• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6237-6245
• /
• 2013

This study examined the effects of backward walking with rhythmic auditory stimulation on the gait and balance of stroke patients. Twenty-one people were divided randomly into three groups; group I(n=7, forward walking), group II(n=7, backward walking), group III(n=7, backward walking by rhythmic auditory stimulation). Each group was trained for 30 minutes 5 times per week for 3 weeks, and was evaluated using a 10m walking test, time up and go test, functional reach test, stride length and step length asymmetry ratio. As a result, the pre- to post-test measures revealed a significant effect in each group on the gait speed, gait symmetry and balance(p<.05). The walking speed, gait symmetry and balance were higher in group II (p<.05) than in group I and it was the highest in group III(p<.05). The stride length was higher in group II and group III(p<.05) than in group I. In conclusion, for stroke patients, backward walking training with rhythmic auditory stimulation is effective on the gait speed, gait symmetry and balance.

• The Journal of Korean Society for Radiation Therapy
• /
• v.35
• /
• pp.41-51
• /
• 2023

Purpose: This study compares and analyzes the image quality of 3D-CBCT(Cone Beam Computed-Tomography) and Gated CBCT according to baseline changes during SBRT(Stereotactic Body RadioTherapy) in lung cancer patients to find a useful CBCT method for correcting movement due to breathing Materials and methods : Insert a solid tumor material with a diameter of 3 cm into the QUASAR^TM phantom. 4-Dimentional Computed-Tomography(4DCT) images were taken with a speed of the phantom at period 3 sec and a maximum amplitude of 20 mm. Using the contouring menu of the computerized treatment planning system Eclipse^TM Gross Tumor Volume was outlined on solid tumor material. Set-up the same as when acquiring a 4DCT image using Truebeam STx^TM, breathing patterns with baseline changes of 1 mm, 3 mm, and 5 mm were input into the phantom to obtain 3D-CBCT (Spotlight, Full) and Gated-CBCT (Spotlight, Full) images five times repeatedly. The acquired images were compared with the Signal-to-Noise Ratio(SNR), Contrast-to-Noise Ratio(CNR), Tumor Volume Length, and Motion Blurring Ratio(MBR) based on the 4DCT image. Results: The average Signal-to-Noise Ratio, Contrast-to-Noise Ratio, Tumor Volume Length and Motion Blurring Ratio of Spotlight Gated CBCT images were 13.30±0.10%, 7.78±0.16%, 3.55±0.17%, 1.18±0.06%. As a result, Spotlight Gated-CBCT images according to baseline change showed better values than Spotligtht 3D-CBCT images. Also, the average Signal-to-Noise Ratio, Contrast-to-Noise Ratio, Tumor Volume Length and Motion Blurring Ratio of Full Gated CBCT images were 12.80±0.11%, 7.60±0.11%, 3.54±0.16%, 1.18±0.05%. As a result Full GatedCBCT images according to baseline change showed better values than Full 3D-CBCT images. Conclusion : Compared to 3D-CBCT images, Gated-CBCT images had better image quality according to the baseline change, and the effect of Motion Blurring Artifacts caused by breathing was small. Therefore, it is considered useful to image guided using Gated-CBCT when a baseline change occurs due to difficulty in regular breathing during SBRT that exposes high doses in a short period of time

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1822-1831
• /
• 2015

This study was carried out to optimize coating process of the rice snack added with dried shrimp powder by using single extruder. A total of 8 independent variables were used for 4 independent variables of edible oil coating and 4 independent variables of seasoning coating. 4 independent variables for edible oil coating were set up as 10, 15, 20, 25 and 30% for the content of edible oil; 40, 50, 60, 70 and $80^{\circ}C$ for the tumbler temperature; 60, 70, 80, 90 and 100 rpm for the tumbler speed; 2, 3, 4, 5 and 6 min for the coating time. 4 independent variables for seasoning coating were set up as 2, 3, 4, 5 and 6% for the content of seasoning; 40, 50, 60, 70 and $80^{\circ}C$ for the tumbler temperature; 50, 60, 70, 80 and 90 rpm for the tumbler speed; 2, 3, 4, 5 and 6 min for the coating time. The characteristics of the dependent variables as coating yield and Breaking ratio of collet due to the condition changes of the independent variable was studied during process of edible oil coating and seasoning coating, respectively. As a results of this study, 20% of edible oil content, $70^{\circ}C$ of tumbler temperature, 80 rpm of tumbler speed, 4 min of coating time for process of edible oil coating, 3% of seasoning content, $60^{\circ}C$ of tumbler temperature, 70 rpm of tumbler speed, 3 min of coating time for process of seasoning coating were found to be the most preferable over other independent variables for the production of snack. In conclusion, it is necessary to set the independent variable in order to produce the high quality snack added with the rice as the main raw material and dried shrimp, edible oil and seasoning as the sub-materials.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.326-330
• /
• 2001

