• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_1
• /
• pp.907-915
• /
• 2020

Specification selection, Layout, specifications and combinations of Power Drives, and Ship motions were studied for FGPP(Floating Gas-fired Power Plants), which are still needed in areas such as the Caribbean, Latin America, and Southeast Asia where electricity is not sufficiently supplied. From this study, the optimal equipment layout in ships was derived. In addition, the difference between engine and turbine was verified through LCOE(Levelized Cost of Energy) comparison according to the type and combination of Power Drives. Analysis of Hs(Significant Height of wave) and Tp(spectrum Peak Period of wave) for places where this FGPP will be tested or applied enables design according to wave characteristics in Brazil and Indonesia. Normalized Sloshing Pressures of FGPP and LNG Carrier are verified using a sloshing analysis program, which is CFD(Computational Fluid Dynamics) software developed by ABS(American Bureau of Shipping). Power Transmission System is studied with Double bus with one Circuit Breaker Topology. A nd the CFD analysis allowed us to calculate linear roll damping coefficients for more accurate full load conditions and ballast conditions. Through RAO(Response Amplitude Operator) analysis, we secured data that could minimize the movement of ships according to the direction of waves and ship placement by identifying the characteristics of large movements in the beam sea conditions. The FGPP has been granted an AIP(Approval in Principle) from a classification society, the ABS.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.7
• /
• pp.949-954
• /
• 2022

The lipolytic yeast Candida aaseri SH14 contains three Acyl-CoA oxidases (ACOXs) which are encoded by the CaAOX2, CaAOX4, and CaAOX5 genes and catalyze the first reaction in the β-oxidation of fatty acids. Here, the respective functions of the three CaAOX isozymes were studied by growth analysis of mutant strains constructed by a combination of three CaAOX mutations in minimal medium containing fatty acid as the sole carbon source. Substrate specificity of the CaAOX isozymes was analyzed using recombinant C. aaseri SH14 strains overexpressing the respective genes. CaAOX2 isozyme showed substrate specificity toward short- and medium-chain fatty acids (C6-C12), while CaAOX5 isozyme preferred long-chain fatty acid longer than C12. CaAOX4 isozyme revealed a preference for a broad substrate spectrum from C6-C16. Although the substrate specificity of CaAOX2 and CaAOX5 covers medium- and long-chain fatty acids, these two isozymes were insufficient for complete β-oxidation of long-chain fatty acids, and therefore CaAOX4 was indispensable.

• Coupled systems mechanics
• /
• v.12 no.4
• /
• pp.315-335
• /
• 2023

The building sector has seen a huge increase in the use of lightweight concrete recently, which might result in saving in both cost and time. As a result, the study has been done on various types of concrete, including lightweight (LC), heavyweight (HC), and ordinary concrete (OC), to understand how they react to earthquake loads. The comparisons between their responses have also been taken into account in order to acquire the optimal reaction for various materials in building work. The findings demonstrate that LWC building models are more earthquake-resistant than the other varieties due to the reduction in building weight which can be a curial factor in the resistance of earthquake forces. Another crucial factor that was taken into study is the combination of various types of concrete [HC, LC, and OC] in the structural components. On the other hand, the bending moments and shear forces of LC had reduced to 17% and 19%, respectively, when compared to OC. Otherwise, the bending moment and shear force demand responses in the HC model reach their maximum values by more than 34% compared to the reference model OC. In addition, the results show that the LCC-OCR (light concrete column and ordinary concrete roof) and OCC-LCR (ordinary concrete for the column and light concrete for the roof) models' responses have fewer values than the other types.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4743-4750
• /
• 2022

Heat pipe cooled nuclear reactor has been a very attractive technical solution to provide the power for deep space applications. In this paper, a 200 kWe space nuclear reactor power design has been proposed based on the combination of an integrated UN ceramic fuel, a heat pipe cooling system and the Stirling power generators. Neutronics and thermal analysis have been performed on the space nuclear reactor. It was found that the entire reactor core has at least 3.9 $ subcritical even under the worst-case submersion accident superimposed a single safety drum failure, and results from fuel temperature coefficient, neutron spectrum and power distribution analysis also showed that this reactor design satisfies the neutronics requirements. Thermal analysis showed that the power in the core can be successfully removed both in normal operation or under one or more heat pipes failure scenarios.

