• 대한조선학회논문집
• /
• 제57권3호
• /
• pp.160-167
• /
• 2020

A two-stroke diesel engine and a propeller normally adopted in large merchant ships are regarded as major ship vibration sources. They are directly connected and generate various excitation components proportional to the rotating speed of diesel engine. Among the components, the magnitude of two excitation components with the same frequency generated by both engine and propeller can be compensated by the adjustment of their phase difference. It can be done by the optimization of propeller assembly angle but requires a number of burdensome trials to find the optimal angle. In this paper, the efficient estimation method to determine optimal propeller assembly angle is proposed. Its application requires the axial vibration measurement in sea trial and the numerical vibration analysis for propulsion shafting which can be substituted by additional vibration measurement after one-trial modification of propeller assembly angle. In order to verify the validity of the proposed method, the phase difference between two fifth order excitation components generated by both diesel engine and propeller of a real ship is calculated by the finite element analysis and its result is indirectly validated by the comparison of axial vibration responses at intermediate shaft obtained by the numerical analysis and the measurement in sea trial. Finally, it is numerically confirmed that axial vibration response at intermediate shaft at a resonant speed can be decreased more than 87 % if the optimal propeller assembly angle determined by the proposed method is applied.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.90-97
• /
• 2004

DC motor requires a rotor speed sensor for accurate speed control. The speed sensors such as resolvers and encoders are used as speed detectors. but they increase cost and size of the motor and restrict the industrial drive applications. So in these days. many Papers have reported on the sensorless operation or DC motor(3)-(5). This paper Presents a new sensorless strategy using neural networks(6)-(8). Neural network structure has three layers which are input layer. hidden layer and output layer. The optimal neural network structure was tracked down by trial and error and it was found that 4-16-1 neural network has given suitable results for the instantaneous rotor speed. Also. learning method is very important in neural network. Supervised learning methods(8) are typically used to train the neural network for learning the input/output pattern presented. The back-propagation technique adjusts the neural network weights during training. The rotor speed is gained by weights and four inputs to the neural network. The experimental results were found satisfactory in both the independency on machine parameters and the insensitivity to the load condition.

• Smart Structures and Systems
• /
• 제30권3호
• /
• pp.303-315
• /
• 2022

The degradation of wheel tread may result in serious hazards in the railway operation system. Therefore, timely wheel defect diagnosis of in-service trains to avoid tragic events is of particular importance. The focus of this study is to develop a novel wheel defect detection approach based on the relevance vector machine (RVM) which enables online detection of potentially defective wheels with trackside monitoring data acquired under different running-speed conditions. With the dynamic strain responses collected by a trackside monitoring system, the cumulative Fourier amplitudes (CFA) characterizing the effect of individual wheels are extracted to formulate multiple probabilistic regression models (MPRMs) in terms of multi-kernel RVM, which accommodate both variables of vibration frequency and running speed. Compared with the general single-kernel RVM-based model, the proposed multi-kernel MPRM approach bears better local and global representation ability and generalization performance, which are prerequisite for reliable wheel defect detection by means of data acquired under different running-speed conditions. After formulating the MPRMs, we adopt a Bayesian null hypothesis indicator for wheel defect identification and quantification, and the proposed method is demonstrated by utilizing real-world monitoring data acquired by an FBG-based trackside monitoring system deployed on a high-speed trial railway. The results testify the validity of the proposed method for wheel defect detection under different running-speed conditions.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.723-735
• /
• 2018

Linear proportional-integral (PI) controllers are an attractive choice for controlling the speed of induction machines because of their simplicity and ease of implementation. Fractional-order PI (FO-PI) controllers, however, perform better than PI controllers because of their nonlinear nature and the underlying iso-damping property of fractional-order operators. In this work, an FO-PI controller based on the proposed first-order plus dead-time induction motor model and integer-order (IO) controllers, such as Ziegler-Nichols PI, Cohen-Coon PI, and a PI controller tuned via trial-and-error method, is designed. Simulation and experimental investigation on an indirect field-oriented induction motor drive system proves that the proposed FO-PI controller has better speed tracking, lesser settling time, better disturbance rejection, and lower speed tracking error compared with linear IO-PI controllers. Our experimental study also validates that the FO-PI controller maximizes the torque per ampere output of the induction machine and can effectively control the motor at low speed, in field-weakening regions, and under detuned conditions.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1653-1661
• /
• 2008

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. In the area of wayside structure, the stability of track structure and train run shall be evaluated through the review of impact by increased speed by developed train on track structure. The study thus was intended to evaluate the impact on track while a tilting train is running the conventional line(ballast track), which is vulnerable to accelerated train speed. The evaluation of tilting train test running the part of Honam line was conducted to identify the impact on existing track performance by tilting train. To identify the performance of each part of track components while tilting train and high speed train were running the existing line, wheel load, rail bending stress, vertical displacement of rail and sleeper were compared so as to evaluate the expected impact by tilting train for improving the train speed.

