• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1685-1690
• /
• 2010

This paper describes the calculation and application of the speed profile for the train speed control when the train is operated by ATO(Automatic Train Operation). We propose a speed profile calculation method considering the speed limitation and the jerk limitation, in order to maintain the quality of the train automatic operation. In previous works, ATO calculates a desired speed profile along the time, and controls the train to follow the profile. In this case, it may be hard to follow the restrictive speed along the location or to stop the train with a low location error, because of the difference between the desired location at each time and the real location of the train due to the control error. In the proposed method in this paper, we calculate a desired speed profile along the time considering the speed and jerk limitation first, and derive a speed profile along the location using it. If the restrictive speed profile is changed or the train speed strayed from the speed profile, ATO system calculates new speed profile and applies it immediately. Because ATO system controls the train speed based on the train location, the accuracy of the train location control can be improved. A simulation system for the test of the automatic train operation using this method is designed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1092-1099
• /
• 2011

This paper is concerned with the ATO speed profile generation method in the moving block system. The ATO speed profile is calculated using the acceleration limit and the jerk limit to improve ride comfort. In addition, the speed limit and stop distance provided from ATP profile should be considered to ensure safety. In the moving block system, the speed limit and the stop position are frequently changed in real-time. Therefore, the ATO speed profile should be regenerated immediately according to change of the speed limit and the stop position, within the acceleration limit and the jerk limit. In this paper, the ATO speed profile generation method is proposed, which considers not only frequent changes of the speed limit and the stop position but also acceleration limit and jerk limit. Futhermore the simulation result is presented to verify usefulness of this method.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.551-558
• /
• 2011

To analyze the effect of wear of wheel profile on the running stability of rolling-stock, theoretical and experimental studies were conducted on the profiles used in conventional lines. In experiment using 1/5 scale model to verify the results of the theoretical analysis, the test results of the critical speed for worn wheel profile samples show similar trend. In case of the conical type wheel profile(Profile 40), the equivalent conicity is increased with flange wear. But in case of the arc type wheel profile(Profile 20h), the equivalent conicity is decreased with flange wear. And the critical speed of the bogie was inverse proportion to the equivalent conicity. It is shown that the variation of the critical speed with the wheel wear could be changed according to the design concept and wear pattern of wheel profile. Results of the theoretical and experimental studies are discussed here.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.103-111
• /
• 2013

PURPOSES : Previous Speed Profile reflects the patterns of speeds in sections of tangents to curves in the roads. However these patterns are uniform of speeds and Acceleration/Deceleration. In oder to supplement these shortcomings. this study made a new profile which can contain factors of Acceleration/Deceleration through theories of Previous Speed Profiles. METHODS : For sakes, this study developed the speed prediction model of Rural Multi-Lane Highways and calculated Acceleration/Deceleration by appling a Polynomial model based on developed speed prediction model. Polynomial model is based on second by second. Acceleration/Deceleration Profile is developed with the various scenarios of road geometric conditions. RESULTS : The longer an ahead tangent length is, The higher an acceleration rate in curve occurs due to wide sight distance. However when there are big speed gaps between two curves, the longer tangent length alleviate acceleration rate. CONCLUSIONS : Acceleration/Deceleration Profile can overview th patterns of speeds and Accelerations/Decelerations in the various road geometric conditions. Also this result will help road designer have a proper guidance to exam a potential geometric conditions where may occur the acceleration/deceleration states.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.135-142
• /
• 1997

New approach to determine thd design of automotive tire profile was introduced. In this study, design technology for tire profile was combined with a finite element method to improve high speed durability. Static and dynamic behavior analysis of new concept tire was compared with conventional tire profile. To obtain the improved tire performance, appropriate design values, ie. design methodology, section profile selection, material properties, are needed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.91-92
• /
• 2006

High precision speed reducer which has a cycloid or involute teeth profile, used to in Robot. In this study, suggest to a new teeth profile, which has basically a triangle teeth profile. We had a stress analysis compare to convenient speed reducer for teeth profile. We has a good results in new teeth profile for strength, stress and stiffness.

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.6274-6281
• /
• 2015

무선통신기반 열차제어시스템은 차상과 지상과의 양방향 무선통신을 기반으로 실시간 열차간격제어가 가능하므로 운전시격 단축 효과가 있으며 궤도회로를 사용하지 않기 때문에 설비투자를 절감 할 수 있다. 무선통신기반 열차제어시스템에서 가장 중요한 부분인 자동열차방호(ATP: Automatic Train Protection)는 실시간 열차위치 추적을 기반으로 선행열차와 후행열차간의 안전한 간격제어를 수행한다. 본 논문은 도시철도용 무선통신기반 열차제어시스템의 열차간격제어를 위한 전체적인 ATP 열차간격제어 알고리즘과 ATP의 처리속도 향상을 위해 전처리 기반 속도프로파일 계산 알고리즘을 제안한다. 제안된 속도프로파일 계산 알고리즘은 사전에 선로와 열차의 영구속도제한에 해당하는 프로파일을 미리 계산하여 가장제한적인 속도프로파일로 활용한다. 만약 운행 중 특정 노선 구간에 임시속도제한이 발생하는 경우 미리 계산된 영구속도프로파일에 임시속도제한을 반영하여 해당 구간의 속도프로파일을 업데이트함으로써 계산효율을 높일 수 있다. 제안된 속도프로파일 계산 알고리즘의 성능을 평가하기 위해 시간복잡도 O-notation으로 분석하였으며 그 결과 기존에 비해 시간 복잡도를 개선할 수 있음을 확인하였다. 또한 ATP 열차간격제어 검증을 위해 열차간격제어 시뮬레이터를 제작하였으며 실험결과를 통해 다양한 운영상황에서 안전한 열차간격제어가 이루어지고 있음을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.17-18
• /
• 2012

Generally, speed control system is used to control the elevator door. The whole speed profile must be installed in the speed controller of the door control system. However, it is not easy to modify the speed profile when door opening size and time are changed. In this paper, the making speed profile is discussed by the door opening size and time. The position control algorithms of PMSM for elevator door system are compared with general speed control, position control method with speed controller, and position control with speed command feedforward compensation by simulation using MATLAB/SIMULINK.

• 한국정밀공학회지
• /
• 제27권8호
• /
• pp.13-19
• /
• 2010

A design method of railway wheel profile with objective function of equivalent conicity considering wheel dimension constraint, two points contact problem between wheel and rail was proposed. New design method shows good results. New wheel profile generated from optimization process shows better dynamic performance compared with initial profile as the purpose of wheel profile design. And to verify the design method with testing the stability of new wheel profile, we conducted a critical speed test for new wheel profile using scale model applied scaling method of railway vehicle dynamics. The result of critical speed test show good agreement with that of numerical analysis. From the above results, it is seen that the design method with objective function of equivalent conicity is feasible and it could be applied to design new wheel profile efficiently.

• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1099-1107
• /
• 2009

Numerical simulation and experimental study to evaluate the critical speed of the railway bogie according to the tread inclination of wheel profile were conducted using 1/5 scale model. It has been shown that the results of the critical speed analysis for the scale bogie model is very close to the test results using scale bogie model and the critical speed is decreased in proportion to the increase of equivalent conicity of wheel profile. Results of this study show that the scale model could be applied to research area relating to vehicle stability as an alternative to overcome the experimental problems caused by full scale test on the roller rig.