• Korean Journal of Radiology
• /
• v.23 no.1
• /
• pp.42-51
• /
• 2022

Objective: This study aimed to investigate the direction of tissue contraction after microwave ablation in ex vivo bovine liver models. Materials and Methods: Ablation procedures were conducted in a total of 90 sites in ex vivo bovine liver models, including the surface (n = 60) and parenchyma (n = 30), to examine the direction of contraction of the tissue in the peripheral and central regions from the microwave antenna. Three commercially available 2.45-GHz microwave systems (Emprint, Neuwave, and Surblate) were used. For surface ablation, the lengths of two overlapped square markers were measured after 2.5- and 5-minutes ablations (n = 10 ablations for each system for each ablation time). For parenchyma ablation, seven predetermined distances between the markers were measured on the cutting plane after 5- and 10-minutes ablations (n = 5 ablations for each system for each ablation time). The contraction in the radial and longitudinal directions and the sphericity index (SI) of the ablation zones were compared between the three systems using analysis of variance. Results: In the surface ablation experiment, the mean longitudinal contraction ratio and SI from a 5-minutes ablation using the Emprint, Neuwave, and Surblate systems were 28.92% and 1.04, 20.10% and 0.53, and 24.90% and 0.45, respectively (p < 0.001). A positive correlation between longitudinal contraction and SI was noted, and a similar radial contraction was observed. In the parenchyma ablation experiment, the mean longitudinal contraction ratio and SI from a 10-minutes ablation using the three pieces of equipment were 38.60% and 1.06, 32.45% and 0.61, and 28.50% and 0.50, respectively (p < 0.001). There was a significant difference in the longitudinal contraction properties, whereas there was no significant difference in the radial contraction properties. Conclusion: The degree of longitudinal contraction showed significant differences depending on the microwave ablation equipment, which may affect the SI of the ablation zone.

• Journal of Korean Academy of Nursing
• /
• v.43 no.5
• /
• pp.587-594
• /
• 2013

Purpose: The purpose of this study is to provide researchers with a simplified approach to undertaking exploratory factor analysis for the assessment of construct validity. Methods: All articles published in 2010, 2011, and 2012 in Journal of Korean Academy of Nursing were reviewed and other relevant books and articles were chosen for the review. Results: In this paper, the following were discussed: preliminary analysis process of exploratory factor analysis to examine the sample size, distribution of measured variables, correlation coefficient, and results of KMO measure and Bartlett's test of sphericity. In addition, other areas to be considered in using factor analysis are discussed, including determination of the number of factors, the choice of rotation method or extraction method of the factor structure, and the interpretation of the factor loadings and explained variance. Conclusion: Content validity is the degree to which elements of an assessment instrument are relevant to and representative of the targeted construct for a particular assessment purpose. This measurement is difficult and challenging and takes a lot of time. Factor analysis is considered one of the strongest approaches to establishing construct validity and is the most commonly used method for establishing construct validity measured by an instrument.

• Journal of Biosystems Engineering
• /
• v.24 no.4
• /
• pp.365-372
• /
• 1999

Physical characteristics of stem (ile., length and diameter) and branch, and detachment force of mature and immature fruits of 12 species of the Lycium chinese Mill at a cultivar were determined. The number of stems and branches were counted after the first and second pruning of each plant. Length and diameter of the stem were average of 113.5 cm and 9.5 mm for 12 species of the Lycium chinese Mill, respectively. Average number of stem and number of branch after the first and second pruning in each plant were 5, 30, and 61, respectively. Diameter of major and minor axis of the fruit was average of 13.8mm and 8.3mm, respectively, and the sphericity of fruits was average of 0.7 for 12 species of Lycium chinese Mill. Detachment force of mature and immature fruits was average of 1 N and 2.7 N, respectively, for 12 species of the Lycium chinese Mill. The maximum and minimum detachment force of the mature fruits was 2.06 N and 0.39 N, respectively, and that of the immature fruits was 3.72 N and 1.27 N, respectively. The force-weight ratio showed a decreasing trend as the weight of fruit increasing for all samples.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.16-21
• /
• 2017

An experimental study has been carried out to improve the performance of a commercial abrasive blasting nozzle, by simply redesigning the nozzle's inner contour. The analytical 1-D code, that can evaluate both the frictional effects on the nozzle inner wall and the sphericity effects of the particle, is utilized to calculate the dynamics of the particle inside the nozzle. The analytical results are compared to the experimental ones, that were obtained from images of the particle streaklines downstream from the nozzle exit. It is noted that the particle velocity at the redesigned nozzle exit increases as compared to the original commercial nozzle.

