• Journal of Audiology & Otology
• /
• v.23 no.4
• /
• pp.181-186
• /
• 2019

Background and Objectives: This study compared the perception of mono-syllabic and bisyllabic words in Tamil by young normal hearing adults in the presence of multi-talker speech babble at two signal-to-noise ratios (SNRs). Further for this comparison, a speech perception in noise test was constructed using existing mono-syllabic and bi-syllabic word lists in Tamil. Subjects and Methods: A total of 30 participants with normal hearing in the age range of 18 to 25 years participated in the study. Speech-in-noise test in Tamil (SPIN-T) constructed using mono-syllabic and bi-syllabic words in Tamil was used as stimuli. The stimuli were presented in the background of multi-talker speech babble at two SNRs (0 dB and +10 dB SNR). Results: The effect of noise on SPIN-T varied with SNR. All the participants performed better at +10 dB SNR, the higher of the two SNRs considered. Additionally, at +10 dB SNR performance did not vary significantly for neither mono-syllabic or bi-syllabic words. However, a significant difference existed at 0 dB SNR. Conclusions: The current study indicated that higher SNR leads to better performance. In addition, bi-syllabic words were identified with minimal errors compared to mono-syllabic words. Spectral cues were the most affected in the presence of noise leading to more of place of articulation errors for both mono-syllabic and bi-syllabic words.

• Korean Journal of Audiology
• /
• v.23 no.4
• /
• pp.181-186
• /
• 2019

Background and Objectives: This study compared the perception of mono-syllabic and bisyllabic words in Tamil by young normal hearing adults in the presence of multi-talker speech babble at two signal-to-noise ratios (SNRs). Further for this comparison, a speech perception in noise test was constructed using existing mono-syllabic and bi-syllabic word lists in Tamil. Subjects and Methods: A total of 30 participants with normal hearing in the age range of 18 to 25 years participated in the study. Speech-in-noise test in Tamil (SPIN-T) constructed using mono-syllabic and bi-syllabic words in Tamil was used as stimuli. The stimuli were presented in the background of multi-talker speech babble at two SNRs (0 dB and +10 dB SNR). Results: The effect of noise on SPIN-T varied with SNR. All the participants performed better at +10 dB SNR, the higher of the two SNRs considered. Additionally, at +10 dB SNR performance did not vary significantly for neither mono-syllabic or bi-syllabic words. However, a significant difference existed at 0 dB SNR. Conclusions: The current study indicated that higher SNR leads to better performance. In addition, bi-syllabic words were identified with minimal errors compared to mono-syllabic words. Spectral cues were the most affected in the presence of noise leading to more of place of articulation errors for both mono-syllabic and bi-syllabic words.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.521-526
• /
• 1997

The Spin Tester(High Speed Balancing and Overspeed Test Facility), which is designed for the quality control of turbine, generator, and rotors was supposed to be constructed with the use of Steel Fiber Reinforced Concrete(SERC) for reducing the risk of accident while operation. However, it was very existence of fiber concrete due to there are two major concern in the SFRC work: one is existence of fiber ball due to inhomogeneous mixing, the other is the segregation of the concrete materials. To avoid these possible problems, the S/a was controlled about 55% to reduce the segregation and the high range AE water reducing agent was used to maintain the slump over the value of 18cm. With these careful consideratons, the SFRC work was done successfully by only using regular equipments like pump car and vibrator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4313-4319
• /
• 2013

The purpose of our study is to shorten the scanning time and minimize the inconveniences of the patients in acquisition of the black blood images using the signal void effect in the fast spin echo technique while keeping the diagnostic value of the test. Thirty-two consecutive patients who underwent black blood MR imaging were examed with additional double inversion recovery (DIR) sequence and the conventional fast spin echo (FSE) sequence. Signal to Noise Ratio (SNR) and Contrast to Noise Ratio (CNR) of the internal carotid arteries' lumen were compared in T1 and T2 weighted images to determine whether there are differences between the two techniques for depiction of the signal void effect inside the vessel wall. The FSE images showed lower SNR values than the DIR images in both of the T1 and T2 weighted images (11.49% and 13.66% respectively). While the CNR values were higher in the FSE images than in the DIR images in both of the T1 and T2 weighted images (8.69% and 7.55% respectively).There was no significant difference between the two techniques for either of the SNR or CNR (p>0.05, p>0.05 respectively). The DIR and the FSE images demonstrated almost identical imaging patterns. Therefore, it is anticipated that the use of FSE technique in acquisition of the black blood imaging could reduce the inconveniences of the patients during the scanning and minimize exam time while keeping the diagnostic value of the test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.359-362
• /
• 2010

BBU for 155mm projectile has been verified its stable performance and quality reliability through the production for several years. We have researched substitution test for flight test of BBU. Through this research, we expect the verification of quality stability and other collateral effect like the cost reduction and delivery on time.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.836-839
• /
• 2003

In this paper, we briefly introduce the test bench and test method of RWA micro-vibration. TAMAM RWA (Reaction Wheel Assembly) micro-vibration was measured on a KISTLER dynamic plate which can measure time signals of three orthogonal forces and torques simultaneously up to 400Hz, and test data was analyzed. Measured data were evaluated with respect to the wheel spin rate and the static/dynamic unbalances were estimated from the extracted first harmonic component. The estimated static and dynamic unbalances were 0.79gㆍcm and 17.4gㆍ$\textrm{cm}^2$ respectively. The resonance mode and two rocking modes were observed as a results of its frequency analysis. Several higher order harmonic components were observed, which comes from its rotor shape as well as the wheel bearing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.169-172
• /
• 2005

