• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.199-203
• /
• 1998

$Pb(Zr, Ti)O_3$ (Pb:Zr:Ti=1:0.52:0.48) thin films were prepared on single crystal MgO(100) substrates by dipping-pyrolysis process using a solution of constituent metal naphthenates as starting materials. The solution was spin-coated onto substrate and the precursor films were pyrolyzed at $200^{\circ}C$ in air or at $200^{\circ}C$ in argon for 1, 2, 5 and 24h, followed by final heat treatment at $750^{\circ}C$. For all the films, highly (h00)/(00l)-oriented Pb$Pb(Zr, Ti)O_3$ thin films with smooth surfaces and crack-free were obtained, whereas thin film pyrolyzed in air for 24 h exhibited polycrystalline character. According to the pole-figure analysis, epitaxy of the product films was found to depend on pyrolysis atmosphere.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1590-1592
• /
• 2002

In this work the electrical characteristics of organic TFTs using organic insulator and flexible polyester substrate have been investigated. Pentacene and PVP(polyvinylphenol) are used as an active semiconducting layer and dielectric layer respectively. Pentacene was thermally evaporated in vacuum at a pressure of about $1{\times}10^{-6}$ Torr and at a deposition rate of $0.5{\AA}$/sec, and PVP was spin-coated. Aluminium and gold were used for gate and source/drain electrodes. 0.1mm thick flexible polyester substrate was used instead of glass or silicon wafer.

• Journal of the Optical Society of Korea
• /
• v.13 no.4
• /
• pp.478-483
• /
• 2009

An optical sheet with a cone array is designed, simulated, and fabricated in order to substitute the dual crossed prism sheets in the edge-type LCD backlight. The optimum structure of cone textures that is compatible with the dual crossed prism sheets was obtained by simulating the backlight installed with the cone array optical sheet. A SU-8 photoresist films of thickness $30{\sim}50{\mu}m$ were spin-coated on a polyethylene terephtalate film (PET), and the cone texture array was formed by using the diffuse lithography that employed a photomask with circular patterns and an optical diffuser.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.258-261
• /
• 2009

In this work we present a process to fabricate lowtemperature polysilicon (LTPS) TFTs on polyimide (PI) layers, spin-coated on Si-wafer used as rigid carrier. This process has been then used to fabricate elementary circuits as well as circuits for sensor applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1582-1585
• /
• 2009

The effects of bias stress on spin-coated zinc tin oxide (ZTO) transistors are investigated. Applying a positive bias stress results in the displacement of the transfer curves in the positive direction without changing the field effect mobility or the subthreshold behavior. Device instability appears to be a consequence of the charging and discharging of temporal trap states at the interface and in the zinc tin oxide channel region.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1754-1756
• /
• 2000

Organic semiconductors based on fused-ring polycyclic aromatic hydrocarbon have great potential to be utilized as an active layer for electronic and optoelectronic devices. In this study, pentacene thin films and electrode materials were deposited by Organic Molecular Beam Deposition(OMBD) and vacuum evaporation respectively. For the gate dielectric, polyamic acid was spin-coated and cured into polyimide at 350$^{\circ}C$. Electrical characteristics of the devices were investigated, where the channel length and width was 50${\mu}m$ and 5mm. It was found that field effect mobility was 0.012$cm^{2}/Vs$, and on/off current ratio was $10^5$.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.271-274
• /
• 2011

Screen-printed source and drain electrodes were used for a spin-coated and inkjet-processed zinc-tin oxide (ZTO) TFTs for the first time. Source and drain were silver nanoparticles. Channel length was patterned using screen printing technology. Different silver nanoinks and process parameters were tested to find optimal source and drain contacts Relatively good electrical properties of a screen-printed inkjet-processed oxide TFT were obtained as follows; a mobility of 1.20 $cm^2$/Vs, an on-off current ratio of $10^6$, a Vth of 5.4 V and a subthreshold swing of 1.5 V/dec.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.2
• /
• pp.151-157
• /
• 2009

This paper reports the resistance change of conductive carbon nanotube (CNT) thin-films according to the temperature variation. Resistance of conductive CNT thin-films intrinsically has good thermal sensitivity, but shows environmental dependency. In order to reduce environmental effects, we spin-coated polydimethylsiloxane (PDMS) on the conductive CNT thin-films. We observed that conductive CNT thin-films with a PDMS encapsulation layer showed little environmental dependency, but more linear and stable temperature dependencies. If proper encapsulation is provided, conductive CNT thin-films can be used for temperature sensor applications.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.567-572
• /
• 2013

In many electro-devices, the vacuum process is used as the manufacturing process. However, the vacuum process has a problem, it is difficult to apply to a continuous process such as a R2R(roll to roll) printing process. In this paper, we propose an ESD (electro static deposition) printing process has been used to apply an organic solar cell of thin film forming. ESD is a method of liquid atomization by electrical forces, an electrostatic atomizer sprays micro-drops from the solution injected into the capillary with electrostatic force generated by electric potential of about several tens kV. The organic solar cell based on a P3HT/PCBM active layer and a PEDOT:PSS electron blocking layer prepared from ESD method shows solar-to-electrical conversion efficiency of 1.42% at AM 1.5G 1sun light illumination, while 1.86% efficiency is observed when the ESD deposition of P3HT/PCBM is performed on a spin-coated PEDOT:PSS layer.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1245-1249
• /
• 2015

This study investigated the reflection spectra of wrinkled metal/polymer multilayers. A wavy surface was self-assembled by annealing an aluminum-coated poly(methyl metacrylate) layer on a silicon substrate. The total and diffuse reflectance characteristics of the sample with additional metal coatings(aluminum or silver) were evaluated in the visible wavelength(400~800 nm) using a spectrophotometer. The results showed that the wrinkled surface enhanced the diffuse reflectance up to 40~50% in the lower-wavelength range, demonstrating its potential for applications to optical thin-film devices.