• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1623-1629
• /
• 2010

The high speed rolling stock system considerably belongs to a special industry which requires large-scale investment cost but the recovery term is long. Therefore, to guarantee risk and possibility of technological success in initial investment, tools concerned with various expecting methods like life cycle costs analysis and credibility management are used. In view of this characteristics, the cases on cost structure for HSR RS previously invested should be studied and the method to appropriately allocate the life cycle of each sub-system like arrangement unit, electric device, braking device, door and car body should be realized. Moreover, the environmental aspects of main manufacturer and parts supplier can be checked. This study, through the case study for HSR cost structure in introduction and operational stage of KTX, aims to seek for the method to adapt to environmental changes like EU railway industry of which object is to acquire global market competitiveness by integrating manufacturing and operation of RS and the regulation and operation of IRIS which is performed in Europe.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1174-1175
• /
• 2008

A operation scheme to regulate the active power output of the hybrid system consisted of a doubly fed induction generator(DFIG) and a fuel-cell are presented. The power output of the wind turbine fluctuates as the wind speed varies and the slip power between the rotor circuit and power converter varies as the rotor speed change. A fuel cell system can be individually operated and adjusted output power. In this paper, a fuel-cell is performed to regulate the active output power in comparison with the active power output of a DFIG. Based on PSCAD/EMTDC power system tools, we simulated a DFIG and a fuel cell and investigated about dynamics of the output power in hybrid system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.233-233
• /
• 2000

Direct torque control (DTC) scheme provides a very quick torque response without the complex field-orientation block and inner current regulation loop. DTC is known as an appropriate scheme for high power induction motet drives because it can be used at lower switching frequency. There are two major drawbacks with the application of DTC schemes : one is large current harmonics due to flux drooping in a low speed range, the other is that the inverter switching frequency is varying according to motor parameters and operating speed. Switching devices in the power electronics drives should be supported for relatively high switching frequency. In this paper, a P-type fuzzy controller to realize the variable switching sector scheme and a PID-type fuzzy switching frequency regulator are adopted. A meaningful contribution of this paper is to propose a simple realization scheme of the fuzzy switching frequency regulator. Simulation results show the effectiveness of those propositions.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.3
• /
• pp.487-499
• /
• 2008

This study was analyzed and assessed the environmental factors on small marine ranching sites around Gunsan Coast, West Sea of Korea. Standards of assessment are followed in the reports on the choice of marine ranching sites and regulation factors of proper site on marine artificial reefs of MOMAF. Max. current speed around Gunsan were ranged between 25.52 ~ 57.49cm/sec. These values were satisfied by comparing assessment factor such as current speed.. Factors of temperature, salinity, transparency and pH were evaluated as the proper extent. DO was not distributed as the proper extent due to different criterion. between the same assessment factor. COD, SS and nutrients were partly suited to the criteria. Especially, SS was almost higher than that of criterion. So, we are proposed to be reflected in environment characteristics of West Coast such as SS. Moreover, the extent of pollution load factors have to be specified clearly in the regulations of assessment criteria.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.101-108
• /
• 2008

The dynamic behavior of railway bridges originates from dynamic properties of various spans and structural types. As a result, the exact estimation of dynamic properties of the railway bridge can produce the exact estimations of dynamic performances of the railway bridge. The damping ratio affects the dynamic reponses of the railway bridge in the vicinity of the critical speed seriously. Eurocode, National Annex of each European country and Japan have their own specification for the damping ratio for the estimation of dynamic performance of railway bridges. In our case, the specification for Honam high speed railways follows the Eurocode. In the present study, for the verification and regulation of the damping ratio and investigation of various dynamic properties, modal tests of various structural types are performed. In addition, for the investigation of effects of track structures on the dynamic property of the bridge, ballast track and concrete track are installed and tested.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.221-223
• /
• 1997

This paper deals with the slip power recovery system using switch mode converter in the inverter DC side, which recovers slip power of induction machine to AC line with the aid of the boost converter. As a results, the motor speed can be controlled by the duty ratio of boost switch, not by inverter firing angle. This results that the reactive power produced by phase controlled inverter and diode rectifier can be greatly reduced and linear speed regulation can be obtained. Moreover, the harmonic components of line current caused by the commutation in inverter and rectifier can be considerably suppressed. Therefore, most of the problems in conventional system can be solved.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.581-583
• /
• 2005

The paper is final report for speed control upgrade and analysis report which recently performed on PWR NPP safety related EDG KHNP Ulchin NPP No.2 Unit. The upgraded system includes more beneficial function like as 'Slow start with starting ramp', 'Generator load sensing & control capability' and 'Emergency ramp during slow start'. This paper shows functional operation of slow start regime according to NRC regulatory guide which guide regulation to NPP safety related environment.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.3
• /
• pp.154-160
• /
• 2004

In this paper, a combined field orientation and adaptive backstepping approach using a sliding mode adaptive flux observer, is proposed for the control of induction motor In order to achieve the speed regulation with the consideration of improving power efficiency, rotor angular speed and flux amplitude tracking objectives are formulated. Rotor flux and inverse time constant are estimated by the sliding mode adaptive flux observer based on a fixed stator frame model and mechanical lumped uncertainty such as inertia moment, load torque disturbance, friction compensated by the adaptive backstepping based on a field-oriented model. Simulation results are provided to verify the effectiveness of the proposed approach.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.123-124
• /
• 2015

Recently interest on DC systems has been grown up extensively for more efficient connection with renewable energy. During the operation, there happens DC_link voltage variations. This paper focuses on the DC voltage stabilization applied in stand-alone DC microgrid to improve the system stability by keeping the voltage within limits. Batteries and a variable speed diesel generator cover the shortage of power after all available renewable energy is consumed. Load shedding or power generation reduction should automatically takes place if the maximum tolerable voltage variation is exceeded. PSIM based simulation results are presented to evaluate the performance of the proposed control measures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.9
• /
• pp.877-882
• /
• 1991

The idea of expert control is to incoporate a rule based expert system in a feedback control system. In this paper, We present some heuristic rules about input regulation and supervision and turning for D.C. servo motor speed control. The expert auto-turning PID Controller which Heuristic rules are used as an element of the feedback control system is implemented with the numerical algorithms and Heuristic logics. The robust and accurate control function is confirmed by computer simulation..