• 한국안광학회지
• /
• 제16권3호
• /
• pp.255-264
• /
• 2011

목적: 인공눈물, 렌즈용 다목적 용액, 화장품, 근골격계 용제에 널리 사용되고 있는 히알루론산(hyaluronic acid, HA)의 콘택트렌즈의 습윤성과 착용감에 대한 효과를 알아보기 위해 HA가 첨가된 콘택트렌즈(+HA)와 HA가 첨가되지 않은 렌즈(-HA)를 임상 평가하여 비교하였다. 방법: 안질환이 없는 대학생 28명을 대상으로 하여 4주 동안 우안에는 HA가 첨가된 렌즈(+HA, With HA)를 좌안에는 HA가 첨가되지 않은 렌즈(-HA, Without HA)를 착용하여, 좌안을 대조군으로 우안을 비교하였다. 이 때, 렌즈 도수는 등가구면으로 처방하고, 자동굴절검사기를 이용해 덧댐굴절검사를 한 뒤 2주와 4주 동안 렌즈 착용 후 눈물검사, 전안부 검사, 피팅 용이성 평가, 표면 습윤성 검사, 설문조사를 시행하였다. 결과: 히알루론산이 첨가된 렌즈(+HA)가 -HA 렌즈보다 우수한 습윤성을 보였으며, 눈물량은 +HA 렌즈 착용자에서는 4주 동안 차이가 크지 않았지만, -HA 렌즈 착용자에서는 4주가 되면서 눈물량이 줄어드는 결과를 보였다. +HA와 -HA 렌즈 착용자의 충혈정도는 차이를 보이지 않았으며, 렌즈 피팅은 +HA 렌즈에서 용이한 것으로 나타났다. 설문조사 결과에서 착용감, 습윤감, 세척의 용이성과 건조감은 +HA 렌즈가 -HA 렌즈에 비해 우수한 결과를 보였으나, 충혈정도와 렌즈 취급성은 차이가 적은 것으로 나타났다. 결론: 히알루론산이 첨가된 소프트콘택트렌즈(+HA)는 HA가 첨가되지 않은 소프트콘택트렌즈(-HA)에 비해 렌즈착용에 따른 표면 습윤성을 높임으로써 착용감을 증진시키는 것으로 사료된다.

• 한국광학회지
• /
• 제26권2호
• /
• pp.88-97
• /
• 2015

전방위 광학계는 360도의 방위각과 지평선 위와 아래의 수직화각에 대한 상을 동시에 결상이 가능한 광학계이다. 본 논문에서는 제작을 쉽게 하면서 크기가 작아지도록 하기 위해서 가운데에 구멍이 뚫려있는 옵스큐레이션(obscuration)을 갖는 구면거울 1장과 평면거울 1장으로 이루어진 거울계 및 이 거울계에서 반사하여 구면거울의 옵스큐레이션을 통과한 시야각 범위 안의 광을 결상하는 구면렌즈 3개와 하나의 구면 이중렌즈로 구성된 결상렌즈계를 사용하는 가시광용 반사굴절식 전방위 광학계를 설계하고 제작하여 전방위 영상을 실제로 결상하였다. 그리고 자동차 앞, 뒷번호판의 영상을 보고 이 전방위 광학계의 통과 공간주파수를 측정하고, ISO 12233 차트의 영상으로부터 전방위 광학계의 수직화각을 측정하여 광학계의 성능을 평가하였다. 이 결과 전방위 광학계의 수직화각은 $+53^{\circ}{\sim}-17^{\circ}$이며, 방위각은 $360^{\circ}$이고, 3 m 거리에서 자동차 앞번호판의 숫자를 구별할 수 있었는데, 이는 135 lp/mm의 통과 공간주파수에 해당한다.

• 한국안광학회지
• /
• 제20권4호
• /
• pp.455-462
• /
• 2015

목적: 친수성 콘택트렌즈 정점굴절력 측정 방식중 하나인 wet cell 측정법을 활용한 국산화 측정 홀더와 프로그램 개발에 관한 연구를 위해 현재 사용되어지고 있는 Poster wet cell 홀더와 함수율별 굴절력의 측정값을 비교 분석하였다. 방법: 안경원에서 사용 중인 기존 제품과 새롭게 개발된 국산제품에 식염수를 채워 넣고 소프트콘택트렌즈의 굴절력을 측정하였다. 실험에 사용한 친수성 콘택트렌즈는 안경원에서 많이 사용되고 있는 국내산 렌즈를 사용하였으며, 함수율별과, 구면굴절력별로 분류하여 각각 실험하였다. 결과: wet cell 방식으로 콘택트렌즈 굴절력 측정 시 새롭게 개발한 홀더의 경우 자동렌즈미터를 사용하여 굴절력을 측정한 결과 -3.00 D에서 함수율 38%는 -3.01 D, 함수율 45%는 -3.00 D, 함수율 58%는 -2.98 D로 측정되었으며, Poster wet cell 홀더를 사용하여 렌즈를 측정한 결과 -3.00 D에서 함수율 38%는 -3.60 D, 45%는 -3.06 D, 58%는 -2.46 D로 각각 측정되었다. 결론 : 고함수율에서 굴절력 측정값은 wet cell 방식의 두 홀더 모두 낮게 나타났으며, 새롭게 개발된 홀더와 프로그램을 통한 자동렌즈미터의 측정값이 기존의 Poster soft contact lens wet cell 측정방식에 비해 더 정확한 굴절력 측정 결과를 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제20권9호
• /
• pp.808-811
• /
• 2007

