• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.3
• /
• pp.228-239
• /
• 2016

CNUSAIL-1 is a 3U-sized cube satellite with $4m^2$ small solar sail which is currently being developed at the Chungnam National University. The primary purpose of the CNUSAIL-1 is successful sail deployment in LEO and its operation for investigating its effect on satellite orbit and attitude as well as performing de-orbiting using the sail membranes as drag sail at the final phase. The system design and mechanism of solar sail deployment is introduced, and optical and tensile tests are carried out for the material of membranes and booms for its safety and performance verification. The ground test is carried out to verify its performance for sail deployment and satellite through comparison between folding methods by determining its folding patterns, thickness of spiral spring and angular velocity measurement in a low-friction environment.

• Transactions of Materials Processing
• /
• v.31 no.4
• /
• pp.186-193
• /
• 2022

The application of UHSS sheet is being expanded up to 50% to reduce the weight of automobiles and improve safety. However, due to the high strength and low elongation of the ultra-high tensile strength steel sheet, product defects such as spring back and mold defects such as cracks and chippings also occur. In this study, Pin/Ring on Disc and Spiral wear tests were conducted to evaluate the durability of Ti/Cr-coated molds for forming 1.2GPa grade UHSS sheets. Component analysis and thickness were measured for each coating layer, and hardness and adhesion were investigated to determine mechanical properties. Combining the results of various wear tests, it was found that the TiAlN coating had the best wear and sticking resistance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03a
• /
• pp.7-7
• /
• 2010

Energy harvesting from the environment has been of great interest as a standalone power source of wireless sensor nodes for Ubiquitous Sensor Networks(USN). In particular, the piezoelectric energy harvesting from ambient vibration sources has intensively researched because it has a relatively high power density comparing with other energy scavenging methods. Through recent advances in low power consumption RF transmitters and sensors, it is possible to adopt a micro-power energy harvesting system realized by MEMS technology for the system-on-chip. However, the MEMS energy harvesting system has some drawbacks such as a high natural frequency over 300 Hz and a small power generation due to a small dimension. To overcome these limitations, we devised a novel power generator with a spiral spring structure as shown in the figure. The natural frequency of a cantilever could be decreased to the usable frequency region (under 300 Hz) because the natural frequency depends on the length of a cantilever. In this study, the natural frequency of the energy harvester was a lower than a normal cantilever structure and sufficiently controllable in 50 - 200 Hz frequency region as adjusting weight of a proof mass. Moreover, the MEMS energy harvester had a high energy conversion efficiency using a shear mode ($d_{15}$) is much larger than a 33 mode ($d_{33}$) and the energy conversion efficiency is proportional to the piezoelectric constant (d). We expect the spiral type MEMS power generator would be a good candidate for a standalone power generator for USN.

• Structural Engineering and Mechanics
• /
• v.47 no.3
• /
• pp.345-359
• /
• 2013

For the purpose of investigating the free vibration response of the spatial curved beams, the governing equations are derived in matrix formats, considering the variable curvature and torsion. The theory includes all the effects of rotary inertia, shear and axial deformations. Frobenius' scheme and the dynamic stiffness method are then applied to solve these equations. A computer program is coded in Mathematica according to the proposed method. As a special case, the dynamic stiffness and further the natural frequencies of a cylindrical helical spring under fixed-fixed boundary condition are carried out. Comparison of the present results with the FEM results using body elements in I-DEAS shows good accuracy in computation and validity of the model. Further, the present model is used for reciprocal spiral rods with different boundary conditions, and the comparison with FEM results shows that only a limited number of terms in the resultant provide a relatively accurate solution.

• Journal of Power Electronics
• /
• v.2 no.1
• /
• pp.11-18
• /
• 2002

The development of the solar and the wind energy is necessary since the future alternative energies that have no pollution and no limitation are restricted. Currently MW Class power generation system has been developed, but it still has a few faults with the weather condition. In order to solve these existing problems, combined generation system of photovoltaic and wind power was suggested. It combines wind power energy and solar energy to have the supporting effect from each other. However, since even combined generation system cannot always generate stable output with everchanging weather condition, power storage apparatus that uses elastic energy of spiral spring to combined generation system was also added for the present study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2048-2053
• /
• 2011

The aim of this paper is to propose an energy harvesting system by converting mechanical energy of revolving door into electrical energy. The method of energy harvesting system is discussed on two methods: one is the energy-harvester using gear shaft coupling system, and the other is the energy-harvester using spiral spring system. The former is generated by coupling the shaft of rotating door with generator system, while the latter is generated by connecting end-effector of door with the string of generator system. We present the experimental results for two developed energy-harvester. Finally, a comparison between these results is presented to show the validity of energy-harvester.

