• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3015-3020
• /
• 2007

An experimental study of the dynamic characteristics of the free rising oblate spherical bubble is investigated. As noted by Saffman, the characteristics of the spiral motion are defined with parameters of the spiral frequency, spiral radius, and rising velocity. High speed camera recorded every detail information of free rising bubble. The spiral number, the bubble rise velocity, and the angular velocities were measured for the bubble size between 1.0mm to 20.0mm in diameter. In order to make clear trajectory, we employed the Fast Fourier Transformation for the normal digital camera data to synchronize with the high speed camera data. It was found that the spiral number suggested here was monotonically decreased as the bubble size increases. The present observation, however tells us that previous Saffman's formulation shows a good agreement with the trend, but over estimated spiral number. Therefore, it is recommended that Saffman's theoretical study is needed to be improved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.103-104
• /
• 2011

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.1
• /
• pp.37-44
• /
• 2010

New features of motion compensation, such as variable block size and multiple reference frames are introduced in H.264/AVC. However, these new features induce significant implementation complexity increases. In this paper, an efficient architecture for spiral-type motion estimation is proposed. First, we propose a hardware-friendly spiral search order. Then, an efficient processing element (PE) architecture for ME is proposed to achieve the proposed search order. The improved PE enables one-pixel-move of the reference pixel data to top, bottom, right, and left by four ports for input and output. Moreover, the parallel calculation architecture to calculate all block size with the SAD of 4x4 is introduced in the proposed architecture. As the result of hardware implementation, the hardware cost is about 145k gates. Maximum clock frequency is 134 MHz in the case of FPGA (Xilinx Vertex5) implementation.

• Journal of Acupuncture Research
• /
• v.23 no.2
• /
• pp.165-172
• /
• 2006

Objectives : This study was designed to estimate the effects of Spiral Taping theraphy on low back pain or neck pain patients by using pressure pain threshold, visual analogue scale(VAS), and range of motion(ROM). Methods : The patients were allocated into two groups by randomisation. Spiral Taping theraphy group consisted of 11 patients and acupuncture theraphy group consisted of 10 patients. The degree of improvement of neck pain was evaluated by pressure pain threshold, VAS, and ROM before treatment and after treatment. The patients were commonly treated with acupuncture theraphy. After acupuncture Spiral Taping theraphy was peformed in Spiral Taping theraphy group. Results : Pressure pain threshold and VAS were significantly different between two groups. In Spiral Taping theraphy group the pressure pain threshold of the all points was significantly increased and VAS was significantly decreased than control group. But there was no significant difference between the two groups in ROM. Conclusion : The effectiveness of Spiral Taping theraphy on low back pain and neck pain patients was shown through pressure algometer and VAS. These imply that Spiral Taping theraphy may be useful for on low back pain or neck pain. Further study is needed about Spiral Taping theraphy.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.388-396
• /
• 2003

In this paper, a fast motion search algorithm that performs motion search for variable blocks in integer pixel unit is proposed. The proposed method is based on the successive elimination algorithm (SEA) using sum norms to find the best estimate of motion vector and obtains the best estimate of the motion vectors of blocks, including 16${\times}$8, 8${\times}$16, and 8${\times}$8, by searching eight pixels around the best motion vector of 16${\times}$16 block obtained from all candidates. And the motion vectors of blocks, including 8${\times}$4, 4${\times}$8, and 4${\times}$4, is obtained by searching eight pixels around the best motion vector of 8${\times}$8 block. The proposed motion search is applied to the H.264 encoder that performs variable blocks motion estimation (ME). In terms of computational complexity, the proposed search algorithm for motion estimation (ME) calculates motion vectors in about 23.8 times speed compared with the spiral full search without early termination and 4.6 times speed compared with the motion estimation method using hierarchical sum of absolute difference (SAD) of 4${\times}$4 blocks, while it shows 0.1dB∼0.4dB peak signal-to-noise ratio (PSNR) drop in comparison to the spiral full search.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.167-170
• /
• 2000

In this paper, we present a fast algorithm for the motion estimation using the efficient selection of an initial search position. In the method, we select the initial search position using the motion vector from the subsmpled images, the predicted motion vector from the neighbor blocks, and the (0,0) motion vector. While searching the candidate blocks, we use the spiral search pattern with the successive elimination algorithm(SEA) and the partial distortion elimination(PDE). The experiment results show that the complexity of the proposed algorithm is about 2∼3 times faster than the three-step search(TSS) with the PSNR loss of just 0.05［dB］∼0.1［dB］ than the full search algorithm PSNR. The search complexity can be reduced with quite a few PSNR loss by controling the number of the depth in the spiral search pattern.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.1
• /
• pp.147-156
• /
• 2004

In this paper, a new fast motion estimation algorithm which is based on the Block Sum Pyramid Algorithm(BSPA) is presented. The Spiral Diamond Mesh Search scheme and Partial Distortion Elimination scheme of Efficient Multi-level Successive Elimination Algorithm were improved and then the improved schemes were applied to the BSPA. The motion estimation accuracy of the proposed algorithm is nearly 100% and the cost of Block Sum Pyramid Algorithm was reduced in the proposed algorithm. The efficiency of the proposed algorithm was verified by experimental results.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.235-242
• /
• 2000

In this paper, the dynamic characteristics of coupled herringbone groove journal bearings and spiral groove thrust bearings with conical motion were numerically analyzed, The bearing performance characteristics were calculated by the perturbation method and are solved by FDM. Stability of bearing was obtained from the threshold of instability.

• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.128-136
• /
• 2008

In this paper, we propose a variable step search fast motion estimation algorithm using local statistics of neighboring motion vectors. Using the degree of correlation between neighboring motion vectors, motion search range is adaptively adjusted to reduce unnecessary search points. Based on the adjusted search range, motion vector is obtained by variable search step. Experimental results show that the proposed algorithm has the capability to dramatically reduce the search points and computing cost for motion estimation, comparing to fast full spiral search motion estimation and other fast motion estimation.

• Journal of computational fluids engineering
• /
• v.4 no.1
• /
• pp.27-33
• /
• 1999

Spiral tube heat exchangers can find numerous applications in many engineering fields. Flow in spiral tubes is interest to engineers due to occurrence of secondary flow which enhances the cross-sectional mixing and the heat transfer rate. In the present study, an incompressible viscous 3-D flow in spiral tubes with rectangular cross-section of various torsion rate and Reynolds number is studied by using a finite volume method. It is shown that the axial velocity profile is affected by the secondary flow motion. Because there is some difference from correlation proposed by Hur et al., a lot of analysis and arrangement of experimental results are needed. This study showed the results of variation of hydrodynamic entry length for torsion and Re numbers.