• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.104-105
• /
• 2007

In this study, characteristics of silver ink-jet printing were investigated under various substrate treatments such as substrate heating, hydrophobic coating, and ultraviolet(UV)/ozone soaking. Fluorocarbon(FC) film was spin-coated on the polyimide (PI) film substrate to obtain a hydrophobic surface. Although hydrophobicity of the FC film could reduce the diameter of the printed droplets, the singlet images printed on the FC film surface showed irregularities in the pattern size and the position of the printed droplet along with droplet merging phenomenon. The proposed UV/ozone soaking of the FC film improved the uniformity of the pattern size and the droplet position after printing and substrate heating was very effective way in preventing droplet merging. By heating of the substrate after UV/ozone soaking of the coated FC film, silver conductive lines of 78-116 ${\mu}m$ line were successfully printed at low substrate temperatures of $40^{\circ}C$.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.603-608
• /
• 2019

In this study, the multilayered thin films of (Ba,Sr)TiO3/K(Ta,Nb)O3 were fabricated by the sol-gel and spin coating methods, and their structural and electrical properties were investigated. The specimen showed polycrystalline X-ray diffraction (XRD) characteristics with a tetragonal structure. The average grain size and film thickness for one coating were about 30~40nm and 60nm, respectively. The phase transition temperature of specimen was lower than 10 ℃. The dielectric constant and loss at 20 ℃ of the specimen coated six times were 1,231 and 0.69, respectively. The rate of change in dielectric constant at an applied direct current (DC) voltage of the six times coated thin films was 17.3%/V. The electrocaloric effect was the highest around the temperature at which the remanent polarization rapidly changed. When an electric field of 660kV/cm was applied to the triply coated thin films, the highest electrocaloric property of 4.41 ℃ was observed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.113-116
• /
• 2008

The active layer thickness and curing condition dependent performance of an organic thin film transistor (OTFT) with inkjetted organic semiconductor (OSC) layer is studied The best performance of the OTFT was found when the thickness of ose was ~120 nm cured at $60^{\circ}C$. The performance enhancement of the OTFT with inkjetted OSC layer was discussed by comparing the OTFT with spin-coated ose layer.

• 한국인쇄학회지
• /
• 제14권1호
• /
• pp.1-15
• /
• 1996

In this paper, the preparation of lead zirconium titanate(PZT) thin film by sol-gel processing was descried. Thin film coated with thickness of 4${\mu}{\textrm}{m}$ on the stainless steel substrates using the multiple spin-coating process. The crystalline phases of PZT powder and film were investigated by X-ray diffraction pattern and PZT thin film has perovskite structure over 600 C annealing temperature. Corona charging characteristics of the ferroelectric PZT thin film at 600 C were investigated by electrophotographic measurement. A difference in the charging characteristics between positive and negative corona charging was found. The charge acceptance depended in the polarity of corona and the poling of film. According to the D-E hysteresis measurment, PZT thin film can be poled by corona charging without use of top electrode. The remnant polarization in the PZT thin film is generally in the order of 48$\mu$C/$\textrm{cm}^2$. From this results, the ferroelectric PZT thin film will be possible to apply for the add-on type imaging formation.

• 대한기계학회논문집B
• /
• 제39권5호
• /
• pp.463-469
• /
• 2015

산화그래핀 소재를 합성하여 투명한 박막 코팅기술을 개발하고 특성을 평가하였다. 스핀과 스프레이 공정을 동시에 이용하여 산화그래핀을 유리 기판에 균일하게 박막코팅을 하였다. 균일하게 산화그래핀을 스핀-스프레이 공정을 이용하여 박막코팅을 하기 위하여 유리기판을 amine-functional group으로 표면개질을 하였다. 또한, 스핀-스프레이 공정을 이용하여 산화그래핀 박막을 4층까지 적층을 하였고 86% 이상의 투명도를 확보하였다. 이와 같은 합성된 산화그래핀 박막소재의 스핀-스프레이 코팅 기술은 다양한 전자제품들의 display를 대면적으로 코팅할 수 있을 것으로 기대되어진다.

