• 설비공학논문집
• /
• 제14권11호
• /
• pp.964-971
• /
• 2002

A numerical investigation of the constrained melting of phase change materials within spherical-like capsule is presented. A single-domain enthalpy formulation is used for simulation of the phase change phenomenon. The solution methodology is verified with the melting process inside an isothermal spherical capsule. Especially, the effect of capsule shape on the heat storage is emphasized. Two shape parameters are considered from the real capsule shape showing good characteristics of heat storage and the effect of these parameters is examined. Early during the melting process, the conduction mode of heat transfer is dominant. Thus the capsule shape with large surface area is desirable. However, the capsule shape with large surface area plays negative role on the strength of buoyancy-driven convection that becomes more important as melting continues.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제6권
• /
• pp.113-123
• /
• 1998

The present study is to investigate the effect of experimental parameters on the heat transfer characteristics of a spherical capsule storage system using paraffins. N-Tetradecane and mixture of n-Tetradecane 40% and n-Hexadecane 60% were used as paraffins. Water with inorganic material was also tested for the comparison. The experimental parameters were varied for the Reynolds number from 8 to 16 and for the inlet temperature from -7 to 2$^{\circ}C$. Measured local temperatures of spherical capsules in the storage tank were utilized to calculate charging and discharging times, dimensionless thermal storage amount, and the average heat transfer coefficients in the tank. Local charging and discharging times in the storage tank were significantly different. The effect of inlet temperature on charging time was larger than that on discharging time, but the effect of Reynolds number on charging time was smaller than that on discharging time. Charging time of paraffins was faster by 11~72% than that of water with inorganic material, but little difference of discharging time was found among them. The effect of Reynolds number on the dimensionless thermal storage was less during charging process and more during discharging process than the effect of inlet temperature. The effect of the inlet temperature and the Reynolds number on the average heat transfer coefficient of the storage tank was stronger during discharging process than during charging process. The average heat transfer coefficients of the spherical capsule system using paraffins were larger by 40% than those using water.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2601-2610
• /
• 1993

A numerical study on the melting process inside an isothermal spherical capsule is made. It is assumed that the phase change medium of its solid phase is heavier than the liquid phase and therefore the unmelted solid core is continuously moving downward on account of gravity forces. Such a gravity-assisted melting is commonly characterized by the existence of a thin liquid film below the solid core. The present study is motivated to present a full-equation-based analysis of the influences of the initial subcooling and the natural convection on the fluid flow and heat transfer characteristics associated with the gravity-assisted melting. In the light of the solution strategy, the present study is substantially distinguished from the existing works in that the complete set of governing equations in both the melted and unmelted regions are resolved without subdivision of the solution domains. For example, the liquid film region and the upper melted region are treated here as one domain and thus obviating laborious efforts to couple them. Numerical results are obtained by varying the Rayleigh numbers and the degree of subcooling. For the range of parameters examined, the presence of subcooling was found to impede the melting rate. The dropping velocity of the unmelted solid core was observed to affect the natural convection in the liquid significantly. When compared with the available experimental data, much improved prediction was achieved.

• Journal of Biosystems Engineering
• /
• 제33권5호
• /
• pp.303-308
• /
• 2008

The freezing characteristics of two kinds of phase change materials (PCM) encapsulated in a spherical container were investigated with various cooling air temperatures and velocities. The super cooling and solidification time of PCM were highly affected by cooling air temperature and velocity. The experimental equations are derived to express total solidification time of the PCM in terms of Nusselt number and dimensionless temperature.

• 설비공학논문집
• /
• 제9권3호
• /
• pp.354-363
• /
• 1997

The purpose of the present work is to show the best thermal storage material and the sensitivity of the parameters on the thermal performance by experimentally investigating the effects of the parameters on the thermal performance of the spherical capsule system using paraffins superior to the commercial one. The paraffins were n-Tetradecane and the mixture of n-Tetradecane 40% and n-Hexadecane 60%. The experimental parameters were the Reynolds number of 8, 12, and 16 and the inlet temperature of-7, -4, -1, and $2^{\circ}C$. The charging and the discharing time, the dimensionless thermal storage amount, and the averge heat transfer coefficient in the tank were obtained by utilizing the local temperature variation in the tank. The local charging and discharging time in the tank was axially and radially different a lot. The effects of the inlet temperature on the charging and the discharging time were larger during the charging process than during the discharging process, but the effects of the Reynolds number on the charging and the discharging time were in reverse order. The paraffins were better by 11~72% than the water with the inorganic material in the charging time aspect, but no difference in the discharging time aspect. The effects of the Reynolds number on the dimensionless thermal storage amount were smaller than the effects of the inlet temperature during the charging process, but in reverse order during the discharging process within the working range of the experimental parameters. The effects of the inlet temperature and the Reynolds number on the average heat transfer coefficient were larger during the discharging process than during the charging process. The average heat transfer coefficient for the paraffins was larger by 40% maximum than that for the commercial material during the charing and the discharging process.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.247-248
• /
• 2022

3D printer-based self-healing capsules have been proposed to heal cracks by enabling various structural designs, repeatable fabrication, and strength analysis of the capsules. The Fusion Deposition Modeling (FDM) method was used to design, analyze, and produce new self-healing capsules that are widely used at low cost. However, PLA extruded from FDM has low interlayer adhesion energy, and thus strength varies depending on the angle of load applied to the laminated layer and the concrete structure, thereby degrading the performance of the self-healing capsule. Therefore, in this paper, the structure of the capsule manufactured by the FDM PLA method has isotropic strength was designed. In addition, the fracture strength in the x, y, and z directions of the load applied through the compression test was analyzed. As a result, it was confirmed that the newly proposed capsule design has an isotropic fracture strength of 1400% in all directions compared to the existing spherical thin-film capsule.