• Earthquakes and Structures
• /
• v.23 no.4
• /
• pp.385-401
• /
• 2022

Uncertainty quantification is the most important challenge in seismic fragility assessment of structures. The precision increment of the quantification method leads to reliable results but at the same time increases the computational costs and the latter will be so undesirable in cases such as reliability-based design optimization which includes numerous probabilistic seismic analyses. Accordingly, the authors' effort has been put on the development and validation of an approach that has reduced computational cost in seismic fragility assessment. In this regard, it is necessary to apply the appropriate methods for consideration of two categories of uncertainties consisting of uncertainties related to the ground motions and structural characteristics, separately. Also, cable-stayed bridges have been specifically selected because as a result of their complexity and the according time-consuming seismic analyses, reducing the computations corresponding to their fragility analyses is worthy of studying. To achieve this, the fragility assessment of three case studies is performed based on existing and proposed approaches, and a comparative study on the efficiency in the estimation of seismic responses. For this purpose, statistical validation is conducted on the seismic demand and fragility resulting from the mentioned approaches, and through a comprehensive interpretation, sufficient arguments for the acceptable errors of the proposed approach are presented. Finally, this study concludes that the combination of the Capacity Spectrum Method (CSM) and Uniform Design Sampling (UDS) in advanced proposed forms can provide adequate accuracy in seismic fragility estimation at a significantly reduced computational cost.

• Current Optics and Photonics
• /
• v.8 no.1
• /
• pp.65-71
• /
• 2024

We present a Yb-doped narrow-linewidth polarization-maintaining all-fiber amplifier that achieves a high mode-instability (MI) threshold, high output power, and 9.7-GHz spectral linewidth. Six wavelength-multiplexed laser diodes are used to pump this amplifier. First, we construct a high-power fiber amplifier based on a master oscillator-power amplifier configuration for experiments. Subsequently, we examine the MI threshold by individually pumping the amplifier with wavelengths of 976, 974, 981, 974, and 981 nm respectively. The experimental results demonstrate that the amplifier exhibits a high MI threshold (>3.5 kW) when pumped with a combination of wavelengths at 974 and 981 nm. Afterward, we inject an optimized phase-modulated seed with a nearly flat-top spectrum into this amplifier. Ultimately, laser output of 3.2 kW and 9.7 GHz are obtained.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.5
• /
• pp.239-243
• /
• 2008

This paper proposes a new audio identification method based on a combination of the instantaneous and dynamic spectral features of the audio spectrum. Especially we propose the spectro-temporal subband centroids that are easy to compute and effective to summarize the instantaneous and dynamic spectral variations. Experimental results demonstrate that the identification performance can be greatly improved by combining both the spectral and the temporal subband centroids.

• Structural Engineering and Mechanics
• /
• v.72 no.1
• /
• pp.99-111
• /
• 2019

To investigate the seismic performance of long-span partially earth-anchored cable-stayed bridge, a super long-span partially earth-anchored cable-stayed bridge scheme with main span of 1400m is taken as example, structural response of the bridge under E1 seismic action is investigated numerically by the multimode seismic response spectrum and time-history analysis, seismic behavior and also the effect of structural geometric nonlinearity on the seismic responses of super long-span partially earth-anchored cable-stayed bridges are revealed. The seismic responses are also compared to those of a fully self-anchored cable-stayed bridge with the same main span. The effects of structural parameters including the earth-anchored girder length, the girder width, the girder depth, the tower height to span ratio, the inclination of earth-anchored cables, the installation of auxiliary piers in the side spans and the connection between tower and girder on the seismic responses of partially ground-anchored cable-stayed bridges are investigated, and their reasonable values are also discussed in combination with static performance and structural stability. The results show that the horizontal seismic excitation produces significant seismic responses of the girder and tower, the seismic responses of the towers are greater than those of the girder, and thus the tower becomes the key structural member of seismic design, and more attentions should be paid to seismic design of these sections including the tower bottom, the tower and girder at the junction of tower and girder, the girder at the auxiliary piers in side spans; structural geometric nonlinearity has significant influence on the seismic responses of the bridge, and thus the nonlinear time history analysis is proposed to predict the seismic responses of super long-span partially earth-anchored cable-stayed bridges; as compared to the fully self-anchored cable-stayed bridge with the same main span, several stay cables in the side spans are changed to be earth-anchored, structural stiffness and natural frequency are both increased, the seismic responses of the towers and the longitudinal displacement of the girder are significantly reduced, structural seismic performance is improved, and therefore the partially earth-anchored cable-stayed bridge provides an ideal structural solution for super long-span cable-stayed bridges with kilometer-scale main span; under the case that the ratio of earth-anchored girder length to span is about 0.3, the wider and higher girder is employed, the tower height-to-span ratio is about 0.2, the larger inclination is set for the earth-anchored cables, 1 to 2 auxiliary piers are installed in each of the side spans and the fully floating system is employed, better overall structural performance is achieved for long-span partially earth-anchored cable-stayed bridges.

