• 한국항공우주학회지
• /
• 제30권4호
• /
• pp.99-105
• /
• 2002

본 연구에서는 정익과 동익간의 축방향 간격을 달리하여 축류형 터빈에서의 성능시험을 수행하였다. 실험에 사용된 터빈은 저압저속터빈으로써 평균반경에서 반동도가 0.373이며 축류형 3차원 단단터빈이다. 터빈의 평균반경 직경은 257.56mm이며 평균반경에서 동익의 익현은 28.2mm이다. 성능시험을 위한 공기력 입력장치로는 풍동이 사용되었으며 풍동의 터보블로워 동력은 30kW로써 290mmAq의 정압력에서 $340m^3$/min의 공기량을 보낼 수 있다. 터빈에서의 회전수 및 출력은 터빈 축에 직결식으로 연결된 다이나모메터에서 제어되었다. 실험에서 축방향 간격조정은 평균반경에서의 정익 축방향 익현의 1/4에서 3배까지 변경하여 총 9개의 성능시험을 수행하였다. 같은 무차원 유량과 RPM에서 축방향의 간격에 따른 효율의 변화는 최대 8%이내지만 최고효율을 얻게되는 축방향 간격은 1.6-1.9Cx 였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권5호
• /
• pp.46-55
• /
• 1994

The purpose of this research is to construct experimental test set-up and to establish a series of performance test program for the domestically developed hydraulic couplings, and to provide a software to store and utilize these experimental data which can be used to improve the performance of the hydraulic coupling and solve the job problems confronted during operation. The performance test consists of measurement of torque, rpm and efficiency of the hydraulic coupling for three different amounts of working fluid with various loads to the output shaft, and investigating the torque, rpm and efficiency characteristics with respect to these parameters. The results of this study can contribute to the development of variable speed hydraulic coupling and torque converter pursued by the domestic industry.

• 기계와재료
• /
• 제21권3호
• /
• pp.42-51
• /
• 2009

원자력/화력 발전소에서 사용중인 터빈출력제어장치(turbine power control device)는 유압 서보액추에이터(hydraulic servo actuator)로 구동하는 특수 스팀 밸브(steam valve)로서 터빈의 속도를 제어하고 스팀을 차단하는 기능이 있다. 대형 발전기(500~1000Mw)를 구동하여 양질의 전기를 생산하기 위해서는 발전기에 연결된 고압 및 저압터빈에 최적량의 스팀을 공급하여야 하고, 고속(화력 3600 rpm, 원자력 1800 rpm)으로 회전하는 터빈이나 스팀계통에 이상이 발생할 경우 터빈의 과속(over speed) 방지를 위하여, 즉시 터빈으로 공급되는 스팀을 차단하여 터빈을 보호해야 한다. 따라서 터빈의 속도제어와 계통의 스팀 량을 감시하여 차단하는 발전소의 특수 밸브의 신뢰성확보기술이 요구된다. 특히 원자력발전소의 경우 핵연료교환주기(약 24개월)에 밸브들을 정비 또는 교체하고 있어 이때마다 시스템과 매칭(튜닝)기술이 요구되었다. 본 연구에서는 전량 수입에 의존했던 원자력/화력 발전소의 특수 밸브인 터빈출력제어장치의 국산화 개발과 신뢰성확보기술 효과에 대하여 논하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.67-69
• /
• 1999

ADD is under development for the high speed motor. This paper describes the test results for obtaining the maximum output by leading angle of encoder. So we carried out the test for obtaining the optimum leading angle of encoder. Maximum output 80[Kw] at 20,000[rpm] was obtained at leading angle of encoder at near $22^{\circ}$. We confirmed the maximum output 106[kw] of 25,000[rpm] at leading angle of encoder at $34.6^{\circ}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.750-753
• /
• 2000

ADD is under development for the high speed motor. This paper describes simulation and test results for obtaining the maximum output by leading angle of encoder. So we carried out the test for obtaining the optimum leading angle of encoder. Maximum output 80[kW] at 20,000[rpm] was obtained at leading angle of encoder at near $22^{\circ}$. We confirmed the maximum output 106[kW] of 25,000[rpm] at leading angle of encoder at $34.6^{\circ}$.

• Journal of Biosystems Engineering
• /
• 제32권4호
• /
• pp.223-229
• /
• 2007

This study was conducted to develop a 2 row type band furrow tiller for a walking cultivator. The tillage and weeding operations in the furrow of dry fields has been done manually or chemical herbicide has been applied. The application of herbicide induces soil pollution and manual operation requires heavy labor. This 2-row type implement was developed to substitute this manual operation and to minimize soil pollution. The developed implement was composed of power transmitting device, tilling device, frame and tail wheel. The max. plowing width and depth were 300mm and 180mm, respectively. The revolutions of the hexagonal shaft and the tillage shaft were $227{\sim}376rpm$ and $355{\sim}590rpm$, respectively. The adequate working speed was $0.50{\sim}0.83m/s$ and the field capacity was $0.17{\sim}0.28hr/10a$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.678-679
• /
• 2015

A prototype of a dual-stator axial-flux PM vernier machine with rated 5.5kW output power at 300rpm speed is constructed and tested to verify its competitive performance and the reliability of the proposed design approach and the FEM simulation results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.462-465
• /
• 2002

In this treatise, we developed a balance grinding appointment main axis of auto balancing that can control all vibrancy components and instability of cutting area, disturbance etc.. including high speed unbalance quantities more than 6,000 rpm on the basis of estimate control technology that consider grinding mechanism to purpose balancing on the of machine.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.45-47
• /
• 2005

A digital controller of stepping motors is designed for removing mid-range resonance. Rotor oscillation is detected from motor currents and the microprocessor generates frequency modulation taking into account rotor oscillation. ATmega16 is employed and the controller drives stepping motors up to 3000[rpm] at micro stepping.

• 대한전기학회논문지
• /
• 제31권11호
• /
• pp.146-154
• /
• 1982

This paper proposes a new circuit for the CDI system to have a constant ignition power at the engine speed range of 500 to 7500 rpm and the battery voltage range of 12 to 16 volts in the 4-cylinder automobile. The proposed CDI system has a closed-loop with a PWM DC-DC converter controlled by the error signal between capacitor voltage and reference voltage. In order to decrease the capacitor charging time, the primary winding of ignition coil is made to be shorted during capacitor charging. An experimental suystem is fabricated and the results obtained thereof are found to be satisfactory.