The characteristics of used wine yeast strains were as follows, S6U showed low fermentation speed than those of other yeast strains, but this strain fermented completely later. The wine fermented by W-3 was very low contents of total acid, 0.75% and the ones fermented by UCD530 and AC- contained much extract, 3.26 mg/L and 3.22 mg/L respectively. The wine fermented by CEG and CS2 were predominant in yellowness, and EC1118 produced large amount of acetaldehyde, 49.9 mg/L than those of other strains. EC1118 and CY3079 displayed low methylene blue dyeing ratio, below 15%, meaning high alcohol tolerance yeast. UCD530 produced extremely high contents of glycerol, succinate and lactate compared with other strains. These properties revealed that UCD530 was a typical Saccharomyces bayanus species. The main organic acids produced by wine yeasts were pyruvate, lactate, succinate and acetate. The concentration of acetate in experimental wine could be divided into two parts, one group had concentration below 170 mg/L (UCD530, EC1118, AC-, CY3079, W-3), and the other had concentration up to 350 mg/L (S6U, CEG, CS2).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.274-282
• /
• 1998

This study deals with sinking resistance for purse seine, in the case of different d/l, ratio of twine diameter and leg length. Experiments carried out on the six types simplified reduced model seines which were made of knotless netting. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two -ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cm for seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. Experiments were measured in the observation channel of a flume tank at the static conditions Sinking motion was recorded by the two sets TV-camera for VTR which were placed in top and side of the model seine, and reading coordinate carried out by the video digitization system. An analysis were calculated out by simultaneous differential equations for numerical method by Runge - Kutta - Gill sub - routine. The results obtained were as follows: 1. Average sinking speed of seine of seine margin was fastest for Ⅵ seine followed by V, IV, III, II and I seines. 2. The coefficient of resistance for a seine wall was depended upon the ratio of d/l : KD =0.081 (d/l )-0.5 3. The coefficient of resistance for netting bundle was not depended upon the ratio of d/l :CR = 0.91 (), d : Twine diameter, l : Leg length, : Density of netting materals, $\omega$ : Density of water

• Resources Recycling
• /
• v.25 no.5
• /
• pp.75-83
• /
• 2016

AlN powder was prepared by carbon reduction and subsequent nitridation method through the scale-up experiments of 0.7 ~ 1.5 kg per batch. AlN powder was synthesized using the mixture of $Al_2O_3$ powder and carbon black at $1,550{\sim}1,750^{\circ}C$ for 0.5 ~ 4 hours under nitrogen atmosphere (flow rate of nitrogen gas: $10{\sim}40{\ell}/min$) at $2.0{\times}10^{-1}Torr$. Experimental results showed that $1,700{\sim}1,750^{\circ}C$ for the reaction temperature, 3 hr for reaction time, and $40{\ell}/min$ for the flow rate of nitrogen gas were the optimal conditions. Also, in order to remove carbon in the synthesized AlN, the remained carbon was removed at $650{\sim}750^{\circ}C$ for 1 ~ 2 hr using horizontal tube furnace. The results showed that 1 : 3.2 mol ratio of $Al_2O_3$ to carbon black, reaction temperature of $750^{\circ}C$, reaction time of 2 hours, rotating speed of 1.5 rpm under atmosphere condition were the optimal conditions. Under these conditions, high-purity AlN powder over 99% could be prepared: carbon and oxygen contents of the AlN powder were 835 ppm and 0.77%, respectively.

