• 한국산업정보학회논문지
• /
• 제24권6호
• /
• pp.35-42
• /
• 2019

본 논문에서는 TBM(Tunnel boring machine) 시스템의 기동 특성향상을 위해 기존에 제안되었던 회생기동방법에 대한 실제적으로 발생되는 문제점을 분석하고, 이에 대한 해결방법을 제안한다. 기존의 연구결과에서 나타나는 속도리플 문제를 해결하기 위하여, 우선 시스템 상에서의 발생하고 있는 문제점을 분석하고, 이를 보완할 수 있는 방법을 제시하였다. 개선된 방법을 실제 시스템에 적용하여 기존의 시스템 결과와 비교함으로써 제안된 방법이 효과적임을 검증하였다.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.726-733
• /
• 2011

BLDC Motors are widely used in various speed control applications due to their ease of control and low cost. Generally, the unipolar PWM method is used for speed control applications. However, the unipolar PWM method has a current spike problem in the braking operation which can be a problem in speed reversal which generally happens in position control applications. However, the current spike problem can be solved by the conventional bipolar PWM method. Although the current spike problem can be solved, the conventional bipolar PWM method has the problem of a large current ripple. In this paper, a novel bipolar PWM method is proposed to solve this problem. The current ripple and the current spike problems are analyzed in this paper for the unipolar and bipolar PWM methods. At last, the merits of the proposed bipolar PWM method are proven by experiment.

• 전자공학회논문지T
• /
• 제35T권1호
• /
• pp.90-98
• /
• 1998

본 논문은 유도전동기를 저속에서 강건하게 제어할 수 있도록 개선된 벡터 제어에 관한 연구이다. 유도전동 기가 정격 속도의 10% 이하인 저속에서 구동될 경우 고조파에 의하여 발생하는 단위 벡터각 오차를 보상하는 알고리즘을 제안하였다. 또한 저속 및 과도상태에서 회전자 파라미터 변화에 대하여 강건하게 운전하도록 회전 자 시정수에 동조하는 알고리즘을 제시하였다. 제안한 벡터 제어를 이용하여 자속과 토오크 리플을 감소시킴으로써 저속에서 안정된 출력특성을 얻을 수 있었다. 입출력이 정현적인 상태일 때, 제안한 벡터 제어와 직접 벡터 제어 및 간접 벡터 제어의 저속 특성을 비교 분석하였고, 고조파가 함유된 상태에서 각각의 제어 특성을 비교 분석하였다. 그리고 회전자 시정수의 추종 성능은 시뮬레이션으로 확인하였다. 전체 제어 시스템을 실제의 하드웨어로 구현하고, 제안한 벡터 제어와 직접 벡터 제어를 비교 분석하였다. 두 제어 기법을 저속에서 실험 한 결과, 정상상태에서 직접 벡터를 기준으로 할 경우 토오크 리플이 45% 개선된 특성을 얻었다. 또한 자속 전류 리플은 0.2 p.u. 감소하였고, 토오크 전류 리플은 0.6 p.u. 감소함을 확인하였다. 그리고 회전자 시정수의 변화에 대하여 동조됨을 확인하였다. 따라서 저속에서 제안한 벡터 제어의 타당성과 강건성을 입증하였다.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.58-66
• /
• 2012

SRMs(Switched Reluctance Motors) are much interested in high speed applications due to the mechanical robustness, simple structure and high efficiency. In spite of many advantages of SRMs, a higher torque ripple discourages the adoption of SRMs in a high speed application. This paper presents a simple negative torque of tail current compensation scheme using a modified TSF(Torque Sharing Function) for the high speed SRMs. Because of the short commutation in the high speed region, the negative torque from the tail current makes the high torque ripple. In order to reduce and compensate the negative torque from tail current, the proposed control scheme produces an additional compensating torque with a reference torque in the active phase winding. And the compensating value is dependent on the tail current of the inactive phase winding. Furthermore, the switching signals of the outgoing phase are fully turned off to restrict the extended tail current, and the torque error of the outgoing phase is compensated by the incoming phase. The proposed modified TSF control scheme is verified by the computer simulations with 30,000[rpm] high speed 4/2 SRM. The simulation and experimental results show the effectiveness of the proposed control scheme.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.341-350
• /
• 2014

