• Proceedings of the KSR Conference
• /
• 2003.10a
• /
• pp.156-161
• /
• 2003

Korean High Speed Train (KHST) has been tested on high speed line in JungBu site since it was developed in 2002. The data acquisition system was used to test successfully the on-line test for proving the dynamic performance of KHST. The recognition of system vibration mode for railway vehicle is essential to understand the characteristics of design for dynamic system and diagnose the dynamic problems of vehicle system during test and operation. But, up to now, there are the efforts to know the system vibration mode within limit of theoretical field only, not experimental approach with systematic method. The theoretical results are too reliable to apply to real design problem, because it is theoretically based on the homogeneous linear system although the real system have the nonlinear characteristics and vary the environmental conditions. Therefor, in this paper, it is proposed the efficient method of vibration analysis for rail vehicle system and this method apply to KHST to recognize the vibration mode characteristics of it. The results show that this method is able to make the system vibration modes for KHST clear.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.3
• /
• pp.333-343
• /
• 2006

In this paper, the baseline-length information is directly modeled as a measurement for the Wald test, which speeds up the resolution convergence of the integer ambiguity of GPS carrier phase measurements. The convergent speed improvement is demonstrated using numerical simulation and real experiments. It is also shown that the integer ambiguities can be resolved using only four actual satellite measurements with very reasonable convergence speed, if the baseline-length information is used just like one additional observable satellite measurement. Finally, it is shown that the improvement of convergence speed of the Wald test is due to the increase of the probability ratio with the use of the baseline-length constraint.

• Tribology and Lubricants
• /
• v.13 no.4
• /
• pp.47-52
• /
• 1997

Friction torques, electrical contact resistances and bearing temperatures were measured on high speed angular contact ball beatings for the spindle of machine tools. The test bearings ran with oil-air lubrication at the thrust loads from 320 N to 1920 N and at the rotational speed of up to 12000 rpm. Electrical contact resistances between balls and races were measured to evaluate the formation of the lubricant film in the contact area. The test results with sufficient lubrication showed that the variations of friction torques were sensitive to the thrust loads and the rotational speeds, and that the friction torques were higher than those with insufficient lubrication. With insufficient lubrication and high thrust loads, the collapse of the lubricant film was detected even at a high rotational speed. It was concluded that these high speed beatings to run in condition of fluid lubrication should require monitoring not only the temperature increase of the bearing but also the lubricant film formation in contact areas resulting from the change in the applied load and the lubricant amount.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.726-728
• /
• 2004

In this paper, the gain of the observer is properly set up using the fuzzy control and Fuzzy-Sliding observer(FSQ) that have a superior transient characteristic and is easy to implement compared to the existing method is designed. It estimate the differentiation of the armature current directly using the armature current measured in the AC motor. It estimate the speed of the rotor using the differentiation. It is proposed speed sensorless control method using the estimated speed. Optimal gain of speed observer(Luenberger observer) was set up using the fuzzy control and adapted speed control of AC servo motor. To verify the performance of designed Fuzzy-Sliding observer, simulation compared with fixed speed observer gain of G.B Wang and S.S Peng's sliding observer is performed. Also, it was proved the excellence and feasibility of the proposed observer from the comparison test with a speed sensor and without a speed sensor which used a highly efficient drive and 400W AC servo motor starting system.

• Physical Therapy Rehabilitation Science
• /
• v.13 no.1
• /
• pp.43-52
• /
• 2024