• Korean Journal of Biological Psychiatry
• /
• v.28 no.2
• /
• pp.50-57
• /
• 2021

Objectives Clozapine is the most effective atypical antipsychotic agent for the treatment-resistant schizophrenia (TRS), however, only 40%-70% of TRS patients respond to clozapine. Moreover, TRS encompasses various symptom dimensions. Therefore, augmentation with other medications for clozapine is frequently applied. However, the prescription pattern of clozapine and combined medications in Korea is yet to be examined. This study aims to investigate the maintenance treatment pattern of clozapine and augmentation agents in one Korean tertiary hospital. Methods The patients with schizophrenia spectrum disorders under clozapine maintenance, defined as one-year clozapine continuation, were subjected for analysis. Medication data at one-year time-point after clozapine initiation was extracted and analyzed. Results Among total 2897 patients having clozapine prescription experience from January 2000 to December 2018, 1011 patients were on clozapine maintenance. The mean age of clozapine initiation was 30.2 ± 11.3 years, and the maintenance dose of clozapine was 217.8 ± 124.3 mg/day. Combination rate of antipsychotics, mood stabilizers, and antidepressants were 43.5%, 25.3%, 38.6%, respectively. Most frequently prescribed drugs in each category were aripiprazole, valproate, and sertraline. Olanzapine equivalent dose of combined antipsychotics was 10.4 ± 7.7 mg/day. Male patients were prescribed higher dose of combined antipsychotics and higher rate of antidepressants. Female patients had later onset of clozapine prescription. Patients with two or more combined antipsychotics were prescribed higher dose of clozapine and higher rate of antidepressants compared to patients with one combined antipsychotic. Conclusions Taken together, among the patients taking clozapine, a substantial rate of patients were under polypharmacy. The present findings based on the real-world prescription pattern could provide the valuable clinical information on the treatment of TRS-related conditions.

• Journal of Plant Biotechnology
• /
• v.43 no.2
• /
• pp.157-163
• /
• 2016

This study was conducted to investigate the potential use of New Zealand spinach (Tetragonia tetragonioides) as a new vegetable crop which will be cultivated in salt-affected soils such as reclaimed areas. New Zealand spinach ecotypes native to Korea were collected across the Southern, Western and Eastern seashore regions of the Korean peninsula, among which fifty-five accessions were later further propagated and evaluated genetically by using an AFLP (amplified fragment length polymorphism) marker. Based on the AFLP analysis performed to uncover the genetic diversity of the collected ecotypes, enzymatic cleavage of the extracted DNA was implemented based on 12 EcoRI and MseI combinations. A total of 1,279 alleles (107 alleles per EcoRI and MseI enzyme combination) were successfully amplified, among which 62 alleles per enzyme combination were polymorphic (58%). The AFLP analysis indicated that the rate of genetic dissimilarity was 29% among the New Zealand spinach collections, which were clustered into the 7 genetic diversity group. This is the first report on the genetic variation in the genus Tetragonia, and the basic information can be applied to select parental lines for enhancing the segregation spectrum of the new halophytic vegetable plant grown in salt-affected areas.