• ETRI Journal
• /
• v.26 no.3
• /
• pp.229-240
• /
• 2004

This paper reports on our development of a dual-mode transceiver for a CMOS high-rate Bluetooth system-onchip solution. The transceiver includes most of the radio building blocks such as an active complex filter, a Gaussian frequency shift keying (GFSK) demodulator, a variable gain amplifier (VGA), a dc offset cancellation circuit, a quadrature local oscillator (LO) generator, and an RF front-end. It is designed for both the normal-rate Bluetooth with an instantaneous bit rate of 1 Mb/s and the high-rate Bluetooth of up to 12 Mb/s. The receiver employs a dualconversion combined with a baseband dual-path architecture for resolving many problems such as flicker noise, dc offset, and power consumption of the dual-mode system. The transceiver requires none of the external image-rejection and intermediate frequency (IF) channel filters by using an LO of 1.6 GHz and the fifth order onchip filters. The chip is fabricated on a $6.5-mm^{2}$ die using a standard $0.25-{\mu}m$ CMOS technology. Experimental results show an in-band image-rejection ratio of 40 dB, an IIP3 of -5 dBm, and a sensitivity of -77 dBm for the Bluetooth mode when the losses from the external components are compensated. It consumes 42 mA in receive ${\pi}/4-diffrential$ quadrature phase-shift keying $({\pi}/4-DQPSK)$ mode of 8 Mb/s, 35 mA in receive GFSK mode of 1 Mb/s, and 32 mA in transmit mode from a 2.5-V supply. These results indicate that the architecture and circuits are adaptable to the implementation of a low-cost, multi-mode, high-speed wireless personal area network.

• Safety and Health at Work
• /
• v.3 no.1
• /
• pp.22-30
• /
• 2012

Objectives: To challenge the problem of slipperiness, various slipmeters have been developed to assess slip hazard. The performance of in-situ slipmeter is, however, still unclear under the various floor conditions. The main objectives of this study were to evaluate the performance of three kinds of slipmeters under real conditions, and to find their dynamic and kinematic characteristics, which were compared with gait test results. Methods: Four common restaurant floor materials were tested under five contaminants. Slipmeters and human gaits were measured by high speed camera and force plate to find and compare their dynamic and kinematic characteristics. Results: The contact pressures and built-up ratio were below those of subjects. The sliding velocity of British Pendulum Tester was above those of subjects, while those of BOT-3000 and English XL were below those of subjects. From the three meters, the English XL showed the highest overall correlation coefficient (r = 0.964) between slip index and $R_a$, while the rest did not show statistical significance with surface roughness parameters ($R_a$, $R_z$). The English XL only showed statistical significance (p < 0.01) between slip index and contaminants. The static coefficient of friction obtained with the BOT-3000 showed good consistency and repeatability (CV < 0.1) as compared to the results for the BPT (CV > 0.2) and English XL (CV < 0.2). Conclusion: It is unclear whether surface roughness can be a reliable and objective indicator of the friction coefficient under real floor conditions, and the viscosity of contaminants can affect the friction coefficient of the same floors. Therefore, to evaluate slipperiness, the performance of the slipmeters needed to improve.

• Journal of Digital Contents Society
• /
• v.17 no.6
• /
• pp.523-529
• /
• 2016

Stereo matching algorithm is an essential part in computer vision and photography. Accuracy and computational complexity are challenges of stereo matching algorithm. Much research has been devoted to stereo matching based on cost volume filtering of matching costs. Local stereo matching based guided image filtering (GIF) has a computational complexity of O(N), but is still not enough to provide real-time 3-dimensional (3-D) video services. The proposed algorithm concentrates reduction of computational complexity using the concept of fast guided image filter, which increase the speed up to $O(N/\small{s}^2)$ with a sub-sampling ratio $\small{s}$. Experimental results indicated that the proposed algorithm achieves effective local stereo matching as well as a fast execution time for 3-D video service.

• New & Renewable Energy
• /
• v.16 no.1
• /
• pp.31-40
• /
• 2020

Most countries in the world are trying to reduce the use of fossil fuels in the production of electricity and replace them with renewable energy technologies. In Korea, there are abundant ocean renewable energy sources that will play an important role in power generation in the future. This paper introduces a new tidal energy converter utilizing flow induced vibration (FIV), which can work efficiently, even in the currents slower than 1.0m/s. All tests were conducted at the Marine Renewable Energy Laboratory at the University of Michigan to examine the effects of the damping ratio of the electric generators on the power outputs and power efficiencies. In these tests, two identical circular cylinders were used, and passive turbulence controllers were applied to the surface of the cylinders to enhance the FIV. The experimental results showed that by using the two cylinders in the FIV, the power output and efficiency reached up to 31 W and 36%, respectively. In particular, the results showed that the power efficiency was higher at the relatively low flow speed (4