work is 0.06 at $^{232}Th=0$, and this value shows higher analytical errors because of the low· radioactivity of $^{230}Th$ in the samples.

• Mycobiology
• /
• v.29 no.2
• /
• pp.73-79
• /
• 2001

The Polyporaceae is a chaotic mass of genera having poroid hymenophores in the Aphyllophorales. To classify the Polyporaceae into more natural groups, phylogenetic analyses were performed using nuclear small subunit ribosomal DNA sequences. Thirty-six species from the families of the Polyporaceae, the Hymenochaetaceae, the Ganodermataceae, the Corticiaceae, the Bondarzewiaceae, the Meruliaceae, the Steccherinaceae and the Lentinaceae were phylogenetically compared. By performing maximum parsimony analysis, seven phylogenetically meaningful groups were identified and discussed. The hyphal system, presence or absence of clamps, and the type of rot were found as important characters in defining the groups. Each group was phylogenetically significant enough to be a core member of each family when the Polyporaceae was split into smaller and more natural families.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.12 s.243
• /
• pp.1567-1573
• /
• 2005

This paper introduces a new active magnetic bearing(AMB) that can provide both radial and axial control functions in one bearing unit without axial disk. It has a structure of double four-pole AMB or a four-pole AMB where each core is split into two axially. The cores have two kinds of coil winding; they independently generate fluxes on the planes perpendicular or parallel to the shaft. For the radial control action, it works just like a conventional four-pole AMB. Meanwhile, for the axial control, it uses the Lorentz force generated by the interaction of the bias flux for radial control and the axial control flux. In this paper, the proposed structure, principle, and design process based on magnetic flux analysis are introduced, and its feasibility is experimentally verified by using a simple PD control algorithm with a feedforward loop to compensate the coupled flux effect.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.160-165
• /
• 2002

A study on digital processes of injection mold in reverse engineering are presented. Reverse engineering is useful fur several cases, where user has no geometry information of object. Laser scanner is used to obtaining 3D coordinates of object. Sequences to process cloud data are described; sampling to reduce number of points, sorting to adjust the point order, and fitting to curve and surface, and so on. Split slide structure of mold is used fur undercut part and high viscosity material. Flow of injection molding are analysed to correct cooling channel and simulate molding conditions. NC tool paths are generated to carve core and cavity. The processes are performed in digital data for reduction of lead time and consecutive geometry data.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.45-48
• /
• 2005

The purpose of this study is to investigate evaluation technique of damaged depth of concrete exposed at high temperature. In order to evaluate damaged depth of core picked at member under fire, the 12 specimens have been made with variables of concrete strength(20Mpa, 40Mpa, 60Mpa). Water absorption after heating has been measured and split tensile stress test was performed. The results show that the deeper of the depth from heating face, water absorption ratio is smaller and tensile failure stress is larger. Using this technique at damage evaluation of fired structure, We evaluate damaged depth of member under fire and determine the reasonable strengthening range.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.292-295
• /
• 2008

We propose a PON repeater system which transports multiple PON channels at the same time over the physical limit of the standard E-PON reach. To increase the physical reach up to 60km, we used the O-E-O (optic-electric-optic) signal regeneration on an active remote terminal which is placed between a central office and passive remote nodes. Also, by incorporating the well-established WDM technology to aggregate multiple E-PON channels, we successfully increased the split ratio (the number of subscribers per fiber core) to over 256.

• Communications for Statistical Applications and Methods
• /
• v.17 no.3
• /
• pp.377-390
• /
• 2010

In the case of time-series analysis, it is often more convenient to rely on the frequency domain than the time domain. Spectral density is the core of the frequency-domain analysis that describes autocorrelation structures in a time-series process. Possible ways to estimate spectral density are to compute a periodogram or to average the periodogram over some frequencies with (un)equal weights. This can be an attractive tool to measure the similarity between time-series processes. We employ the metrics based on a smoothed periodogram proposed by Park and Kim (2008) for the classification of different classes of time-series processes. We consider several lag windows with unequal weights instead of a modified Daniel's window used in Park and Kim (2008). We evaluate the performance under various simulation scenarios. Simulation results reveal that the metrics used in this study split the time series into the preassigned clusters better than do the raw-periodogram based ones proposed by Caiado et al. 2006. Our metrics are applied to an economic time-series dataset.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1149-1157
• /
• 2017

The satisfiability problem is always a core problem in artificial intelligence (AI). And how to improve the efficiency of algorithms solving the satisfiability problem is widely concerned. Algorithm IER (Improved Extension Rule) is based on extension rule. The number of atoms and the number of clauses affect the efficiency of the algorithm IER. DPLL rules are helpful to reduce these numbers. Then a complete algorithm CIER based on splitting rule and extension rule is proposed in this paper in order to improve the efficiency. At first, the algorithm CIER (Complete Improved Extension Rule) reduces the scale of a clause set with DPLL rules. Then, the clause set is split into a group of small clause sets. In the end, the satisfiability of the clause set is got from these small clause sets'. A strategy MOAMD (maximum occurrences and maximum difference) for the algorithm CIER is given. With this strategy, a better arrangement of atoms could be got. This arrangement could make the number of small clause sets fewer and the scale of these sets smaller. So, the algorithm CIER will be more efficient.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.3
• /
• pp.1-7
• /
• 2008

The geotextile tube shall be sewen with geotextile longitudinally in the shape of hose and it shall be filled hydraulically through filling ports at the proper intervals to construct structure. Geotextile container shall be sewen after spreading of geotextile on the split barge and sealed shut after the filling soil, and then moved and positioned at the required position. And the geotextile container passes through the bottom of barge by opening split barge and drops to the seabed to form structure. This structure for the ${\bigcirc}{\bigcirc}$ project, UAE and we would propose that geotextile containment for core material of power plant breakwater to be constructed for lower bunds with containers up to -4.0m and do upper parts with the structures of tube up to 0.0m. For the application of proposed geotextile containment, review on stability of breakwaters and design consideration were adopted. The evaluation on stability of geotextile containment was classified by 3 items, internal design consideration for material selection, reviews on stability for individual and global structure. In this research, the geothermal analysis was performed to estimate the geothermal behavior of central breakwater. Central breakwater is located boundary of intake and outfall channel, it is mean that the central breakwater is thermal boundary of intake low temperature sea water and outfall high temperature sea water. Therefore, it is required to be designed a low permeability to ensure no mix of intake and outfall waters.