• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1440-1442
• /
• 2005

We have fabricated vertical type organic thin film transistors (OTFTs) using organic semiconductor materials such as F16CuPc, NTCDA, PTCDI C-8 and C60. The layers of OTFT were fabricated by vacuum evaporation technique and spin casting method onto the Indium Tin Oxide (ITO) coated glass. I-V characteristics and on-off ratios of the fabricated OTFTs were investigated. In addition, we have fabricated light emitting transistor using MEH-PPV and then investigated EL electroluminescent properties.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.3
• /
• pp.237-241
• /
• 1998

In this study, PLZT stock solutions around x/65/35 (x=6~11) ferroelectric region were prepared by Sol-Gel method and deposited on ITO-glass by spin-coating method. The thin films were annealed by RTA(rapid thermal annealing). The variations of crystallographic structure of the thin films were observed using XRD and hysteresis curves, dielectric characteristics, and optical transmittances were measured in order to investigate the characteristics of the thin films. The thin films were crystallized at $750^{\circ}C$ for 5 min by RTA. Relative dielectric constant and optical transmittance increased with increasing La content, Ec and Pr were higher for thin films than for bulk materials.

• Journal of the Korean Ceramic Society
• /
• v.29 no.3
• /
• pp.216-222
• /
• 1992

PLZT thin films were prepared using sol-gel spin coating. The films mainly consisted of perovskite phase when heat treated at 600$^{\circ}C$ and in O2 or air atmosphere for 2 hours after 7 coating cycles. Cracks were formed when smaller than after 9 coating cycles. When ITO interlayer existed between Corning 7059 glass substrate and the film, cracks were not formed after 9 coating cycles, but cracks were formed after 11 coating cycles because of large volume change of the film contracting on the substrate during the heat treatment. In the observation of microstructure, the thin films have perovskite phase of about 2 $\mu\textrm{m}$ grain size and pyrochlore phase of 100∼200${\AA}$ grain size.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.65-65
• /
• 2008

본 논문의 목표는 유기태양전지의 재료적 특성중 반사율을 측정하여 가장 투명한 oranic solar cell을 제조하기 위한 기초자료를 도출하였다. 먼저 유기태양전지 재료중 일부인 PEDOT,PSS,MEH-PPV,P3HT를 수십 $\AA$ ~ 수백 $\AA$ 두께로 glass 기판위에 spin코팅하여 UV-VIS를 통해 파장열 반사 특성을 분석하였다. 또한, 동일한 시료를 사용하여 FESEM을 통한 표면 Morphology를 확인하였다. 최종적으로 가장 transparent 시료를 이용하여 oranic solar cell을 제작하여 efficiency와 reflectance characteristic를 측정하였다.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.649-654
• /
• 2005

This paper presents fabrication and drive test of a peristaltic PDMS micropump actuated by the thermopneumatic force. The micropump consists of the three peristaltic-type actuator chambers with microheaters on the glass substrate and a microchannel connecting the chambers and the inlet/outlet port. The micropump is fabricated by the spin-coating process, the two-step curing process, the JSR (negative PR) molding process, and etc. The diameter and the thickness of the actuator diaphragm are 2.5 mm and $30{\mu}m$, respectively. The meniscus motion in the capillary tube is observed with a video camera and the flow rate of the micro pump is calculated through the frame analysis of the recorded video data. The maximum flow rate of the micropump is about $0.36\;{\mu}L/sec$ at 2 Hz for the zero hydraulic pressure difference when the 3-phase input voltage is 20 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.479-482
• /
• 2002

Benzylideneacetophenones are known as chalcones[1]. The chalcone has been known to be a photo-isomerizable and photo-dimerizable chromophore. The chalcone derivatives were prepared by base-catalyzed condensation of aldehydes and acetophenones, which were substituted with various alkyl chains. The synthesized chalcone was introduced into the t-BOC protected diamine through William synthesis reaction. Photocrosslinkable polyimide was prepared via one-step imidization reaction of DOCDA (5-(2,5-dioxotetrahydro furyl}-3-methyl-3-cyclohexene-1,2-dicarboxylic anhydride) and the chalcone introduced diamine using isoquinoline (5 wt%) in m-cresol. The polyimide solutions were spin-coated onto the quartz, silicone wafer and glass substrates and the obtained thin films were irradiated obliquely with linearly polarized UV light.

