• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.368-378
• /
• 2018

Understanding of turbulent flow in the reactor coolant pump (RCP) is a premise of the optimal design of the RCP. Flow structures in the RCP, in view of the specially devised spherical casing, are more complicated than those associated with conventional pumps. Hitherto, knowledge of the flow characteristics of the RCP has been far from sufficient. Research into the nonintrusive measurement of the internal flow of the RCP has rarely been reported. In the present study, flow measurement using particle image velocimetry is implemented to reveal flow features of the RCP model. Velocity and vorticity distributions in the diffuser and spherical casing are obtained. The results illuminate the complexity of the flows in the RCP. Near the lower end of the discharge nozzle, three-dimensional swirling flows and flow separation are evident. In the diffuser, the imparity of the velocity profile with respect to different axial cross sections is verified, and the velocity increases gradually from the shroud to the hub. In the casing, velocity distribution is nonuniform over the circumferential direction. Vortices shed consistently from the diffuser blade trailing edge. The experimental results lend sound support for the optimal design of the RCP and provide validation of relevant numerical algorithms.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.181-186
• /
• 2002

Lately, as going on increasing in the demand of high power density(power/weight), it is necessary for hydraulic axial piston pump/motor to operate more high pressure and speed. But in these condition, there are some trouble like as friction loss. To reduce this friction loss, hydrostatic bearing is used far axial piston pump/motor frequently. In general, it is difficult to measure accurate friction torque of spherical hydrostatic bearing in the use of the existing devices. So, we have developed the measurement device using the reaction torque sensor to obtain the pure friction torque, fitted in the casing. In this report, we intend to make an introduction about this measurement device for friction torque of the spherical wear part and clarify the effect of friction characteristics on supply pressure and rotational speed with three types of pocket size by using this measurement device.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.353-361
• /
• 2002

The tip leakage flow passing through the clearance between rotor blade tip and casing shroud has been known to occupy an important portion of the rotor overall loss. In this study, flow characteristics in axial flow rotors with different tip clearances is investigated by experimental and numerical methods. The experimental study was carried out to measure static pressure and velocity profiles at the real rotating test rig. The axial flow rotors used for the experiments have ten blades and three different rotor diameter. The tip clearance heights are 1mm, 3mm, and 4.5mm. Measurements were done using spherical type five-hole probe by non-nulling method. The numerical study was carried out to calculate pressure distributions and velocity vectors at the same condition as the experiments in the flow fields of axial flow rotors using Phoenics code.

• 대한인간공학회지
• /
• 제36권4호
• /
• pp.293-303
• /
• 2017

Objective: This study aims to evaluate visual discomfort and visual fatigue caused by watching HMD and smartphones by conducting both subjective and objective measure. Background: With the rapid development of mobile Head-Mounted Display (HMD), the problem of visual discomfort and visual fatigue caused by watching Virtual Reality (VR) contents became a crucial concern for consumers and manufacturers, especially given that the casing of mobile HMD keeps the phone at a specified distance from the lenses that is close to the eyes. Method: Two smartphones were chosen for a preliminary study: LG G5 and Galaxy S7. As for a main study, iPhone 6S and Galaxy S7 were used. After being exposed to the selected clips, participants were asked to answer Simulator Sickness Questionnaire (SSQ) and went through optometric tests that measure tear break-up time, spherical equivalent, and contrast sensitivity. Results: The subjective assessments indicate that HMD causes more visual discomfort compared to watching a smartphone. Furthermore, the experimental result confirms that watching a HMD causes more eye dryness compared to smartphones. Conclusion: The result of the study compared visual discomfort and visual fatigue of two different displays, HMD and smartphone, and confirmed that watching HMD causes more visual discomfort and visual fatigue. Application: Ultimately, this study could help manufacturers understand the strengths and weaknesses of different display forms, providing guidance for an effective application of HMD.

• 한국버섯학회지
• /
• 제16권3호
• /
• pp.175-179
• /
• 2018

양송이는 전세계에서 가장 많이 재배되는 버섯이다. 최근 갈색 계통의 소비는 지속적으로 증가하고 있는 추세이다. '단석1호'는 다포자임의재배법으로 육성되었으며, 국내 양송이 최초 재배지인 경주지역 단석산을 지명을 유래하여 명명되었다. 균사 생장적온은 $20{\sim}30^{\circ}C$이며, 버섯 발생온도는 $15{\sim}20^{\circ}C$이다. 갓 색깔은 중간정도의 갈색이며, 갓의 형태는 구형이다. 갓의 넓이는 45.1 mm, 두께는 23.5 mm이다. 경도는 $8,937g/{\Phi}5mm$이고, 갓의 색도는 L값이 50.4이다. 배양일수는 20일이면 가능하고, 복토 후 버섯의 발생은 18일 정도 소요된다. '단석1호'의 대표적인 특징으로는 개별발생비율이 높기 때문에 수확중 버섯 손실이 적은 특성이 있다.