• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.3
• /
• pp.85-95
• /
• 1997

The design work for the next generation of 300 passenger super high - speed foil catamaran ship has been performed in this study utilizing the accumulated technology and the acquired know - how. The study has been so successfully completed that the performance characteristics confirmed by the model tests are much superior to those of the design target. The construction and the sea trial of the super high - speed foil catamaran passenger ship designed in this study has been completed already. It is the authors' plan to present the sea trial results in the near future.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.396-404
• /
• 2021

It is important to verify that the contracted speed-power performance of a ship is satisfied in sea trials. International Organization for Standardization (ISO) has published the procedure for measuring and assessing ship speed during sea trials. The results obtained from actual sea conditions inevitably include various uncertainty factors. In this study, double run tests were performed on one container ship to analyze the uncertainty of sea trial on three maximum continuous rating conditions. The uncertainty factors and scale of uncertainty were examined based on the measured raw data during sea trial. The results indicate that the expanded uncertainty for ideal power performance is approximately ±1.4% at 95% confidence level (coverage factor k = 2) and most of the uncertainty factors were because of the shaft power measurement system.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.4
• /
• pp.421-428
• /
• 2012

The purpose of this study was to verify the effects of developed assisting wear which maximize trunk(back) muscle's stretch-shortening effect during backswing and downswing for increasing golf ball carrying distance. Design and fabrication of assistive wear were performed based on the results of analyzed data of trunk EMG activity from the golf drive swings of elite professional male golfers during back swing and downswing phases. After the prototype of wear was produced, surface EMG and Flight scope tests were conducted to verify the effectiveness of the wear for increasing distance to the professional golfers. Results indicated that wearing trial showed significant longer carry distance than the non-wearing trial(p<.001). The carry distance of wearing trial showed an average 229 m compared to the non-wearing trial, the average 225 m. The swing with wearing also produced significantly faster ball speed than the trial without wearing(p<.05). Average 245 Km/h and 244 Km/h were produced for the swing with and without wearing trails, respectively. EMG results also indicated that the muscle activity of left psoas was significantly increased for wearing trial during downswing and near the impact. Thus, this may affect positively to increase club head speed. The activity of the left latissimus dorsi was dramatically increased during the final stage of swing. This generates elongation effect for longer follow-through and increased impulse between club and ball so eventually valid assistance to increase carry distance. Therefore, the developed assisting wear was proved to be effective tool for increasing golf ball carry distance with maximizing trunk(back) muscle's stretch-shortening effect during backswing and downswing.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.54-61
• /
• 2001

It is expected that ISO issue a standard method for sea trial and the correction of data taken during speed trial. One of the major reason for this effort(or trend) is to get reliable and accurate sea trial measurement. With the same philosophy, SHI(Samsung Heavy Industries) developed a nautical signal integrated unit in 1996. Two years after this, SHI developed a software that enable the user to analyze the sea trial measurement on-board. After a series of stationary and performance tests, KR has issued a certificate for international application of the software. We have been utilizing this program for the measurement and analysis of sea trial of more than 70 ships built in SHI shipyard. However, one critical defect of the software has been that it can be applied only for single shaft vessels. In this short paper, we would like to introduce a new version of the software which can be used for both single and multi thruster vessels. This paper deals with the introduction, test method and some of the test result.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1351-1354
• /
• 2005

Recently, as the feasibility study shows that trans-Korea railway and trans-continental railway are advantageous, interest in high speed railway system is increasing. Because railway vehicle is environment-friendly and safe compared with airplane and ship, its market-sharing increases gradually. Korean High Speed Train has been developed by KRRI for last 7 years to satisfy the need. Korean High Speed Train (350km/h), composed of 2 power cars, 2 motorized car and 3 trailer cars, has been developed and is under trial test. To verify the design requirements for the functions and traction performances of the train, KRRI (Korea Railroad Research Institute) decided to evaluate traction performances of the train during trial test. For this purpose, torque, velocity, voltage and current must be measured. KRRI has developed a measurement system that can measure vast and various signals effectively. In this paper, we introduce traction performances of Korean High Speed Train. The traction measurement items are focused on the verification of motor block performances. Motor block consists of 2 motors. By this test, we verified traction performances of Korean High Speed Train

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.453-459
• /
• 2020

A sea trial of the speed performance test is the one of the most important means of verifying a ship's performance, and the International Organization for Standardization established a standard for this test in 2015. Environmental disturbances such as wind and waves are always present under real sea conditions, however, so it is impossible to accurately estimate delivered horsepower under ideal conditions. These disruptive influences also make it difficult to evaluate the positive effect of recently developed energy-saving devices. In this study, uncertainty analysis of improved speed performance was carried out using Monte Carlo simulation to confirm the energy-saving efficiency of a ship equipped with an air-lubrication system. The findings showed the average power saving to be 3.2%, with the expanded uncertainty of ± 2.7% at a 95% confidence level (k=2).

