• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.188-194
• /
• 2000

This study is about fault detection and fault area detection of LV circuit in Cab Cubicle system which have control of train to keep safety in High Speed Train. LV circuit is operated with diagnosis system like safety system. In this paper, we suggest a design and an implementation method to detect fault or to detect fault area automatically about LV circuit. The implemented system is tested successfully after implementation of some function. We expect reduction to diagnosis area or repair time by fault area module

• 대한전자공학회논문지SD
• /
• 제39권5호
• /
• pp.74-86
• /
• 2002

본 논문은 결정 궤환 구조를 갖는 차동 위상 검출기의 고속 데이터 처리를 위한 VLSI 구조를 제안한다. 기존 차동 위상 검출 방식의 낮은 BER 성능을 극복하기 위해 DF-DPD, DPD-RGPR, DFDPD-SA 등의 다중 심볼 검출 방식이 제시되었다. 이러한 검출 방식들은 참조 위상으로 사용되는 이전 심볼에서의 잡음 효과를 작게 하기 위하여 검출된 위상을 궤환시키는 구조를 갖고 있다. 하지만, 검출된 위상을 궤환시키는 작용은 데이터 처리 속도를 기존의 차동 위상 검출기보다 느리게 한다. 본 논문에서는 결정 궤환 구조를 갖는 차동 위상 검출기가 기존의 차동 위상 검출 방식처럼 고속으로 데이터를 처리할 수 있는 VLSI 구조를 제안하였다. 제안된 구조는 'M-1' 번째 과정에서 'M' 번째 과정을 미리 계산하는 선계산(pre-calculation) 방식과 'M-1'번째 과정에서 예견 위상들을 궤환시키는 선결정 궤환(pre-decision feedback) 방식을 갖는다. 본 논문에서 제안된 구조는 VHDL(Very-high-speed-IC Hardware Description Language)를 사용하여 RTL(Register Transfer Level)로 구현되었다. 시뮬레이션 결과, 제안된 구조는 고속으로 데이터를 처리함을 확인하였다.

• 전자공학회논문지B
• /
• 제30B권12호
• /
• pp.12-20
• /
• 1993

In a conventional adaptive echo canceller, an ADF(Adaptive Digital Filter) with TDL(Tapped-Delay Line) structure modelling the echo path uses the LMS(Least Mean Square) algorithm to compute the coefficients, and NET detector using energy comparison method prevents the ADF to update the coefficients during the periods of the NET signal presence. The convergence speed of the LMS algorithm depends on the eigenvalue spread ratio of the reference signal and NET detector using the energy comparison method yields poor detection performance if the magnitude of the NET signal is small. This paper presents a new adaptive echo canceller which uses the pre-whitening filter to improve the convergence speed of the LMS algorithm. The pre-whitening filter is realized by using a low-order lattice predictor. Also, a new NET signal detection algorithm is presented, where the start point of the NET signal is detected by computing the cross-correlation coefficient between the primary input and the ADF output while the end point is detected by using the energy comparison method. The simulation results show that the convergence speed of the proposed adaptive echo canceller is faster than that of the conventional echo canceller and the cross-correlation coefficient yields more accurate detection of the start point of the NET signal.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4240-4258
• /
• 2016

A practical iterative channel estimation technique is proposed for the multiple-input-multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) system in the high-speed mobile environment, such as high speed railway scenario. In the iterative algorithm, the Kalman filter and data detection are jointed to estimate the time-varying channel, where the detection error is considered as part of the noise in the Kalman recursion in each iteration to reduce the effect of the detection error propagation. Moreover, the employed Kalman filter is from the canonical state space model, which does not include the parameters of the autoregressive (AR) model, so the proposed method does not need to estimate the parameters of AR model, whose accuracy affects the convergence speed. Simulation results show that the proposed method is robust to the fast time-varying channel, and it can obtain more gains compared with the available methods.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권6호
• /
• pp.299-306
• /
• 2000

The primary cause of air pollution by vehicles is imperfect combustion of fuel. One of the most usual causes of this imperfect combustion is the misfire in IC(Intenal Combustion) engine. Recently it is obligated for an ECU to monitor the emission level and warn the driver in case of exceeding specified emission standards. Therefore, in order to comply with this OBD-II regulations, car makers are investing a considerable amount into technology which would enable the detection of misfire and the particular cylinder in which misfire is taking place. So far, it has been able to detect misfire using engine speed, which can be obtained crank angle. However, such a method posed a problem in analyzing at high speed and in recognizing the misfire from the load impact at bumpy road. In this paper, misfire detection is made possible by simple arithmetic using WDFT, especially at high engine speed. In addition, the moving window method of a Walsh function is applied to determine the cylinders under misfire in case of multiple misfires. An actual experiment was conducted to prove that WDFT is applicable to effective in computation speed and to same result in misfire detection and cylinder determination at idle, part load and bumpy road conditions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.955-957
• /
• 1998

Switched reluctance motor(SRM) has the advantages of simple structure, low rotor inertia, and high poer rate per unit volume. However, position sensor isessential in SRM in order to synchronize the phase excitation to the rotor position. The position sensors increase the cost of drive system, and tend to reduce system reliability. This paper investigtes the speed control of sensorless SRM. The proposed system consists of position detection circuit, dwell angle controller, digital logic commutator, PI speed controller and 4-phase inverter. The performances in the proposed system are verified through the experiment.