• 대한조선학회논문집
• /
• 제44권6호
• /
• pp.572-578
• /
• 2007

A Rigid Inflatable Boat (RIB) is now widely used for commercial and military purpose. In this paper, it is supposed that seven-meter-class RIB be used as an unmanned target ship for naval training. In order to develop many tactical maneuvering patterns of a target ship, a simple horizontal maneuvering model of a RIB is needed. Therefore, models of speed and yaw rate are constructed as the first-order differential equations based on Lewandowski#s empirical formula for steady turning circle diameter of a conventional planning hull. Some parameters in the models are determined using the results of sea trial tests. Finally, proposed models are validated through the comparison of the simulation result with the sea trial result for a specific scenario. Even though a simple model does not represent the horizontal motion of a RIB precisely, however, it can be used enough to develop tactical trajectory patterns.

• 한국콘텐츠학회논문지
• /
• 제21권12호
• /
• pp.302-309
• /
• 2021

구간과속단속시스템은 시점 순간속도, 종점 순간속도, 구간 평균속도를 측정하여 가장 많이 과속한 부분에 대해서만 과태료를 부과하는 방식으로 관련 연구 자료에 따르면 해당 시스템을 적용한 도로에서 속도 및 사고 감소 효과가 있는 것으로 알려져 있다. 하지만 도로교통법에 따라 시스템의 대부분은 고속도로에 설치되어 기존의 연구는 고속도로 구간을 대상으로 수행되어 왔다. 본 연구에서는 관련법령 개정에 따라 일반국도에도 구간과속단속시스템의 설치가 확대될 것으로 예상 되는 바 일반국도 자동차전용도로인 국도3호선 성남이천로에 설치된 구간과속단속시스템을 대상으로 ITS 수집 및 운영 자료를 활용하여 설치 전, 시범운영기간, 단속이후로 구분하여 통행속도, 통행속도에 대한 표준편차 및 교통사고 감소여부를 분석하였다. 분석결과 설치 후 통행속도, 표준편차, 교통사고는 각각 13%, 25%, 70% 감소하여 구간과속단속시스템 설치가 사고감소에 기여하는 바가 큰 것으로 확인되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.614-616
• /
• 2004

It is waste of time in industrial plant that the PI controller gain tuning. The PI controller has many trial-and-error steps for gain design. This paper proposes the optimum gain design of PI controller using a speed estimation in sensorless vector-control. In this method, a degree of stability and Hurwitz theory are applied and the controller gain is expressed by system parameters.

• 기술사
• /
• 제34권1호
• /
• pp.27-34
• /
• 2001

On 16Dec. 1999, It was 100 years since the opening the first railroad section of 33.2km on Sep. 1899, Korea High Speed Railroad had a successful trial run of 200km/h on test track section. And the test speed 300km/h was achieved an 28 June 2000 during continuous commissioning. In the 21st century, the High Speed Railroad will be opened commercially in Korea and will contribute to technical development. Now, it is necessary to re-evaluate the role of railroad in modern society and to activate the railroad system. Ultimately, the competitive power of nation will be strengthened with energy saving, reduction of pollution and transportation cost. It conclusion the railroad system have to be expaned about 50% of total transportation to make preparations for reopening of Eurasia silk route through KyungEu railroad connection.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권12호
• /
• pp.616-623
• /
• 2003

Conventional P/PI speed controller of today's servo drives should be manually tuned the controller switching set-point by trial-and-errors, which may translate the drive system down-time and loss of productivity. The adjustable drive performance is heavily dependent on the quality of the expert knowledge and becomes inadequate in applications where the operating conditions change in a wide range, i.e., tracking command, acceleration/deceleration time, and load disturbances. In this paper, the demands on simple controls/setup are discussed for industry servo drives. Analyzing the frequency content of motor torque command, P/PI control mode switching is automatically performed with some prior knowledge of the mechanical dynamics. The dynamic performance of the proposed scheme assures a desired tracking response curve with minimal oscillation and settling time over the whole operating conditions. For comprehensive comparison of traditional P/PI control scheme, extensive test is carried out on actual servo system.