Aspheric glass lens have recently been used in camera phone module because they are more effective than spherical ones. In this paper, the grinding condition of the tungsten carbide molding core has been found after applying DOE to the development of the aspheric glass lens for the 3 Megapixel and 2.5x camera-phone module. Also, the ultra precision grinding process was investigated under this condition by experiment. Re-Ir coating was applied on the ground surface of the tungsten carbide molding core. The influence of Re-Ir coating on the form accuracy and surface roughness of molding core was compared and evaluated. The form accuracy and surface roughness of the molding core were improved by application of Re-Ir coating on the surface of the tungsten carbide molding core.

• 대한수학회지
• /
• 제35권2호
• /
• pp.331-340
• /
• 1998

We define the spherical non-commutative torus $L_{\omega}$/ as the crossed product obtained by an iteration of l crossed products by actions of, the first action on C( $S^{2n＋l}$). Assume the fibres are isomorphic to the tensor product of a completely irrational non-commutative torus $A_{p}$ with a matrix algebra $M_{m}$ ( ) (m > 1). We prove that $L_{\omega}$/ $M_{p}$ (C) is not isomorphic to C(Prim( $L_{\omega}$/)) $A_{p}$ $M_{mp}$ (C), and that the tensor product of $L_{\omega}$/ with a UHF-algebra $M_{p{\infty}}$ of type $p^{\infty}$ is isomorphic to C(Prim( $L_{\omega}$/)) $A_{p}$ $M_{m}$ (C) $M_{p{\infty}}$ if and only if the set of prime factors of m is a subset of the set of prime factors of p. Furthermore, it is shown that the tensor product of $L_{\omega}$/, with the C＊-algebra K(H) of compact operators on a separable Hilbert space H is not isomorphic to C(Prim( $L_{\omega}$/)) $A_{p}$ $M_{m}$ (C) K(H) if Prim( $L_{\omega}$/) is homeomorphic to $L^{k}$ (n)$\times$ $T^{l'}$ for k and l' non-negative integers (k > 1), where $L^{k}$ (n) is the lens space.$T^{l'}$ for k and l' non-negative integers (k > 1), where $L^{k}$ (n) is the lens space.e.

• 한국안광학회지
• /
• 제16권1호
• /
• pp.61-64
• /
• 2011

목적: 홍채의 편심이 눈에 미치는 영향을 고려한 실안과 보다 유사한 GRIN 형태의 수정체를 갖는 정밀모형안을 설계하고자 하였다. 방법: 기존에 설계되어진 Radial GRIN과 Spherical GRIN 형태의 수정체를 갖는 정밀모형안을 이용하여 홍채의 위치를 코 방향으로 0.5 mm 편심시켜 실제의 눈과 동일하도록 하였다. 광선 추적과 설계는 Optical Research Associates(ORA)의 Code V 프로그램을 이용하였다. 결과: 설계한 모형안은 홍채 편심에 따라 실안과 비교하여 감소된 수차를 보여주고 있던 것을, 실안과 유사하도록 수차보정을 하여 정밀모형안을 설계하였다. 결론: 안광학계는 홍채가 편심된 회전비대칭계인 점을 고려하여, 홍채의 편심이 눈에 미치는 영향을 고려한 실안과 보다 유사한 GRIN 형태의 수정체를 갖는 정밀모형안을 설계하였다.

• Journal of the Optical Society of Korea
• /
• 제19권4호
• /
• pp.403-408
• /
• 2015