• Journal of Powder Materials
• /
• v.16 no.4
• /
• pp.254-261
• /
• 2009

In this study, we investigated the unit process parameters in spherical $UO_2$ kernel preparation. Nearly perfect spherical $UO_3$ microspheres were obtained from the 0.6M of U-concentration in the broth solution, and the microstructure of the $UO_2$ kernel appeared the good results in the calcining, reducing, and sintering processes. For good sphericity, high density, suitable microstructure, and no-crack final $UO_2$ microspheres, the temperature control range in calcination process was $300{\sim}450^{\circ}C$, and the microstructure, the pore structure, and the density of $UO_2$ kernel could be controlled in this temperature range. Also, the concentration changes of the ageing solution in aging step were not effective factor in the gelation of the liquid droplets, but the temperature change of the ageing solution was very sensitive for the final ADU gel particles.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.5
• /
• pp.7-20
• /
• 2019

Purpose - This study provides appropriate procedures for EFA to help researchers conduct empirical studies by using PLS-SEM. Research design, data, and methodology - This study addresses the absolute and relative sample size criteria, sampling adequacy, factor extraction models, factor rotation methods, the criterion for the number of factors to retain, interpretation of results, and reporting information. Results - The factor analysis procedure for PLS-SEM consists of the following five stages. First, it is important to look at whether both the Bartlett test of sphericity and the KMO MSA meet the qualitative criteria. Second, PAF is a better choice of methodology. Third, an oblique technique is a suitable method for PLS-SEM. Fourth, a combined approach is strongly recommended to factor retention. PA should be used at the onset. Next, it is recommended using the K1 criterion. In addition, it is necessary to extract factors that increase the total variance explanatory power through the PVA-FS. Finally, it is appropriate to select an item with a factor loading into 0.5 or higher and a communality of 0.5. Conclusions - It is expected that the accurate factor analysis processed for PLS-SEM as previously presented will help us extract more precise factors of the structural model.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.2
• /
• pp.71-78
• /
• 2017

The sidereal day of a Global Positioning System (GPS) satellite was intended to equal one half of a sidereal day of the Earth. However, the sidereal day of GPS satellites has become unequal to one half of a sidereal day of the Earth. This is fundamentally caused by the non-sphericity of the Earth and the gravity of the Moon. The difference between sidereal days of GPS satellites and the Earth is known as a sidereal shift. The details surrounding sidereal shifts and their origins have yet to be fully understood. We calculated the periodicity of sidereal shifts for GPS satellites using broadcast ephemeris data. To conduct a periodic analysis of the sidereal shift, we employ the Lomb-Scargle periodogram method. It shows that the orbit periods of GPS satellites have small-amplitude perturbations with a 13.6-day period. In addition, we compare the GPS satellite orbit periods with the periodicity of geomagnetic indices and the solar wind parameters to identify the cause of the perturbations. Our results suggest that the solar wind stream might also affect the 13.6-day period of the sidereal shifts.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.192-197
• /
• 2020

Foreign students in South Korea face important challenges when they try to maintain their health. As a measure of their motivation to actively build skills for overcoming those challenges, we evaluated the 10-item Consumer Health Activation Index (CHAI), testing its feasibility, dimensionality, and reliability. There were no missing data, there was no floor effect, and for the total scores the ceiling effect was trivial (< 2%). Results of the Kaiser-Meyer-Olkin test and Bartlett's test of sphericity indicated that the data were suitable for the detection of structure by factor analysis. The results of parallel analysis and the shape of the scree plot supported a two-factor solution. One factor had 3 items concerning "my doctor" and the other factor had the 7 remaining items. Reliability was high for the 10-item CHAI (alpha = 0.856), for the 3-item subscale (alpha = 0.838), and for the 7-item subscale (alpha = 0.857). Reliability could not be improved by deletion of any items. Use of the CHAI to gather data from these foreign students is feasible, and reliable results can be obtained whether one uses the total score from all 10 items or scores from the proposed 7-item and 3-item subscales.

• The Korean Journal of Community Living Science
• /
• v.25 no.3
• /
• pp.383-388
• /
• 2014

This study was examined the physical characteristics (geometry, yield strength, thousand-seeds weight, true density, and moisture content) required for mechanization-related technologies such as (harvesting, washing, transport, and drying). Large differences in the size and shape of boxthorn berries(Jangmyeong, Bullo, Chungmyeong, and Hokwang) are used to analyze these physical properties. The average diameter, volume, surface area, and sphericity rate are calculated using long and short diameters of the boxthorn berry according to its variety. Hokwang has the largest measured surface area, and Bullo, the smallest. Average yield strength is 1.78 kPa and the mechanical pressure of soft boxthorn berries is not more than 1 kPa. Bullo has the highest true density. The optimum drying time for the measurement of moisture content is 4 hours at the drying temperature of $100^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.6
• /
• pp.784-790
• /
• 2014

In this study we aimed to evaluate the reduction in dimensionality of 20 linear type traits and more final score in 14,943 Holstein cows in Brazil using factor analysis, and indicate their relationship with longevity and 305 d first lactation milk production. Low partial correlations (-0.19 to 0.38), the medium to high Kaiser sampling mean (0.79) and the significance of the Bartlett sphericity test (p<0.001), indicated correlations between type traits and the suitability of these data for a factor analysis, after the elimination of seven traits. Two factors had autovalues greater than one. The first included width and height of posterior udder, udder texture, udder cleft, loin strength, bone quality and final score. The second included stature, top line, chest width, body depth, fore udder attachment, angularity and final score. The linear regression of the factors on several measures of longevity and 305 d milk production showed that selection considering only the first factor should lead to improvements in longevity and 305 milk production.