• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.245-252
• /
• 2013

Objective: This paper analyzes the changes on stride parameters, joint angles, and trajectories of the body parts due to high heels during walking and explains the causal relationship between the changes and high heels. Background: This study aims to indicate the comprehensive gait changes by high heels on the whole body for women wearing high heels and researchers interested in high-heeled walking. Method: The experiment was designed in which two different shoe heel heights were used for walking (1cm, 9.8cm), and twelve women participated in the test. In the experiment, 35 points on the body were tracked to extract the stride parameters, joint angles, and trajectories of the body parts. Results: Double support time increased, but stride length decreased in high-heeled walking. The knee inflexed more at stance phase and the spine rotation became more severe. The trajectories of the pelvis, the trunk and the head presented outstanding fluctuations in the vertical direction. Conclusion: The double support time and the spine rotation were changed to compensate instability by high heels. Reduced range of motion of the ankle joint influenced on the stride length, the knee flexion, and fluctuations of the body parts. Application: This study can provide an insight of the gait changes by high heels through the entire body.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.12 s.255
• /
• pp.1509-1517
• /
• 2006

The intervertebral fusion was reported to increase the degeneration of the neighboring region. Recently, a new technique of inserting an interspinous process fixator has been introduced to minimize the degenerative change in the lumbar spine. This study analyzed biomechanical effects of the fixator in the lumbar spine, and designed a new prototype to improve flexibility of the fixator with a reduced size. The evaluation was based on the displacement, stiffness and von-Mises stress obtained from the mechanical test and finite element analysis. A finite element lumbar model of L1 to L5 was constructed. The finite element model was used to analyze intervertebral fusion, insertion of a commercial fixator and a new prototype. The range of motion of intervertebral segments and pressures at vertebral discs were calculated from FEA. The results showed that the stiffness of the prototype was reduced by 32.9% than that of the commercial one.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.14 no.1
• /
• pp.61-76
• /
• 2019

Objectives : The purpose of this study was to report the clinical results of various medical methods (including Chuna joint mobilization) used to treat a single patient with polyneuritis. Methods : We treated a 46 year-old female patient diagnosed with polyneuritis using various methods, including acupuncture, moxibustion, infrared therapy, herbal medication, Western medication, Chuna manual therapy, and physical therapy. We evaluated the results using the numeric rating scale (NRS), manual muscle test (MMT), active range of motion (ROM), modified barthel index (MBI). Other evaluation scale included Deep tendon reflex and thickness of muscle especially forearm and lower leg. Results : Following treatment using a combination of the above methods, the general overall condition of the patients was significantly improved. Furthermore, the NRS, MMT, MBI, and the active ROM scores were numerically improved. Conclusions : In this case, a single patient with polyneuritis was treated using a combination of Korean and Western medical methods. Although this study provides useful insight into treatment methods, further studies are required to determine the treatment effects of Korean medicine, specifically Chuna manual therapy, in patients with polyneuritis.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.13 no.2
• /
• pp.85-95
• /
• 2018

Objectives : The aim of the present study was to report the clinical progress of a patient who underwent surgical treatment of necrotizing fasciitis. Methods : During the admission period, The patient was treated with acupuncture, cupping, Korean Medicine, Chuna therapy every day and observed by Numeric Rating Scale(NRS), Pain Disability Index(PDI), Beck Depression Inventory(BDI), and assessment about range of motion(ROM) and manual muscle test(MMT) for hip & knee joint. Results : After treated by using above treatment, NRS, PDI, BDI and ROM, MMT were improved. Conclusions : Korean Medical treatment are estimated to be good for patients after surgical treatment of necrotizing fasciitis. But more cases are required to prove the effectiveness of the treatment.

• Korean Journal of Veterinary Research
• /
• v.62 no.1
• /
• pp.8.1-8.6
• /
• 2022

The aim of this prospective study was to investigate the effects of focal spot size of X-ray tube on sharpness of clinical radiographic images of dogs and cats. Radiographic images of 24 stifle joints, 15 carpi, 18 lumbar spines, 61 thoraxes, and 47 abdomens of 102 dogs and 4 cats were obtained in the present study, using 2 X-ray tubes with nominal focal spots of 2.0 mm and 0.6 mm, respectively. The sharpness of specific anatomical structures in all the images of 5 projections was assessed. The radiographic sharpness of various anatomical structures of lumbar spine and cortex of stifle with fine focal spot was increased significantly compared with broad focal spot images. In addition, the blurred motion was significantly higher in the fine focal spot images of thorax. In conclusion, our study suggests that a selective use of fine foci for imaging of lumbar spine or cortex of stifle enhanced radiographic sharpness.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.3
• /
• pp.145-152
• /
• 2020

In this study, we evaluated spinal stability based on the change in the thoracolumbar fixation segment using finite element analysis (FEA). To accomplish this, a finite element (FE) model of a normal thoracolumbar spine (T10-L4), including intervertebral discs (IVD), ligaments, and facet joints, was constructed, and the material properties reported in previous studies were implemented. However, L1 was assumed as the lesion site, and three types of posterior fixation, namely, L1-L2, T12-L2, and T12-L1-L2, were implemented in the thoracolumbar FE model. In addition, the loading conditions for flexion, extension, lateral bending, and axial rotation were adopted. Through the series FEA, the deformation, equivalent stress, range of motion, and moment on the pedicle screws, vertebrae, and IVD were calculated, and the spinal stability was evaluated based on the FEA results.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.10 no.2
• /
• pp.37-49
• /
• 2015