• Advances in aircraft and spacecraft science
• /
• 제4권4호
• /
• pp.487-501
• /
• 2017

The main purpose of the paper is to analyze effect of geometrical parameters of the reentry capsules such as radius of the spherical cap, shoulder radius, back shell inclination angle and overall length on the flow field characteristics. The numerical simulation with viscous flow past ARD (Atmospheric Reentry Demonstrator), Soyuz (Russian) and OREX (Orbital Reentry EXperimental) reentry capsules for freestream Mach numbers range of 2.0-5.0 is carried out by solving time-dependent, axisymmetric, compressible laminar Navier-Stokes equations. These reentry capsules appear as bell, head light and saucer in shape. The flow field features around the reentry capsules such as bow shock wave, sonic line, expansion fan and recirculating flow region are well captured by the present numerical simulations. A low pressure is observed immediately downstream of the base region of the capsule which can be attributed to fill-up in the growing space between the shock wave and the reentry module. The back shell angle and the radius of the shoulder over the capsule are having a significant effect on the wall pressure distribution. The effects of geometrical parameters of the reentry capsules will useful input for the calculation of ballistic coefficient of the reentry module.

• 대한수의학회지
• /
• 제26권2호
• /
• pp.195-199
• /
• 1986

The papillary tubercles (PTs) developed on the splenic capsule of normal Landrace pigs were collected and their histological structures were observed with light microscope. The results were summarized as follows : 1. The external features of the PTs were smooth spherical or oval form protruded on the splenic capsules. On cross section of PTs, the shapes were predominantly round or elliptical single follicular form, and were often multifollicular and irregular form in some PTs. 2. The PTs were interposed into the splenic capsule. Therefore the peripheral boundary of PT was consisted of splenic capsular tissue and this tissue was covered with mesothelium, The basal tissues of PT were consisted of thick connective tissue and smooth muscle of splenic capsule, and capsular foramen for transport tract between splenic parenchyma and the PT was found at the center of the basal boundary of PT. 3. The basal region of PT was composed of parenchyma and this tissue was the splenic red pulp but the central and peripheral regions of PT contained much more erythrocytes than in the splenic parenchymae. 4. The splenic parenchymae adjoining to PT contained more erythrocytes than in other splenic parenchymal regions and parallel fixed cells directed to the capsular foramen.

• 대한수의학회지
• /
• 제37권3호
• /
• pp.463-469
• /
• 1997

This study was performed to investigate the gross anatomical features and microscopical structures of the hemal nodes and the hemolymph nodes in the water deer (Hydropotes inermis) found in Kangwon-do, Korea. The hemal nodes and hemolymph nodes were observed mainly in the periphery of the thoracic and abdominal aortae of the animals. The size of hemal nodes was generally smaller than that of the hemolymph nodes, and the shape of the both organs was spherical or ovoid. The color of the hemal nodes was red or black while that of the hemolymph nodes was gray with red bands. The hemal nodes were surrounded by a thin connective tissue capsule and there were extensive subcapsular and deep sinuses distended by a great number of erythrocytes. Although a few number of lymphatic nodules and small areas of diffuse lymphatic tissues were observed in the parenchyma, no typical cortex and medulla were defined in the hemal node. Small numbers of blood vessels were found at the connective tissue capsule but lymph vessel was not observed microscopically in this organ. The hemolymph nodes were covered by a relatively thick connective tissue capsule and there was a hilus in each node. The parenchyma was divided into cortex and medulla. The cortex was composed of a few numbers of lymphatic nodules and some diffuse lymphatic tissues. The medulla comprised medullary sinus and cords. Afferent and efferent lymph vessels were observed at the periphery of the capsule and the hilus, respectively. The subcapsular and medullary sinuses were not extensive but filled with small numbers of erythrocytes. The stroma of hemal node and hemolymph node was composed of reticular cells and fibers, and the capsule and trabecula consisted of collagenous fibers with smooth muscle fibers.

• 설비공학논문집
• /
• 제7권4호
• /
• pp.577-588
• /
• 1995

A numerical study is made on the melting process of an unconstrained ice inside an isothermal ice-ball capsule. The unmelted ice core is continuously ascending on account of buoyancy forces. Such a buoyancy-assisted melting is commonly characterized by the existence of a thin liquid film above the ice core. The present study is motivated to present a full-equation-based analysis of the influences of the initial subcooling and the natural convection on the fluid flow associated with the buoyancy-assisted melting. In the light of the solution strategy, the present study is substantially distinguished from the existing works in that the complete set of governing equations in both the melted and unmelted regions are resolved in one domain. Numerical results are obtained by varying the wall temperature and initial temperature. The present results reported the transition of the flow pattern in a spherical capsule, as the wall temperature was increased over the density inversion point. In addition, time wise variation of the shapes for the liquid film and the lower ice surface, the time rate of change in the melt volume fraction and the melting distance at symmetric line is analyzed and is presented.