• 한국안광학회지
• /
• 제13권3호
• /
• pp.73-77
• /
• 2008

목적: 본 논문은 저온열처리로 비결정 또는 결정 ZnO 박막의 UV emission 가능하다는 것이다. 방법: 화학적 용액법을 이용하여 소다-라임-실리카 유리 위에 100, 150, 200, 250 및 $300^{\circ}C$로 열처리하여 비정질 및 나노 결정질 ZnO 박막을 제조하였으며, 박막의 성장 특성 및 광학적 특성을 X-선 회절 분석법, 자외선-가시광선-근적외선 분광법 및 발광분석법을 통하여 분석하였다. 결과: $100^{\circ}C{\sim}200^{\circ}C$에서 60분간 열처리된 박막은 비정질 특성을 나타내고 있었으며, $250^{\circ}C$ 및 $300^{\circ}C$로 열처리된 박막에서는 ZnO 결정상이 나타났다. 비정질 ZnO 박막의 PL분석에 의하면 매우 강한 Near-band-edge emission이 나타났으며, Green emission은 거의 검출되지 않았다. 결론: 앞으로는 저온에서 ZnO 광전자소자를 쉽게 제조할 수 있을 것이다.

• 한국자기학회지
• /
• 제5권3호
• /
• pp.203-209
• /
• 1995

보자력이 다른 NiFe와 Co를 자성층으로 하고 Cu를 사잇층으로 하는 $glass\[Cu_{x\AA}\NiFe_{50\AA}\Cu_{x\AA}\Co_{50\AA}](X;\=\;8,\;10,\;14,\;18,\;22,\;26,\;28,\;38,\;48,\;58\;\AA)$ 다층박막을 D.C magnetron sputtering 방법으로 제작하여 사잇층인 Cu 두께, 적층횟수 및 열처리가 자기저항비에 미치는 영향과 자기 곡선의 변화에 대해 연구하였다. 자기저항 측정시 인가 자장은 전류의 방향과 수평, 수직하게 인가하여 측정하였다. Cu 두께가 대략 $10\;\AA$에서 최대 자기저항비를 보이고 있으며, 두께가 증가함에 따라 진동하는 경향은 나타냈다. 적층횟수에 따라서는 적층횟수가 증가함에 따라 증가하였으며, 단지 4층의 경우에는 오히려 3층 보다 감소하였다. 열처리의 경우 온도의 증가에 따라 증가하다가 $250^{\circ}C$ 이상에서는 다시 감소하는 것을 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2895-2900
• /
• 2014

We fabricated quantum dot-sensitized solar cells (QDSSCs) using cadmium sulfide (CdS) and cadmium telluride (CdTe) quantum dots (QDs) as sensitizers. A spin coated $TiO_2$ nanoparticle (NP) film on tin-doped indium oxide glass and sputtered Au on fluorine-doped tin oxide glass were used as photo-anode and counter electrode, respectively. CdS QDs were deposited onto the mesoporous $TiO_2$ layer by a successive ionic layer adsorption and reaction method. Pre-synthesized CdTe QDs were deposited onto a layer of CdS QDs using a direct adsorption technique. CdS/CdTe QDSSCs had high light harvesting ability compared with CdS or CdTe QDSSCs. QDSSCs incorporating single-walled carbon nanotubes (SWNTs), sprayed onto the substrate before deposition of the next layer or mixed with $TiO_2$ NPs, mostly exhibited enhanced photo cell efficiency compared with the pristine cell. In particular, a maximum rate increase of 24% was obtained with the solar cell containing a $TiO_2$ layer mixed with SWNTs.

• Journal of Magnetics
• /
• 제13권1호
• /
• pp.19-22
• /
• 2008

ZnO nanotips, grown on c-$Al_2O_3$ and quartz, were implanted variously with 200 keV Fe or Mn ions to a dose level of $5{\times}10^{16}cm^{-2}$. The magnetic properties of these samples were measured using a superconducting quantum interference device (SQUID) magnetometer. Fe-implanted ZnO nanotips grown on c-$Al_2O_3$ showed a coercive field width of 209 Oe and a remanent field of 12% of the saturation magnetization ($2.3{\times}10^{-5}emu$) at 300K for a sample annealed at $700^{\circ}C$ for 20 minutes. The field-cooled and the zero-field-cooled magnetization measurements also showed evidence of ferromagnetism in this sample with an estimated Curie temperature of around 350 K. The Mn-implanted ZnO nanotips grown on c-$Al_2O_3$ showed superparamagnetism resulting from the dominance of a spin-glass phase. The ZnO nanotips grown on quartz and implanted with Fe or Mn showed signs of ferromagnetism, but neither was consistent.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.400-400
• /
• 2007

In this study, we investigated liquid crystal (LC) alignment with ion beam (IB) that non contact alignment technique on polyimide and electro-optical characteristics of twisted nematic (TN)-liquid crystal display (LCD) on the polyimide under various ion beam angles. In this experiment, polyimide layer was coated on glass by spin-coating and Voltage-transmittance(VT) and response time characteristics of the TN cell were measured by a LCD evaluation system. The good characteristics of the nematic liquid crystal (NLC) alignment with the ion beam exposured polyimide surface was observed. In addition, it can be achieved the good EO properties, and residual DC property of the ion beam aligned TN cell on polyimide surface.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.240-240
• /
• 2006

