• Korean Journal of Remote Sensing
• /
• v.27 no.3
• /
• pp.369-377
• /
• 2011

Since well-calibrated satellite data is critical for their applications, calibration and validation of COMS science data was one of the key activities during the IOT. COMS MI radiometric calibration process was divided into two phases according to the out-gassing of the sensor: calibrations of the visible (VI) and infrared (IR) channels. Different from the VIS calibration, the calibration steps for the IR channels followed additional processes to secure their radiometric performances. Primary calibration steps of the IR were scan mirror emissivity correction, midnight effect compensation, slope averaging and 1/f noise compensation after a nominal calibration. First, the scan mirror emissivity correction was conducted to compensate the variability of the scan mirror emissivity driven by the coating material on the scan mirror. Second, the midnight effect correction was performed to remove unreasonable high spikes of the slope values caused by the excessive radiative sources during the local midnight. After these steps, the residual (difference between the previous slope and the given slope) was filtered by a smoothing routine to eliminate the remnant random noises. The 1/f noise compensation was also carried out to filter out the lower frequency noises caused from the electronics in the Imager. With through calibration processes during the entire IOT period, the calibrated IR data showed excellent performances.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.123-127
• /
• 1988

Even though grass species are one of major importance in livestock industry, the response of intergeneric hybridization of Lolium and Festuca and interspecific hybridization of Lolium m.X Lolium p. to Korean climatic condition has not been adequately documented. This reasearch was conducted to examine the growth characteristics and dry matter yield of Festulolium, cv. Felopa and C-Stamm N 66 and hybrid ryegrass, cv. Maja and Tetilelite. 1. The early growth of Italian ryegrass was better than that of hybrid ryegrass and Festulolium. The plant length and helght of Italian ryegrass were longerltaller than those of hybrid ryegrass and Festulolium, but the number of tillers of Italian ryegrass was less than that of hybrid ryegrass and Festulolium. 2. Festulolium and hybrid ryegrass were more tolerant than Italian xyegrass to winter killing, 70-80% of tillers was survived. 3. After wintering, early spring growth of hybrid ryegrass and Festulolium were better than that of Italian ryegrass. Dry matter yield of hybrid ryegrass and Festulolium were more than that of Italian ryegrass. 4. Spikes of hybrid ryegrass and Festulolium (C-Stamm N66) were more than those of Italian ryegrass. Seed yield per $m^2$ of hybrid ryegrass and Italian ryegrass were almost same, but that of Festulolium was lower.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2035-2037
• /
• 1999

This paper describes an ASM(All Solid-state Modulator) pulsed power generator for non-thermal plasma applications. The proposed generator can produce 20kV, 500A, 100ns pulses at repetition rates up to 10kHz, and it is composed of 30 series connections of power circuit card assembly which contains paralleled MOSFETs, MOSFET drivers, energy storage capacitors and specially designed 1:1 pulse transformer. Higher pulse voltages and currents can easily be obtained by increasing the numbers of series and parallel connections of power circuit card and MOSFETs, respectively. Component layouts are optimized to minimize the leakage inductance and the voltage spikes across switching devices. Especially it put emphasis on the over-current protection (including short circuit) for the reliable operation in real situations. Experimental results show that the proposed pulser is very efficient in air pollution control application and could be useful for other applications such as synthesis of nanosize powders and non-thermal food processing.

• Korean Journal of Acupuncture
• /
• v.23 no.2
• /
• pp.105-111
• /
• 2006

Objectives: We investigated the effect of electroacupuncture on epileptic rat model and its underlying mechanisms on suppression of the epilepsy. Methods: It was used pentylenetetrazol $(35{\sim}40\;mg/kg.\;i.p)$ induced epileptic rat model and square wave electrical stimulations (5 mA, 5, 40 or 80 Hz frequency) was applied to acupoints on 'Dazhui' and 'Taichong' for 30min. Results: Electroacupuncture suppressed spikes and slow waves of EEG due to the epileptic condition. Out of electroacupuncture, a high frequency of 80Hz had a better effect for suppress epileptic EEG wave. Conclusions: Electroacupuncture can markedly reduce the excitability of cerebral cortex and strengthen the inhibitory process, checking epilepsy wave. Some intrathalamic nuclei have a promoting or inhibiting effect on epileptic EEG wave. This experimental study we are proposed to Electro-acupuncture can suppression epileptic rat model and it's scientific mechanisms.

• Macromolecular Research
• /
• v.14 no.1
• /
• pp.38-44
• /
• 2006

Vacuum deposited copper phthalocyanine (CuPc) was placed as a thin interlayer between indium tin oxide (ITO) electrode and a hole transporting layer (HTL) in a multi-layered, organic, light-emitting diode (OLEOs). The well-stacked CuPc layer increased the stability and efficiency of the devices. Thermal annealing after CuPc deposition and magnetic field treatment during CuPc deposition were performed to obtain a stacked-CuPc layer; the former increased the stacking density of the CuPc molecules and the alignment of the CuPc film. Thermal annealing at about 100$^{circ}C$ increased the current flow through the CuPc layer by over 25$\%$. Surface roughness decreased from 4.12 to 3.65 nm and spikes were lowered at the film surface as well. However, magnetic field treatment during deposition was less effective than thermal treatment. Eventually, a higher luminescence at a given voltage was obtained when a thermally-annealed CuPc layer was placed in the present, multi-layered, ITO/CuPc/NPD/Alq3/LiF/AI devices. Thermal annealing at about 100$^{circ}C$ for 3 h produced the most efficient, multi-layered EL devices in the present study.