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.593-600
• /
• 2014

Information supporting system which is based on real-time prediction of currents to be applicable to the sea trial test of ship is developed. In the system, the spatial distribution of currents at specific time and the trends of variability of currents occurring at specific sites are also given as valuable information for sea trial test of ship. In addition, the system has a capability to connect with a GPS which provides information including speed loss of the ship caused by currents on the way of voyage. With information from the sea trial test, the system is also capable of delivering optimum time and pathways by considering calculated speed loss of ship at specific time and its pathway. Having information described as above, the real-time current prediction system supports and provides functions of not only running the test in an efficient way but also providing valuable information which is encouraged to be used during the test by installing at the ship.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.293-304
• /
• 2024

In this paper, efficient and reliable methodologies for conducting sea trials to evaluate the performance of hull-mounted sonar systems is discussed. These systems undergo performance verification during ship construction via sea trials. However, the evaluation procedures often lack detailed consideration of variabilities in detection performance due to seabed topography, seasonal factors. To resolve this issue, temperature and salinity structure data were collected from 1967 to 2022 using ARGO floats and ocean observers data. The paper proposes an efficient and reliable sea trial method incorporating Bellhop modeling. Furthermore, a machine learning model applying a Physics-Informed Neural Networks was developed using the acquired data. This model predicts the sound speed profile at specific points within the sea trial area, reflecting seasonal elements of performance evaluation. In this study, we predicted the seasonal variations in sound speed structure during sea trial operations at a specific location within the trial area. We then proposed a strategy to account for the variability in detection performance caused by seasonal factors, using results from Bellhop modeling.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.21-30
• /
• 2005

The purpose of this study is helps to make full use for perfect performance by grasping the defects of Tichonkich motion performed by athlete CSM For this, the study analyzed kinematical variables through Tichonkich motions performed at the first selection competition(1st trial) and final selection competition(2nd trial) for the dispatch to the 28th Athens Olympic Games using the three-dimensional cinematographical method with a high-speed video camera, and obtained the following results. 1. During Tichonkich motion, the execution time of up swing and the right hand moving to the left bar was shorter in the 2nd trial than the 1st one, while the execution time of down swing, the support of the left bar and the right hand moving to the right bar was longer in the 2nd trial than the 1st trial. 2. The horizontal position of COG in the 2nd trial was -35cm in the 1st stage, 42cm in the 3rd stage and 29cm in the 4th stage, that is, it showed a great swing focused on the circular movement compared to the 1st trial, while the vertical position of COG was -59cm in the 2nd stage, that is, it showed a small swing focused on a up and down movement. Also the 5th stage vertical position was 98cm, and the 6th stage vertical position was 95cm in the 2nd trial which were higher than those of the 1st trial, so it has provided magnificence required in the modern gymnastics. 3. And it was indicated that the horizontal velocity at the down swing phase proceeded forward more rapidly in the 2nd trial than that in the 1st trial, and the reverse ascent made a rapid vertical rise lessening left and right velocity change. And in the 5th stage, the 2nd trial was kept very slower in horizontal, vertical and left and right velocity that in the 1st trial, so it reached a handstand with leisurely movement. 4. In the 2nd trial, shoulder joint of the 1st, 2nd, 3rd stages kept a larger angle than that in the 1st trial, that is, it made a great swing while in the 1st trial, it showed a swing movement dependent on kick movement by the flexion and extension of hip joint. Also in the 2nd trial, the body formed a vertical posture with both hands supporting the left bar and hip joint was kept larger as $198^{\circ}$ and $190^{\circ}$ in the 5th and 6th stage than that in the 1st trial, so it made a handstand with the body uprightly stretched out, and magnificent and stable movement.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.128-128
• /
• 2017