Objectives : The purpose of this study is to show the effectiveness of Chuna Cranio-Sacral Therapy for remaining pain and muscle strength decrease after herniated intervertebral disc surgery. Methods : Two patients with Failed Back Surgery Syndrome(FBSS) were hospitalized and treated by Korean medical treatments with Chuna Cranio-Sacral Therapy. The Range of Motion(ROM) of the lumbar spine and Manual Muscle Test(MMT) were adopted to measure the resulting motor recovery after treatment. And the Numerical Rating Scale(NRS) was adopted to measure changes of pain level. Two patients both had Chuna Cranio-Sacral Therapy category III disorder with short right leg. We applied category III blocking technique everyday for 20 minutes with Korean medical treatments. Results : In both cases, the range of motions were improved and the pain level decreased. And in case 1, muscle strength also showed improvements. Conclusions : We suggest Chuna Cranio-Sacral Therapy is effective for pain decrease and motor recovery of FBSS patients. Further studies are needed to set up an Korean medical protocol for FBSS.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.1
• /
• pp.43-49
• /
• 2015

Objective : $Dynesys^{(R)}$ is one of the pedicle-based dynamic lumbar stabilization systems and good clinical outcome has been reported. However, the cylindrical spacer between the heads of the screws undergoes deformation during assembly of the system. The pre-strain probably change the angle of instrumented spine with time and oblique-shaped spacer may reduce the pre-strain. We analyzed patients with single-level stabilization with $Dynesys^{(R)}$ and simulated oblique-shaped spacer with finite element (FE) model analysis. Methods : Consecutive 14 patients, who underwent surgery for single-level lumbar spinal stenosis and were followed-up more than 24 months (M : F=6 : 8; age, $58.7{\pm}8.0$ years), were analyzed. Lumbar lordosis and segmental angle at the index level were compared between preoperation and postoperative month 24. The von Mises stresses on the obliquely-cut spacer ($5^{\circ}$, $10^{\circ}$, $15^{\circ}$, $20^{\circ}$, $25^{\circ}$, and $30^{\circ}$) were calculated under the compressive force of 400 N and 10 Nm of moment with validated FE model of the L4-5 spinal motion segment with segmental angle of $16^{\circ}$. Results : Lumbar lordosis was not changed, while segmental angle was changed significantly from $-8.1{\pm}7.2^{\circ}$ to $-5.9{\pm}6.7^{\circ}$ (p<0.01) at postoperative month 24. The maximum von Mises stresses were markedly decreased with increased angle of the spacer up to $20^{\circ}$. The stress on the spacer was uneven with cylindrical spacer but it became even with the $15^{\circ}$ oblique spacer. Conclusion : The decreased segmental lordosis may be partially related to the pre-strain of Dynesys. Further clinical and biomechanical studies are required for relevant use of the system.

• The Journal of Korean Physical Therapy
• /
• v.23 no.5
• /
• pp.15-21
• /
• 2011

Purpose: The purpose of this study was to describe the influence of respiration on the segmental motion of the lumbar spine in the lying position. Methods: Twelve healthy females without a history of low back pain participated. Lumbosacral lordosis, intervertebral body angles, intervertebral body displacements, and anterior heights of the intervertebral disc of the lumbar spine were measured at inspiration, expiration and forced expiration in the supine and prone positions via fluoroscopy. Results: The results of lumbar kinematic analysis in the supine position according to respiration pattern were as follows. The L4/5 intervertebral body angle was significantly higher at forced expiration than at expiration (p<0.05). The L3/4 anterior height of the intervertebral disc was significantly higher at expiration than at forced inspiration and the L5/S1 anterior height of the intervertebral disc was significantly higher at inspiration than at forced expiration (p<0.05). There were no significant differences in the intervertebral body displacements and lumbosacral lordosis in the supine position (p>0.05). The results of lumbar kinematic analysis in the prone position according to respiration pattern were as follows. The L5/S1 anterior height of the intervertebral disc was significantly higher at inspiration than at forced expiration (p<0.05). However, there was no significant difference in the intervertebral body angle, the intervertebral body displacements, and the lumbosacral lordosis (p>0.05). Conclusion: These findings suggested that respiration can affect the intervertebral body angle and anterior height of the intervertebral disc in some segments. The results from this study serve as a step in the development of guidelines for lumbar kinematic analysis for lumbar breathing training.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.22 no.2
• /
• pp.9-14
• /
• 2016

Purpose: Many people are suffering from Low back pain due to HIVD and muscular problems, lack of joint functions on lumbar spine. In this study we compared the change of the herniation index, Oswestry LBP disability index (OLDI), visual analog scale (VAS), lumbar flexion range of motion (ROM) between the pre-experiment and after 4 weeks treatment by maitland manual therapy. Method: we selected and managed both the 15 people. They are $46.80{\pm}15.46$ years old people with HIVD and Stenosis. We treated for the people with HIVD and Stenosis by manual therapy(maitland manipulation method) during 4 weeks. And then we compared with pre-experiment and after 12 weeks through measuring the herniation index change by using computor themograpy (CT), LBP OLDI, VAS, lumbar flexion ROM. Results: The changes in the herniation index, Oswestry lumbar Disability Index, VAS, lumbar flexion ROM between the pre-experiment and after 4 weeks treatment by maitland manual therapy, there was a statistically significant difference. Although there was a significant difference after 4 weeks in OLDI, VAS, lumbar flexion ROM. But disc herniation index was no significant difference. Conclusion: Manual therapy is very effective for Lumbago due to the HIVD and spinap stenosis patients. OLDI, VAS and lumbar flexion ROM were increased. But disc herniation index was no significant difference. We suggest the combination treatment between manual exercise and spinal traction.