• Journal of Welding and Joining
• /
• v.20 no.3
• /
• pp.109-115
• /
• 2002

In this study high power Nd:YAG laser welding of structural steel was investigated. For the test steel blocks of $50{\times}50{\times}200mm$ were cut and machined, and bead-on-plate weld was made on the machined surface. Argon, nitrogen, helium, dry air or mixed gases were used to find the effect of shielding conditions on the bead formation. Results demonstrated that there were Fe I rich region and Fe II rich region in the laser induced plasma column based on the spectral analysis with S-2000 field spectrometer The Fe I region was located at the root of the column near keyhole opening. On the other hand, Fe II region was found at the middle of the plasma column. In the Nd:YAG laser welding, Fe I region emitted continuum which had peak value at wave length of around 710nm, and Fe II region had the peak at 580nm. In the welding of steel by $CO_2$ laser, however, no continuum was observed. There showed two groups of strong spikes in the $CO_2$ laser welding; the first group was displayed at the wave band of 450-560nm. This spike group emitted stronger intensity of light and sharper peaks than those group at 680-800nm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.363-369
• /
• 2004

We propose, for the first time to our knowledge, a novel gain-clamping method for EDFA in WDM add/drop networks by introducing a disturbance observer technique. The control input signal for gain-clamping is composed of a nominal control signal and an additional control signal of compensating the gain fluctuations caused by channel add/drops. Based on disturbance observer technique, we designed the additional control signal such that it has the compensating information of estimated disturbance resulted from channel add/drops. The circuit for generating additional control signal can easily be implemented by using simple electronic devices. We proved the superiority of the new technique over the previous ones by showing simulation results of minimized dips and spikes that appear in power profile of EDFA in the process of channel add/drops.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.133-138
• /
• 2014

Packet arrival-delay variation, so-called 'jitter' is one of the main factors that degrade the quality of voice in mobile devices at the Voice over Internet Protocol (VoIP). To resolve this issue, a playout scheduling based on adaptive jitter estimation for enhancing VoIP speech quality is proposed. The proposed algorithm copes with the effect of transmission jitter by expanding or compressing each packet according to the predicted network delay and variations. Additionally, the active network jitter estimation incorporates rapid detection of delay spikes and reacts to changes in network conditions. The experimental results have shown that the proposed algorithm delivers high voice quality in unstable network environment.

• Earthquakes and Structures
• /
• v.3 no.5
• /
• pp.675-694
• /
• 2012

The 2008 Iwate-Miyagi Nairiku earthquake ($M_w$ 6.9, $M_{jma}$ 7.2) occurred on 14 June 2008 in Japan. The amplification and asymmetric waveform of the vertical acceleration at the ground surface recorded by accelerometers at station IWTH25, situated 3 km from the source, were remarkable in two ways. First, the vertical acceleration was extremely large (PGA = 38.66 $m/s^2$ for the vertical component, PGA = 42.78 $m/s^2$ for the sum of the three components). Second, an unusual asymmetric waveform, which is too far above the zero acceleration axis, as well as large upward spikes were observed. Using a multidegree-of-freedom (MDF) system consisting of a one-dimensional continuum subjected to vertical acceleration recorded at a depth of 260 m below ground level, the present paper clarifies numerically that these singular phenomena in the surface vertical acceleration records occurred as a result of the jumping and collision of a layer in vertical motion. We herein propose a new mechanism for such jumping and collision of ground layers. The unexpected extensive landslides that occurred in the area around the epicenter are believed to have been produced by such jumping under the influence of vertical acceleration.

• Journal of Environmental Science International
• /
• v.11 no.7
• /
• pp.663-667
• /
• 2002

The aerodynamic resistance($R_a$) to vertical transfer in the surface boundary layer can be formulated in terms of the friction velocity, height of observation, vertical heat flux and surface roughness. Unlike previous studies which focused on the role of $R_c$, present study perform additional tests using a variety of $R_a$ formulae. Several $R_a$ formulations available in the literature, suitable for unstable conditions, were tested for their influence on the dry deposition velocity. The canopy resistance($R_c$) determines the shape of the diurnal pattern, while a small amplitude diurnal cycle in $V_d$ was attributed to the aerodynamic resistance. The aerodynamic resistance is the major contributor to the formation of spikes in nighttime and $R_a$ is relatively important at night because the canopy resistance is smaller. All formulations show similar diurnal cycle and yield good agreement with the observations. Although present $V_d$ formulations are suitable for numerical air qualify models, the research must continue for further improvements in resistance parametrizations.