The torque ripple of switched reluctance motors (SRMs) is the main disadvantage that limits the industrial application of these motors. Although several methods for smooth-toque operation (STO) have been proposed, STO works well only within a certain torque and speed range because of the constraints of the supply voltage and peak current. Based on previous work that sought to expand the STO range, a scheme is developed in this study to determine the maximum smooth torque range at each speed. The relationship between the maximum smooth torque and speed is defined as the smooth torque speed characteristics (STSC), a concept similar to torque speed characteristics (TSC). STSC can be utilized to evaluate torque utilization by comparing it with TSC. Thus, the concept benefits the special design of SRMs, especially for the generation of smooth torque. Furthermore, the torque sharing function (TSF) derived from the proposed method can be applied to STO, which produces a higher smooth torque over a wider speed range in contrast to four typical TSFs. TSimulation and experimental results verify the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.986-988
• /
• 2001

This paper presents a digitally speed sensorless control system for induction motor with direct torque control (DTC). Some drawbacks of the classical DTC are the relatively large torque ripple in a low speed range and notable current pulsation during steady state. They are reflected speed response and increased acoustical noise. In this paper, the DTC quick response are preserved at transient state, while better qualify steady state performance is produced by space vector modulation (SVM). The system are closed loop stator flux and torque observer for wide speed range that inputs are currents and voltages sensing of motor terminal, model reference adaptive control (MRAC) with rotor flux linkages for the speed fuming signal at low speed range, two hysteresis controllers and optimal switching look-up table. Simulation results of the suggest system for the 2.2 [kW] general purposed induction motor are presented and discussed.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1177-1186
• /
• 2017

This paper presents a torque ripple reduction method of direct torque control (DTC) using fuzzy controller with optimal selection strategy of voltage vectors in a five-phase induction motor. The conventional DTC method has some drawbacks. First, switching frequency changes according to the hysteresis bands and motor's speed. Second, the torque ripple is rapidly increased in long control period. In order to solve these problems, some/most papers have proposed torque ripple reduction methods by using the optimal duty ratio of the non-zero voltage vector. However, these methods are complicated in accordance with the parameter. If this drawback is eliminated, the torque ripple can be reduced compared with conventional method. In addition, the DTC can be simply controlled without the use of the parameter. Therefore, the proposed algorithm is changing the voltage vector insertion time by using the designed fuzzy controller. Also, the optimized voltage vector selection method is used in accordance with the torque error. Simulation and experimental results show effectiveness of the proposed control algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.370-376
• /
• 1993

In this paper, we present the voltage source algorithm for high speed and low torque ripple operation of a switched reluctance motor (SRM). The SRM has simpler structure than the traditional dc or ac motor. It has a high starting torque and can be operated in the wide range of speed. So it can be applied to various areas. But the SRM has some difficulties in driving circuit and controller due to the large inductance variations. In this study, in order to produce the low torque ripple and the high speed operation, a voltage source algorithm is proposed. We showed the good performance of the proposed controller through simulation and experiment.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2182-2191
• /
• 2016

This study proposes a novel frame anti-vibration controller for position sensorless PMSM drive application. This controller is called specific component reduction controller (SCRC). SCRC can function without an accelerometer and can achieve speed variable control. This study mainly comprises the following phases. First, the position sensorless control method will be provided. Second, the frame vibration model and load torque ripple will be shown. Third, SCRC will be discussed and its stability will be analyzed. Finally, experimental results show that SCRC can achieve speed variable anti-vibration control and compensate target frequency torque ripple.

• 전력전자학회논문지
• /
• 제26권4호
• /
• pp.298-301
• /
• 2021

A mechanical angle estimator is presented in this study to achieve the sensorless control of permanent magnet synchronous motor (PMSM) used in driving a reciprocating compressor. Braking the PMSM at a specific mechanical angular position is critical for the silent stoppage of the reciprocating compressor. The performance of conventional mechanical angle observers used in reciprocating compressor drives can be seriously affected according to gains of the speed controller because such observers rely on the magnitude of current ripples. A speed ripple-based mechanical angle estimator is proposed to solve this problem. Experimental results showed the effectiveness of the proposed method.