• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.401-409
• /
• 2015

Defects generated in a railroad track that guides the railroad vehicle have the characteristic of growing fast; as such, the detection technology for railroad track defects is very important because defects can eventually cause mass disasters like derailments. In this study, a speed-up test facility was fabricated to investigate the feasibility of using magnetic flux leakage (MFL) technology for defect detection in a railroad track under speed-up condition; a test was conducted using a railroad track specimen with defects. For this purpose, an MFL sensor head dedicated to the configuration of the railroad was designed and test specimens with artificial defects on their surfaces were manufactured. Using the test facility, a speed-up test ranging from 4km/h to 12km/h was performed and defects including locations were successfully detected from MFL signals induced by defects with enhanced visibility by differentiating raw MFL signals. In the future, it should be possible to apply this system to a high-speed railroad inspection car by improving the lift-off stability that is necessary for speed-up of the developed MFL sensor system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.9-14
• /
• 2008

Intentional city bands and public radio frequencies could reduce the internet transmission speed on the wired lines because AM and HF band are overlapping on the xDSL up and down data steam by way of the wired transmission lines. We were designed the adaptive common mode rejection circuit with 2 way amplifier against public radio frequency. Specially our circuits were applied for power and signal lines. We could reduced the common mode rejection up to 30dB and increased the up stream speed around 1.8 times using a our developed equipments. Also it could expanded the transmission distance up to 1.7 times than old lines.

• Korean Journal of Food Science and Technology
• /
• v.15 no.4
• /
• pp.392-398
• /
• 1983

A pilot single-screw food extruder was constructed, and its mechanical properties and product characteristics were investigated by using corn grits. The screw rotational speed was varied and the changes in temperature profile of the barrel for the start-up period of operation were measured. The rate of heat generation for the start-up period was affected by the screw speed and feed rate. The screw speed resulted in a great influence on the estimated dough viscosity. The changes in the dough viscosity could indicate the on-set of termoplastic reaction in the barrel. The expansion ratio during the start-up period mainly depended on the barrel temperature and the degree of thermoplastic reaction in the barrel. The barrel temperatures for the gelatinization and burning of corn grits depended on the screw speed as well as the feed rate.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.239-244
• /
• 2011

Technical advancement in the field of world-class railway has brought the development of passenger safety, efficient operation and fast passenger service. The study of the railway speed-up has been progressed for a long time. As for the speed-up of trunkline railways, its design work has already promoted in some railway tacks and some track sections has already been under construction. In such a perspective we should review if the domestic signaling system is the optimal system and figure out the trend of signaling system for the speed-up that is recently applied over the world. In this way learning about justification and futurition, we should secure the national competitiveness in the long term and review the system available to international exports. Further, it is important to apply the result to the research project currently being pursued. In addition, predicting the recent international trends, we should show the direction of the future-oriented and economic signaling system.

• The Journal of Korea Robotics Society
• /
• v.13 no.3
• /
• pp.182-189
• /
• 2018

The purpose of this paper is to suggest the methodology for the establishment of operational concept for speed-up of defense robot and improvement direction of the defense acquisition system for the defense robot. In order to achieve this goal, the current defense acquisition system was analyzed into long-term planning, mid-term programming, and project execution stages. And I suggest the methodology for the establishment of operational concept for speed-up of defense robot and direction of development of the defense robot acquisition system considering the characteristics of the robot in terms of core technologies of robot, robot ecosystem and effectiveness-based-robot-design, respectively. Based on the methodology for establishment of the operational concept of defense robot and development direction of the defense acquisition system presented in this study, it will be possible to design efficiently the defense robot in the future.

• Proceedings of the KIEE Conference
• /
• 2004.07e
• /
• pp.123-125
• /
• 2004

Tilting train has been developed to increase the operational speed of the trains on conventional lines which have many curves. This train are tilted at curves to compensate for unbalanced carbody centrifugal acceleration to a greater extent than compensation produced by the track cant, so that passengers do not feel centrifugal acceleration and thus trains can run at higher speed at curves. This paper developed 3 Dimensional Digital Mock-UP using PDM(product data managemnet) to make a system engineering of TTX(tilting train express) wiht maximum operation speed 180 km/h.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.199-203
• /
• 2013

In this paper, a fast algorithm of discrete cosine transform-based interpolation filter (DCT-IF) for HEVC (high efficiency video coding) encoder is proposed. DCT-IF filter accounts for around 30% of encoder complexity, according to the computational complexity analysis with the HEVC reference software. In this work, the proposed DCT-IF is optimized by applying frame-level interpolation, SIMD optimization, and task-level parallelization via OpenMP on a developed C-based HEVC encoder. Performance analysis is conducted by measuring speed-up factor of the proposed optimization technique on the developed encoder. The results show that speed-up factors by frame-level interpolation, SIMD, and OpenMP are approximately 38-46, 3.6-4.4, and 3.0-3.7, respectively. In the end, we achieved the speed-up factor of 498.4 with the proposed fast algorithm.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.88-97
• /
• 1999

In this study, a systematic approach for roll pass design in bar rolling was studied. To minimize the trial and errors in the process design, a roll CAD system and a FE analysis system were combined. Based on the system, a methodology for roll pass design by FEM was studied. At first, designed process was compared with the FE analysis results and process redesign based on the FEM results was performed to obtain the specified final geometry. Then, empirical formula for roll speed set-up was compared with the FE analysis results. Further study on various simulations for bar rolling will help in making up for the inaccuracy in the currently used empirical roll speed rules. In addition, verification of the accuracy of the FE analysis system must be performed using experimental data in the industry.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.233-243
• /
• 2012

HBD(Hot Box Detector) is a device to monitor temperature rises to inappropriate lubricant use or mechanical defects. If a train operates without recognizing such an effect, it might result in bearing overheating due to defects and cause a dangerous situation that it could derail a train owing to the damage of axles. Now for the Gyeongbu HSL at 300km/h, the laws related to monitoring overheated axle bearings are notified in the Railway Safety Law and the Railway Construction Law. But in case of the conventional speed-up lines that a train operates at 180 to 230 km/h, the revised bill of relevant standards is ongoing. Therefore in this paper we present references and reviews investigated in order to use the optimal HBD in the conventional speed-up lines.

• Journal of the Korean Magnetics Society
• /
• v.9 no.5
• /
• pp.263-270
• /
• 1999

The characteristics of lubricant for computer hard disk was investigated by surface analysis technique. The bonding state between carbon and lubricant is analysed to indentify the origin of adhesion. It is found that the thickness of lubricant is increased as pulling-up speed becomes faster and lubricant concentration is increased. The dominant surface contaminants on carbon overcoat are identified with C-OH and CO. The bond strength between carbon and lubricant is enhanced with heat treatment.