• Journal of the Korean Society of Combustion
• /
• v.13 no.3
• /
• pp.9-16
• /
• 2008

In this study, a cylindrical constant volume combustion chamber is used to investigate the flow and combustion characteristics of methane-air homogeneous mixture under various initial charge pressure, excess air ratios and ignition times. The flame and burning speed, mean gas speed are calculated by numerical analysis to analyze the combustion characteristics. It is found that the mean gas velocity during combustion has the maximum value around 300 ms and then decreased gradually on the condition of 10000 ms, and that the combustion duration is shorten and flame speed and burning velocity have the highest value under the conditions of an excess air ratio 1.1, an initial charge pressure of 0.2 MPa and an ignition time of 300 ms in the present study. And, the initial pressure and burning speed are in inverse proportion, so that it is in agreement with Strehlow who presented that the initial pressure and burning speed are in inverse proportion when the burning speed is under 50cm/s.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.2
• /
• pp.184-193
• /
• 2014

This paper presents a high performance ZPE(zero-phase-error) speed controller for PMSM(permanent magnet synchronous motor) drives. A comparison study between conventional general purpose speed controller in modern industry fields such as PI, IP and 2-degree of freedom controller presented also. The proposed ZPE speed controller is found suitable for vector controlled PMSM drives in giving the high level of performance while maintaining the excellent response at the time of speed command changing. In MATLAB-based comparative simulation and experiment results with commercial drive system, the proposed method shows a superior control performance compared with the conventional speed controller widely-used.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.17-18
• /
• 2012

Generally, speed control system is used to control the elevator door. The whole speed profile must be installed in the speed controller of the door control system. However, it is not easy to modify the speed profile when door opening size and time are changed. In this paper, the making speed profile is discussed by the door opening size and time. The position control algorithms of PMSM for elevator door system are compared with general speed control, position control method with speed controller, and position control with speed command feedforward compensation by simulation using MATLAB/SIMULINK.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.837-841
• /
• 2004

In order to improve the speed of railway, several parameters and/or technical issues, which are affecting speed improvement negatively, need to be considered in addition to the enhancement of physical performance of the railway system such as maximum speed, speed at curve, and speed at turnout track. The parameters under complicated situation of railway system are from the areas of rolling stocks, track, power system, signalling, etc. In general, two different aspects of technical issues can be evaluated; Technical issues in the hardware aspect and technical issues in the software aspect. The hardware parameters include running performance, braking performance, and power performance, while the software factors are rules, regulations, and riding quality. In this investigation, a comparison study between hardware and software aspects in technical issues was conducted to provide technical information on the amendment of railway speed-up regulations.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.595-601
• /
• 2004

The pantograph for Korean High Speed Train was developed and had been evaluating by through 'G7-R&D project' for home grown high speed train technology. In this paper, from the point of view in mechanical aspect, comparison study on the current collection characteristics between the KHST pantograph and contact wire in catenary system on the High-Speed Line and Ho-Nam/Kyoung-Bu conventional lines is conducted. A measuring system for the performance and mechanical characteristics of the KHST pantograph is used for this study, which was developed and installed on the Proto-type Korean High Speed Train, and physical characteristics were measured while the KHST runs on the High-Speed Line and conventional lines. Through this study, remarkable variations of characteristics which can affect to a current collection quality of high-speed train are found and analyzed from measured mean contact forces in both tracks.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.40-45
• /
• 2003

Korea selected to introduce high-speed railway system from advanced countries in order to accumulate railway technologies and develop exiting domestic logistics system. After many twists and turns, we adopted to introduce France's high-speed railway called 'TGV'. Despite many difficulties along with trials and errors, it is expected that Korean high-speed railway will be brilliantly launched in April 2004, although it has been commissioned for multi-discipline tests. It is forecast that the opening of high-speed railway will bring us the epoch-making development of logistics system. However, what if there are really some problems in the operation of high-speed railway? We cannot consider and highlight only the positive aspects of our own high-speed railway. In terms of many challenging aspects we would face in the future, there would be some matters we must consider and point out in this opportunity. In this regard, the direction for developing high-speed railway stations requires the harmony between profitability and public benefits, which must involve compatibility with other traffice systems and practical policies to secure competitive edges.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.505-508
• /
• 1999

Conventional adaptive speed estimators cannot avoid the influence of the non-linear inductance variation under the saturation conditions. Without speed sensors, it is difficult to identify the inductance variation using a reactive power mode because the model contains a term of the rotor speed. In this paper, we propose a novel speed estimator having hybrid architecture in order to estimate both the rotor speed and the inductance variation simultaneously when the motor flux is saturated. Proposed estimator consists of the error between the flux obtained from the stator voltage equation and the flux estimated from the rotor flux observer. Introducing a new correction term into the estimator increases the estimation ability of the conventional speed estimator even though the motor flux is saturated. The convergence of the speed estimation error is examined by simulation Furthermore, the experimental results show the validity of the proposed method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1320-1325
• /
• 2006

When the train running on the high-speed track, there is a speed band which track distortion is unusually increased according to the condition of track and roadbed. This speed is called critical velocity and physical parameter values are increased greatly. These phenomenon happened as high-speed train were developed, studied regularly through TGV 100 running test in France. As research result until now, the main reason is soft roadbed's bearing capacity. Wave propagation and track support capacity is varied by the ground characteristics. This paper achieved theoretical examination about resonance band(speed and frequency) that occurred in roadbed on the base rock in point of geotechnical engineering. The examination of resonance divides with ground response analysis, critical band analysis by the shear wave velocity of roadbed and train critical speed through the ground stratum.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.10
• /
• pp.690-696
• /
• 2004

This paper is proposed a hybrid intelligent controller based on the vector controlled surface permanent magnet synchronous motor(SPMSM) drive system. The hybrid combination of neural network and fuzzy control will produce a powerful representation flexibility and numerical processing capability. Also, this paper is proposed speed control of SPMSM using neural network-fuzzy(NNF) control and speed estimation using artificial neural network(ANN) Controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The error between the desired state variable and the actual one is back-propagated to adjust the rotor speed, so that the actual state variable will coincide with the desired one. The back propagation mechanism is easy to derive and the estimated speed tracks precisely the actual motor speed. This paper is proposed the theoretical analysis as well as the simulation results to verify the effectiveness of the new method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.452-458
• /
• 1998

The objective of this study is to obtain the unstable characteristics of the high-speed two-dimensional jet impinging normally onto a flat plate. The study is based on the feedback model and the experiment of the frequency characteristics of the impinging tones. Using the experimental data for the tonal frequencies of the impinging tones the convection speed of the unstable jet is obtained along with all the other features. Three kinds of unstable modes are clarified: asymmetric $A_{1}$ and $A_{2}$ and symmetric S. The condition for the excitation of each mode is found in terms of Strouhal number and Reynolds number. The convection speed is estimated and discussed in comparison with existing theoretical models. It is found that the convection speed increases with frequency when the mode is asymmetric, but decreases when it is symmetric. In addition, the characteristics of the high-speed impinging jet are compared with the low-speed impinging jet.