• Journal of the Microelectronics and Packaging Society
• /
• v.2 no.1
• /
• pp.35-48
• /
• 1995

마이크로회로내에서 티탄산바륨 중 바륨의 일부가 납으로 치환됨에 따른 전기적 특 성의 변화를 확인하기 위하여 MOD(금속유기화합물 분해법)공정에 의 barum 2-ethylhexanoate, barium neodecanoate, lead 2-ethylhexanoate 및 titanium dimethoxy 야 -2-ethylhexanoate 와 같은 MOC(금속 유기화합물) 들을 합성하고 공통 용매에 대한 용해 도를 시험하였다. 그 결과 barium 2-ethylhexanoate 만 p-xylene에 대한 용해도가 낮았으며 그 외의 다른 MOC들은 모두 p-xylene 단일 용매에 매우 잘 용해되었다. 바륨의 일부가 납 으로 치환된 티탄산 납바륨 박막은 MOC 혼합용액을 ITO/glass, Pt/SiO2/Si 및 Pt/Ti/SiO2/Si 웨이퍼 기판 위에 spin coating 하고 소성하여 얻었다. 이와 같이 얻어진 박막 의 전기적 특성을 측정하고 그 결과를 비교 고찰하였다.

• Journal of Magnetics
• /
• v.15 no.1
• /
• pp.17-20
• /
• 2010

The relationship between ferromagnet anisotropic magnetization and the antiferromagnet atomic spin configuration was investigated for various angles of the uniaxial deposition magnetic field of the FeMn layer in the Corning glass/Ta(5nm)/NiFe(7nm)/FeMn(25nm)/Ta(5nm) multilayer that was prepared by the ion beam sputter deposition. The exchange bias field ($H_{ex}$) obtained from the measurement of the easy-axis MR loop decreased to 40 Oe at the deposition field angle of $45^{\circ}$, and to 0 Oe at the angle of $90^{\circ}$. When the difference between the uniaxial axis between the ferromagnet NiFe and the antiferromagnet FeMn was $90^{\circ}$, the strong antiferromagnetic dipole moment of FeMn caused the weak ferromagnetic dipole moment of NiFe to rotate in the interface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.431-432
• /
• 2008

We have investigated low temperature sintering characteristics of organic Ag complex. Organic Ag complex was coated on the glass substrate by spin coating method. The coated Ag complex was sintered in an air atmosphere. The sintering temperature was varied from 100 to $300^{\circ}C$ and sintering time was varied from 1 to 4 min. The thickness of the coated film was significantly decreased as the film was sintered at the temperature between 110 and $120^{\circ}C$. The sintered Ag film at temperature higher than $115^{\circ}C$ shows very low sheet resistance less than 1 ${\Omega}{/\square}$.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.350-356
• /
• 2015

The effects of the zinc oxide (ZnO) preparing process on the performance of inverted organic photovoltaic cells (OPVs) were explored. The morphology and size of ZnO nanoparticles were controlled, leading to more efficient charge collection from device and higher electron mobility compared with nanospheres. Nanosized ZnO particles were synthesized by using zinc acetate dihydrate and potassium hydroxide in methanol. Also, water was added into the reaction medium to control the morphology of ZnO nanocrystals from spherical particles to rods, and $NH_4OH$ was used to prevent the gelation of dispersion. Solution-processed ZnO thin films were deposited onto the ITO/glass substrate by using spin coating process and then ZnO films were used as an electron transport layer in inverted organic photovoltaic cells. The analyses were carried out by using TEM, FE-SEM, AFM, DLS, UV-Vis spectroscopy, current density-voltage characteristics and solar simulator.