Objective: This study aimed to investigate the impact of a 12-week combined cognitive and physical exercise program on cognitive and physical functions in older adults diagnosed with mild cognitive impairment (MCI). Design: A one-group pretest-posttest study. Methods: Twelve participants with MCI engaged in a weekly 60-minute session of combined cognitive and physical exercise program. Cognitive function was assessed using the Montreal Cognitive Assessment (MoCA), while physical function was evaluated through measures of muscle strength, postural balance, and walking capabilities. Muscle strength assessments included the arm curl test, handgrip strength, and the 5 sit-to-stand test. Postural balance was evaluated using the one-leg stance test, timed up-and-go test, functional reach test, and four square step test. Walking function was analyzed through a gait analysis device. Pre- and post-intervention measurements were compared to determine the effects of the exercise program. Results: The results demonstrated significant improvements in MoCA, arm curl test, timed up-and-go test, walking speed, and cadence following the 12-week intervention (p<0.05). MoCA scores revealed enhanced cognitive performance, while measures of muscle strength, including the arm curl test, exhibited significant changes. Improvements in timed up-and-go test scores indicated enhanced mobility, accompanied by increased walking speed and cadence, as evidenced by gait analysis. Conclusions: This study suggests that a structured 12-week program incorporating both cognitive and physical exercises can lead to meaningful improvements in cognitive and physical functions among older adults with MCI.

• Journal of The Korean Society of Integrative Medicine
• /
• v.6 no.1
• /
• pp.45-54
• /
• 2018

Purpose : The purpose of this study is to evaluate the effects of Action-observational training program on gait and balance of patients with hemiplegia. Method : The subjects of this study are patients with hemiplegia; 10 patients who agreed with this research, were picked up. Participants were divided randomly into equal groups: experimental group that applied to action-observation training for at least 30 minutes/day for 6 weeks and control group that underwent general task-oriented training. Gait and balance were measured 10 meter walk test(10MWT), gait speed, berg balance scale(BBS) and timed up and go(TUG). The intervention were compared by measuring before and after. Result : There were significant improvements in the subscales of the gait and balance test of those who practiced with the Action-observational training program, while the control group showed no significant changes. Conclusion : Therefore, Action-observational training program is effective in improvement of to improve the gait and balance in patients with hemiplegia.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.25-29
• /
• 2010

Safety of railroad is result of reliability which is received from test & evaluation of system. Railroad system is consisted of various sub system such as vehicle, supply of electric power, signal, communication, rail track construction, operation. To secure safety of railroad, evaluation about parts, assembly, sub system, whole system etc.. that compose railroad is essential. In this paper, I wish to describe for results that analyze korean tilting vehicle's derailment coefficient developed by national research achievement. Confirmed that is possible even if speed up, curved line department running speed that estimate korean tilting vehicle's running safety in curved line track of Jungang Line about 20 km/h than present operating speed.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1587-1591
• /
• 2009

Safety of railroad is result of reliability which is received from test & evaluation of system. Railroad system is consisted of various sub system such as vehicle, supply of electric power, signal, communication, rail track construction, operation. To secure safety of railroad, evaluation about parts, assembly, sub system, whole system etc.. that compose railroad is essential. In this paper, I wish to describe for results that analyze korean tilting vehicle's derailment coefficient developed by national research achievement. Result that evaluation korean tilting vehicle's running safety, verified that secure even if speed-up 30 km/h than operating speed of present in curved track.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.4
• /
• pp.84-89
• /
• 2008

It is hard to find experimental data for a model test of small high-speed planning boats. It is difficult to verify the performance seen in a model test for a high-speed boat because the ship-model scale-ratio is very small and the flow velocity of the circulating water channel and the X-carriage speed of the towing tank are restricted. Therefore most hull-form designs for high-speed small boats depend on the sea-trial test result for similar boats or evaluation through numerical calculations. This study investigated the anti-rolling effect of the stern sub-body in a 50-knot doss planning boat. To carry out this work, new model test procedures were set up in the actual sea. Using this method, the anti-rolling effect of the stern sub-body was investigated. A stern sub-body attached to a planning boat was proved to be effective in reducing the roll and pitch angle.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.119-126
• /
• 2000

In this paper. a simple high-speed crash test rig for members of vehicle was developed for the improvement of crashworthiness of vehicle's side rail. The cart hanging the specimen is accelerated up to 35 mph by the force of freely dropping weight and 1:3 accelerating pulleys. The cart with shock absorbers travels on the rail roads, so it does not transfer any additional vibration to the specimen. To measure the test results, two types of accelerator are considered. the one is a strain gage type and the other is a piezo type. The test rig is rated good to test the specimen like a side rail of vehicle as developing the vehicle's structures in the early design stage.