• KSBB Journal
• /
• v.4 no.2
• /
• pp.78-86
• /
• 1989

The effective saccharification of cellulosic biomass to glucose is the most critical step for the conversion of renwable biomass to alternative liquid fuel. The enzymatic hydrolysis of biomass can be significantly enhanced provide the attrition milling media is added during hydrolysis. The enhancing mechanism of hydrolysis reaction in an agitated bead system was investigated. An attrition-reactor (bioattritor) which installed specially designed torque measuring apparatus was developed, and the potimal saccharification conditions of bioattritor were determined. The relationship between the power consumption required for agitation of attrition-milling media and enhanced extent of hydrolysis of biomass was compared to evaluatic economic feasibility of the process.

• Journal of The Korean Astronomical Society
• /
• v.37 no.4
• /
• pp.211-216
• /
• 2004

We present the results of an H I aperture synthesis mosaic of the Large Magellanic Cloud (LMC), made by combining data from 1344 separate pointing centers using the Australia Telescope Compact' Array (ATCA) and the Parkes multibeam receiver. The resolution of the mosaiced images is 50" (<15 pc, using a distance to the LMC of 55kpc). This mosaic, with a spatial resolution .15 times higher than that which had been previously obtained, emphasises the turbulent and fractal structure of the ISM on the small scale, resulting from the dynamical feedback of the star formation processes with the ISM. We also have done a widefield panoramic survey of H$\alpha$ emission from the Magellanic Clouds with an imager mounted on the 16-inch telescope at Siding Spring Observatory. This survey produced H$\alpha$ images which are equal to the ATCA survey in area coverage and resolution. This survey allows us to produce a continuum-subtracted image of the entire LMC. In contrast with its appearance in the H$\alpha$ image, the LMC is remarkably symmetric in H I on the largest scales, with the bulk of the H I residing in a disk of diameter 8. $^{\circ}4$ (7.3 kpc) and a spiral structure is clearly seen. The structure of the neutral atomic ISM in the LMC is dominated by H I filaments combined with numerous shells and holes.

• Microbiology and Biotechnology Letters
• /
• v.17 no.4
• /
• pp.349-357
• /
• 1989

Uncooked starch can be effectively saccharified in an enzyme reaction system containing attrition-milling media. To develope the high efficiency bioattritor, an agitated bead type bioreactor was constructed, and its effectiveness was evaluated. The optimal operation condition of bioattritor was found to be 300 g glass bead/L, 200 rpm, standard type impeller for 220 g/L of uncooked corn starch. The torque under the various operational conditions were also measured. The interrelation-ship between energy consumption for agitation of attrition-milling media and enhanced extent of saccharification of uncooked starch was evaluated, Power consumption was measured to be around 1.53 watt/L under the optimal operation condition. The attrition coupled enzyme reaction system is identified to tie a very excellent energy saying process for saccharification of uncooked starch, and seems to have a bright prospect of industrial application.

• Sim-seong Yeon-gu
• /
• v.37 no.2
• /
• pp.149-183
• /
• 2022

The oracle of the I Ching, divination can be understood as 'synchronicity phenomenon' in analytic psychology. In order to experience divination actually, it requires a religious attitude that asks questions with a serious mind when a person is in trouble that consciousness reaches its limit. It is not just a passive attitude, but a modest, active attitude to ask what I can do now. The experience of the oracle of the I Ching connected to supra-consciousness is similar to 'active imagination'-talking with the archetype of collective unconsciousness-and is 'the process of finding the rhythm of Self-archetype, the absolute wisdom of unconsciousness.' One month before my father's death, I took care of him who couldn't communicate verbally and I divination with a question 'What can I do for my father and me now?' The I Ching's answer was hexagram 19 Lin 臨, nine at the beginning. It's message was '咸臨貞吉 joint approach. perseverance brings good fortune.' 志行正也 we must adhere perseveringly to what is right.' Through this phrase, I learned the attitude of waiting for life after death as if 'joyful obedient' to the providence of nature that spring comes after winter. And I found that keeping the touching emotion of meeting infinity (in analytical psychological terms, 'Self') with perseveration is to do the true meaning of life beyond popular money-mindedness. And six months before my father's death, I had a dream about the afterlife. In the process of interpreting that dream, I learned not only from the shock of the direct message that 'it is a truth that there is something after death,' but also the regeneration of the mind through introversion from the similarity between the closed ward and '黃泉'-chinese underworld through amplification. And I learned the importance of an open attitude to accept new things through the 'window to eternity' symbolized by the white iron gate. In my father's catholic funeral ritual, I had hope that the catholic doctrine 'Communio Sanctorum'-A spiral cycle in which the living and the dead help each other may be real as well as a symbol of the individuation process in which consciousness and unconsciousness interact in our minds. Through the consolation received through the funeral visit of many people I met in my life, I found the answer that the path to contact with infinity begins with loving the beings in front of me. I tried to understand this continuous experience by the perspective of analytical psychology.