공정시 플라스틱 기판의 변형을 방지하기 위해 PC(Polycarbonate) 기판을 약 12시간 동안 pre-annealing시킨 다음 SiN(silicon nitride)와 PI(Poly-imide)를 각각 Sputter와 Spin-Coater를 이용하여 Coating하였다. 완성된 PC 기판위에 Themal Evaporation으로 Calsium을 증착한 뒤 Al을 올렸다. Calsium 증착 된면에 삼성 코닝의 글래스를 UV resin으로 부착 시킨 다음 상온에서 투습률을 측정하였다. 측정 간격은 12시간으로 하였으며 Calsium Test 의 정확도 향상을 위해 CCD Camera로 측정하여 컴퓨터로 분석하였다. 그래픽 저장 파일은 저장시 이미지 손실을 방지하기 위해 Bitmap방식을 그대로 사용 하였으며 정확도 향상을 위한 분석 프로그램은 MicroSoft 사의 Visual C++로 작성하였다. 화상 처리 면적은 컴퓨터 시스템의 처리 속도를 감안하여 70*70 으로 하였다.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.71-78
• /
• 2005

The purpose of this research was to conduct an analysis on the factors that determine the distance at the time of target swing based on the use of late hitting of outstanding college golfers to verify the difference between late hitting and the distance that target increases in regular swing and the distance. Then, this research conducts an analysis on the correlation between club head velocity, ball velocity, launch angle, back spin, meet ratio and distance that become kinematics variables at the time of target swing. To attain the above mentioned purpose, 25 outstanding college players with average experience and handicap of 6 years and 5, respectively, were targeted Comparative analysis on two swing that target increase in regular and the distance was conducted by used driver. When it pertained to two types of swing. analysis system comprised of an analytical software called the Science Eye of the Bridgestone and peripheries was used to define the relationship between variables of club head velocity, ball velocity, launch angle, back spin, meet ratio that become kinematics variables. As for the method of processing data pertaining to the factors that determine the distance, differences of distance by the type of swing was verified by using independent T-test that leveraged SPSS 120 statistics program. Moreover, level of correlation between variables that contribute to the increase in distance through relation of correlation, and analysis of tendencies was conducted to analyze tendency of non-distance to increase in accordance to the increase of each variable. Key results produced through this experiment are as follows: 1. Artificial late hitting for increased non-distance that targets skilled players had effect on increased the distance(p<. 05). 2 The drive distance is correlated with each measured variable that is positive correlation to ball velocity, club head velocity, meet ratio and relation of back spin and launch angle are negative correlation. ball velocity and club head velocity are very high correlated with drive distance(p<.01), back spin and distance are negative correlation(p<.01). 3. Among each measured variable increasing the club velocity is the most contribution, and ball velocity and meet ratio and the increasing launch angle and back spin is negative effect for increasing distance.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.362-368
• /
• 1998

The magnetic properties, thermal stability and anti-corrosion properties of $Cr_86Al_14$ spin valves multilayers were studied. It was found that the magnetic properties of $Cr_86Al_14$ spin valves depend on the thickness of antiferromagnetic, ferromagnetic and non-ferromagnetic layers. Exchange coupled field ($H_{ex}$) and magnetoresistance ratio (%) showed the largest value of 20 Oe, 2 % in $glass/Cr_{86}Al_{14}(600 $\AA$)/Ni_{81}Fe_{19}(50$\AA$)/Cu(40 $\AA$)/Ni_{81}Fe_{19}(40 $\AA$)$ spin valves. The $H_{ex}$ MR ratios (%) of CrAl and FeMn spin valves were decreased with increasing annealing temperatures and were lost at 150 $^{\circ}C$, 250 $^{\circ}C$ respectively. Based on these result, it was elucidated that CrAl is more thermally stable than FeMn. It was also shown that there was no change of $H_{ex}$ MR ratios in CrAl, while FeMn was changed and lost 15 days later in corrosion resistance test under 35 $^{\circ}C$, 90 % humidity condition. FeMn was found to be pitted and peeled off 15 days later by SEM micrographic analysis.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1719-1721
• /
• 1996

This paper describes the thermally stimulated current(TSC) of PAAS spin coated film and the electrical properties of pre TSC measurement and after TSC test specimens. The TSC measurement were performed from room temperature to about $280^{\circ}C$ and the temperature was increased by $5^{\circ}C/min$ automatically. It shows that two peaks of TSC are observed at about $50^{\circ}C$ and about $160^{\circ}C$. Result of this measurement indicate that one peak; $50^{\circ}C$ is from alkyl group; other peak at $160^{\circ}C$ is due to alkyl and C-O group of PAAS. Addition to larger peak at about $160^{\circ}C$ is due to dipolemoment of PAAS film. This result is proved by DSC measurement of PAAS film. The electrical properties of pre and after TSC were measured by currant-voltage(l-V) characteristics. The current-voltage characteristics after TSC specimens are increased the conductivity. The electrical properties of pre-after TSC measurement specimen is in the middle of imidization of PAAS. Because of this result a thermal imidization was performed at $300^{\circ}C$ for 1 hour.