• Journal of Electrochemical Science and Technology
• /
• 제11권2호
• /
• pp.180-186
• /
• 2020

In this work, a metal-ligand solution (Cu-EDTA) was prepared based on the molecular precursor method and the solution was spin-coated onto 3D printed flexible photosensitive resin sheets. After being processed by microwave, a laser with a wavelength of 355 nm was utilized to scan the spin-coated sheets and then the sheets were immersed in an electroless copper plating solution to deposit copper wires. With the help of microwave processing, the adhesion between copper wires and substrate was improved which should result from the increase of roughness, decrease of contact angle and the consistent orientation of coated film according to the results of 3D profilometer and SEM. XPS results showed that copper seeds formed after laser scanning. Using the 3D printed flexible sheets as cathode and galvanized iron as anode, electrochemical machining was conducted.

• 한국결정성장학회지
• /
• 제11권6호
• /
• pp.252-258
• /
• 2001

($Ba_{0.7}Sr_{0.3})TiO_3$박막을 ITO-coated glass 기판위에 spin-coating법으로 제조하였다. 제조된 용액을 초음파 bath 내에서 초음파 처리하여 균일화를 촉진시킨 후 박막을 제조하여 초음파 처리하지 않은 용액으로 제조한 박막과의 비교를 통하여 초음파 효과를 알아보았다. 용액의 초음파 처리로 박막의 결정화 온도를 다소 낮추었으며 박막의 표면이 보다 균일하고 치밀화되었고 거칠기도 8.4nm에서 5.6nm로 더 낮아졌다. 그리고 박막의 투광성 및 전기적 특성 또한 용액의 초음파 처리로 인하여 향상되었다.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.123-126
• /
• 2010

$Cu_2O$ nanoparticles-based films are fabricated by spin-coating on glass substrates and their optoelectronic characteristics are investigated in this study. The $Cu_2O$ films are nearly all-transparent as high as 98% in a wavelength range from 400 nm to 900 nm and three exciton peaks associated with the sublevels in the conduction band are observed at the wavelengths shorter than 400 nm in the absorption spectrum. Under the illumination of the 325 nm wavelength light, the photocurrent efficiency of the $Cu_2O$ film is $1.8\times10^5 {\mu}A/W$ at a voltage of 2.5 V in air.

• 한국안광학회지
• /
• 제12권1호
• /
• pp.17-22
• /
• 2007

Ti-나프텐산염과 금속을 출발원료로 사용하고, 스핀코팅-열분해법을 이용하여 실리카 유리위에 박막을 제조하였다. 도포된 박막은 $500^{\circ}C$ 공기에서 10min동안 열처리하였다. 이를 5회 코팅한 박막은 마지막으로 공기에서 $600^{\circ}C$에서 30min으로 하였다. 박막의 특성을 분석하기 위하여 X-선 회절 분석, 전자현미경, UV스펙트럼을 이용하여 분석하였다. 밴드갭에서 가장 큰 장파장 쪽으로 이동은 Fe을 도핑한 $TiO_2$ 박막이었다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.43-46
• /
• 2012

Organic solar cell devices were fabricated using poly[9-(1-octylnonyl)-9H-carbazole-2.7-diyl]-2.5-thiophenediyl-2.1.3-benzothiadiazole-4.7-diyl-2.5-thiophenediyl] PCDTBT/ [6,6]-phenyl $C_{71}$ butyric acid methyl ester (PC71BM) active layer deposited by spin coating. Moreover, the relationship between solar cell performance and buffer layer thickness was investigated by spin coating speed and AFM imaging of the buffer layer surface. The performance of the organic solar cell with spin-coated active layer was then evaluated, and the power conversion efficiency of the solar cell was determined to be > 5%.