Thin films of poly(vinyl cinnamate) (PVCi) were prepared on indium tin oxide (ITO) glass and silicon substrates by conventional spin coating and subsequent drying process. The thicknesses of the films ranged 50-120 nm. The films' surface was treated by rubbing, ultraviolet exposure or their combinations in various ways with changing rubbing strength and exposure dose. These films were examined in detail in the aspects of surface morphology and chain orientation. Further, the anchoring and orientation behaviors of liquid crystals on the film surfaces were investigated. All the results will be discussed in detail.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.100-105
• /
• 1994

대표적인 연자성재료 중의 하나로 알려진 Ni-Fe 합금박막을 고주파 마그네트론 스파터링 장치를 사용하여 제작했다. 박막두께가 Ni-Fe 합금박막의 특성에 미치는 영향을 고찰하기 위하여, 스파터링 시간을 변화시켜 주면서 제작된 시료에 대해 강자성 공명 실험에서 얻은 미분형 공명흡 수곡선을 분석하여, 유효자화 $M_{eff}$, 교환상수(exchange stiffness constant) A, 그리고 분 광학적 분리인자 g를 구했다. 모든 시료에 대해 유효자화는 거의 일정한 값을 보였으나, 교환상수 는 시료의 두께가 증가함에 따라 비교적 큰 증가폭을 나타냈다. 분광학적 분리인자는 시료의 두께 가 증가함에 따라 약간 증가하는 경향성을 보였는데, 이는 스핀자기모멘트에 대한 궤도자기모멘트 의 상대적인 기여가 증가했기 때문인 것으로 생각된다.

• 한국자기학회지
• /
• 제10권2호
• /
• pp.62-66
• /
• 2000

비자성사이층 Cu 두께(30 $\AA$, 35 $\AA$, 40 $\AA$)를 달리한 glass(7059)/N $i_{81}$$Fe_{19}$(70 $\AA$)/Co(10 $\AA$)/Cu(t $\AA$)/Co(15 $\AA$)/N $i_{81}$$Fe_{19}$(35 $\AA$)N $i_{25}$M $n_{75}$(250 $\AA$)Ta(50 $\AA$) 스핀밸브박막(spin valve film; SVF) 을 dc 스퍼터링으로 제작하였다 이 시편을 진공 열처리 한 후 자유자성층의 상호결합세기(interlayer coupling field; $H_{inf}$ )와 보자력(coercivity; $H_{sf}$ )에 대한 열처리 순환횟수 및 비자성층 두께 의존성에 관련한 자기저항특성을 조사했다. Cu 두께가 35 $\AA$인 SVF의 경우에 교환결합세기(exchange coupling field; $H_{ex}$)가 620 Oe, 보자력( $H_{c}$)이 280 Oe 및 자기저항(magnetoresistance; MR)비가 2.5%를 보였다. $H_{inf}$ 와 $H_{cf}$ 는 모든 SVF가 열처리 순환 횟수에 따라 증가하는 경향을 보이다가 일정한 값으로 안정화되며 Cu 35 $\AA$인 경우는 열처리 순환 횟수 15회 이후에 각각 120 Oe 및 75 Oe를 유지한다. $H_{inf}$ 및 $H_{cf}$ 가 열처리 순환횟수 증가에 따라 증가하는 것은 열처리 효과에 의해 Cu층과 Co층의 계면섞임 증대에 의한 유효한 Cu층 두께 감소에 기인한다. Cu가 적정둘레 35 $\AA$ 보다 더 얇아지거나 두꺼워지면 계면섞임에 의한 효과는 각각 더 증대하거나 둔화되는 것으로 분석된다.으로 분석된다..

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권4호
• /
• pp.137-141
• /
• 2004

In this paper, a thermopneumatic PMDS (polydimethlysiloxane) micropump with nozzle/diffuser elements is presented. The micropump is composed of nozzle/diffuser elements as dynamic valves, an actuator consisting of a circular PDMS diaphragm and a Cr/Au heater on a glass substrate. Four PDMS layers are used for fabrication of an actuator chamber, actuator diaphragm by a spin coating process, spacer layer, and nozzle/diffuser by the SU-8 molding process. The radius and thickness of the actuator diaphragm is 2 mm and 30 ${\mu}{\textrm}{m}$, respectively. The length and the conical angle of the nozzle/diffuser elements are 3.5 mm and 20$^{\circ}$, respectively. The actuator diaphragm is driven by the air cavity pressure variation caused by ohmic heating and natural cooling. The flow rate of the micropump in the frequency domain is measured for various duty cycles of the square wave input voltage. When the square wave input voltage of 5 V DC is applied to the heater, the maximum flow rate of the micropump is 44.6 ${mu}ell$/min at 100 Hz with a duty ratio of 80% under the zero pressure difference.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.221-221
• /
• 2012

Small-molecule organic photovoltaic cells have recently attracted growing attention due to their potential for the low-cost fabrication of flexible and lightweight solar modules. The PVP/Ag nanoparticles were synthesized by the reaction of poly vinylpyrrolidone (PVP) and silver nitrate at $150^{\circ}C$. In the reaction, the size of the nanoparticles was controlled by relative mole fractions between PVP and Ag. The PVP/Ag nanoparticles with various sizes were then spin coated on the patterned ITO glass prior to the deposition of the PEDOT:PSS hole transport layer. The scattering of the incident light caused by these incorporated nanoparticles resulted in an increase in the path length of the light through the active layer and hence the enhancement of the light absorption. This scattering effect increased as the size of the nanoparticles increased, but it was offset by the decrease in total transmittance caused by the non-transparent nanoparticles. As a result, the maximum power conversion efficiency, 0.96% which was the value enhanced by 14% compared to the cell without incorporation of nanoparticles, was obtained when the mole fraction of PVP:Ag was 24:1 and the size of the nanoparticles was 20~40 nm.