To evaluate the effects of spherical aberration (SA) correction on optical quality in pseudophakic eyes, we simulated the optical quality of the human eye by computation of the modulation transfer function (MTF). We reviewed the medical records of patients who underwent cataract surgery in Asan Medical Center, retrospectively. A Zywave aberrometer was used to measure optical aberrations at 1-12 postoperative months in patients with AR40e intraocular lens implants. The MTF was calculated for a 5 mm pupil from measured wavefront aberrations. The area under the MTF curve (aMTF) was analyzed and the maximal aMTF was calculated while changing the SA ($-0.2{\sim}+0.2{\mu}m$) and the defocus (-2.0 ~ +2.0 D). Sixty-four eyes in 51 patients were examined. The maximal aMTF was $6.61{\pm}2.16$ at a defocus of $-0.25{\pm}0.66D$ with innate SA, and $7.64{\pm}2.63$ at a defocus of $0.08{\pm}0.53D$ when the SA was 0 (full correction of SA). With full SA correction, the aMTF increased in 47 eyes (73.4%; Group 1) and decreased in 17 eyes (26.6%; Group 2). There were statistically significant differences in Z(3, -1) (vertical coma; P = 0.01) and Z(4, 4) (tetrafoil; P = 0.04) between the groups. The maximal aMTF was obtained at an SA of $+0.01{\mu}m$ in Group 1 and an SA of $+0.13{\mu}m$ in Group 2. Optical quality can be improved by full correction of SA in most pseudophakic eyes. However, residual SA might provide benefits in eyes with significant radially asymmetric aberrations.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.92-99
• /
• 2014

An aspherical lens, which resolves several problems with a spherical lens,typically serves asa key part of an optical system. Generally, an aspherical lens is fabricated using a diamond turning machine or by mean of injection molding. However, residual stress and/or tool marks can arise when using a commercial fabricating method such as DTM or injection molding. A polishing process, thus, is commonly used to obtain a high-precision aspherical lens. In this study, a polishing method using MR fluid was applied to minimize several problems, in this case residual stress and the creation of tool marks, during the cutting process. The MR polishing system was developed to polish aspherical lenses. A series of experiments were performed to obtain a very fine surface roughness. PMMA (the lens material for molding) was used as a workpiece, and the gap size, magnetic field intensity, wheel speed and feed rate were selected as the parameters in this study. Finally, a very fine surface roughness of Ra=2.12nm was obtained after MR polishing.

• Design & Manufacturing
• /
• 제2권1호
• /
• pp.33-38
• /
• 2008

As consumer in optics, electronics, aerospace and electronics industry grow, the demand for ultra precision aspherical surface lens increases higher. Precision turning with single-diamond tools has a long history of development for fabrication of optical quality surfaces since the advent of aerostatic rotary spindles and precise linear motion guide ways. To enhance the precision and productivity of ultra precision aspherical surface micro lens, the following specification of ultra precision grinding system is required: the highest rotational speed of the grinder is 100,000rpm and its turning accuracy is $0.1{\mu}m$, positioning accuracy is $0.1{\mu}m$. The development process of the grinding system for the ultra precision aspherical surface micro lens for optoelectronics industry is introduced. In the work reported in this paper, an intelligent grinding system for ultra precision aspherical surface machining was designed by considering the factors affecting the surface roughness and profiles accuracy. An aerostatic form was adopted to build the spindle of the workpiece and the spindle of grinder and ultra precision LM guide way was adopted in this system. And this paper deals with mirror grinding of an aspheric surface micro lens by resin bonded diamond wheel and spherical lens of BK7. It results was that a form accuracy of $0.6{\mu}m$ P-V and a surface roughness of $0.006{\mu}m$ Rmax.

• 한국임상보건과학회지
• /
• 제8권1호
• /
• pp.1386-1397
• /
• 2020

Purpose: To examine the effectiveness of various treatments; bifocal spectacles, orthokeratology, atropine, and time spent in outdoors; in slowing down the myopia progression for Asian adolescents (6-18age). Methods: The research focused on examining the most effective treatment in controlling myopia based on the literature sources that have been published. Through meta-analysis of various research papers that already has been done in this field, a lot of data was collected. For each treatment, the difference in axial length and spherical equivalent over time was measured and recorded. To quantitatively record the difference, both axial length and spherical equivalent was determined by value of control group value of treatment group. The paper compared the effectiveness of each treatment based on the data that was measured. Results: Adolescents who chose to spend time outdoors in order to slow down myopia progression had axial length difference of 0.03 mm and spherical equivalent difference of 0.17 D. Adolescents that used atropine had axial length difference of 0.36 mm and spherical equivalent difference of 0.92 D. Bifocal spectacle resulted in axial length difference of 0.21 mm and spherical equivalent difference of 0.59 D, and for orthokeratology 0.23 mm and 0.04 D, respectively. Axial length wise, myopia was most controlled by the atropine since there was a greatest difference between the group that got the treatment and the group that did not have the treatment. According to the spherical equivalent difference data, myopia was most controlled by atropine. Conclusion: Atropine showed the most effective result in controlling myopia among the four treatment. Again, compared to other three treatment, using atropine appeared to have greatest ability in slowing down myopia progression since adolescents who were treated with atropine had greatest difference from adolescents in the control group that had the same condition but didn't get the treatment. However, every treatment was only used for 2 or 3 years which is quite short time period to measure the long term effect of the four treatments. Also, since atropine is a pharmaceutical method to control myopia, it may harm adolescents' eyes compared to optical or environmental treatment.