• 한국정보통신학회논문지
• /
• 제8권1호
• /
• pp.28-33
• /
• 2004

풍속 및 바람 방향의 급격한 변화에 의한 기상위험 현상을 탐지하기 위해서는 공간상에서 풍속의 변화정도를 측정하는 것이 매우 중요하다. 이러한 기상현상들에서 전형적으로 내재된 높은 풍속의 측정을 위해서는 높은 PRF를 갖는 레이다를 필요로 한다. 그러나 공간상의 풍속의 변화정도를 예측하는데 있어서 이러한 큰 풍속의 절대적인 측정값이 꼭 필요한 것은 아니다. 따라서 본 논문에서는 실제적인 측면에서 매우 유용한 낮은 PRF를 갖는 레이다를 이용하여 풍속의 공간 변화율을 얻는 방법을 제안하였다.

• Journal of Information Processing Systems
• /
• 제19권1호
• /
• pp.109-117
• /
• 2023

Defect detection is one of the key factors in fabric quality control. To improve the speed and accuracy of denim fabric defect detection, this paper proposes a defect detection algorithm based on cascading feature extraction architecture. Firstly, this paper extracts these weight parameters of the pre-trained VGG16 model on the large dataset ImageNet and uses its portability to train the defect detection classifier and the defect recognition classifier respectively. Secondly, retraining and adjusting partial weight parameters of the convolution layer were retrained and adjusted from of these two training models on the high-definition fabric defect dataset. The last step is merging these two models to get the defect detection algorithm based on cascading architecture. Then there are two comparative experiments between this improved defect detection algorithm and other feature extraction methods, such as VGG16, ResNet-50, and Xception. The results of experiments show that the defect detection accuracy of this defect detection algorithm can reach 94.3% and the speed is also increased by 1-3 percentage points.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.677-680
• /
• 2003

Perceptual landmarks are an effective solution for a mobile robot realizing steady and reliable long distance navigation. But the prerequisite is those landmarks must be detected and recognized robustly at a higher speed under various lighting conditions. This made image processing more complicated so that its speed and reliability can not be both satisfied at the same time. Color based target detection technique can separate target color regions from non-target color regions in an image with a faster speed, and better results were obtained only under good lighting conditions. Moreover, in the case that there are other things with a target color, we have to consider other target features to tell apart the target from them. Such thing always happens when we detect a target with its single character. On the other hand, we can generally search for only one target for each time so that we can not make use of landmarks efficiently, especially when we want to make more landmarks work together. In this paper, by making use of the moment invariants of each landmark, we can not only search specified target from separated color region but also find multi-target at the same time if necessary. This made the finite landmarks carry on more functions. Because moment invariants were easily used with some low level image processing techniques, such as color based target detection and gradient runs based target detection etc, and moment invariants are more reliable features of each target, the ratio of target detection were improved. Some necessary experiments were carried on to verify its robustness and efficiency of this method.

• 방송공학회논문지
• /
• 제14권2호
• /
• pp.253-264
• /
• 2009

본 논문에서는 실용화를 목적으로 비전 시스템을 기반으로 한 차선검출의 성능개선과 처리과정의 고속화 알고리즘을 제안한다. 차선검출의 고속화를 위해 전처리 과정으로 수평소실선의 추정과 관심영역(ROI-LB)의 최적 선정으로 획기적인 검출영역의 감소가 가능하다. 블록단위의 ROI-LB 내에서 영상의 특징정보를 추출하고 이를 기반으로 한 Hough 변환의 적용에 의한 nonparametric 모델 매칭 기법으로 차선을 검출한다. Laplacian 필터를 사용해서 잡음제거와 동시에 에지 보강 과정을 처리함으로서 다양한 차선 패턴에 대한 특징정보 추출의 신뢰성을 향상시킨다. 또한 ROI-LB 내 블록별 에지의 방향성 정보의 클러스터링으로 차선으로 오인식되는 에지들의 제거가 가능해 차선검출의 성능을 개선할 수 있다. 제안 방법의 유효성을 검증하기 위해 다양한 실제 차선 패턴을 대상으로 한 실험결과를 제시한다.