• 제목/요약/키워드: Spectrum Monitoring

검색결과 357건 처리시간 0.031초

지역사회 거주 조현병 범주 장애 환자의 신체건강관리 관련 요인 (Factors Related to Physical Health Monitoring in Community-Dwelling Patients with Schizophrenia Spectrum Disorder)

  • 김미나;전민;이주연;김선영;김재민;윤진상;김수진;김성완
    • 대한조현병학회지
    • /
    • 제22권1호
    • /
    • pp.14-20
    • /
    • 2019
  • Objectives: To identify factors related to physical health monitoring of patients with schizophrenia spectrum disorder. Methods: A total of 172 patients with schizophrenia spectrum disorder registered in mental health welfare centers and rehabilitation facilities in Gwangju were recruited. Physical health monitoring was defined by two health behaviors; fasting blood tests within recent 2 years in all participants and routine medical check-ups covered by national insurance within recent 5 years in participants aged 40 years or older. Demographic and clinical characteristics including overweight, metabolic syndrome and knowledge about physical illness were compared according to physical health monitoring. Results: Prevalence of overweight and metabolic syndrome were 62.8% and 40.1%, respectively. The rates of fasting blood tests and routine medical check-ups were 34.9% and 67.9%, respectively. The rates of fasting blood tests were significantly higher in general hospital and university hospital compared to mental hospital or private clinic. Rates of routine medical check-ups were significantly lower in individuals using daily rehabilitation service and smokers. Knowledge about cancer and chronic illness were significantly better in individuals receiving routine medical check-ups compared with those not receiving it. Conclusion: Education about physical health should be integrated to mental health service in community mental health center.

FREQUENCY SPECTRUM ANALYSIS OF ACOUSTIC EMISSION OF HARD DISK DRIVE HEAD/DISK INTERACTION

  • Chung, K.H.;Oh, J.K.;Moon, J.T.;Kim, D.E.
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
    • /
    • pp.273-274
    • /
    • 2002
  • In order to evaluate the flying characteristics of slider, the acoustic emission (AE) as well as friction signals are typically utilized. In this work the frequency spectrum analysis is performed using the AE signal obtained during the head/disk interaction such as load/unload mechanism using ramp, impact situation in the presence of a bump on disk surface and other contact phenomena including particle interaction. It was shown that the influence of impact can be characterized effectively in the AE frequency spectrum. As a result of this work, frequency spectrum analysis will be utilized with better understanding for studying the head/disk interface (HDI) characteristics and monitoring the particle interaction in HDI effectively.

  • PDF

신경망 모델을 이용한 밀링공구의 이상진단에관한 연구

  • 이상석;김희술
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 춘계학술대회 논문집
    • /
    • pp.71-75
    • /
    • 1993
  • The application of artificial neural network forcondition monitoring and diagnosis of milling tools was introduced. To detect the conditions of milling tools, the monitoring wywtem consists of three phases: "preparation phase", "learning phase", "production phase". The conditions of milling tools were categorized into the three states. "normal", "warning", "abnormal". The dectection of tool condition, in this paper, could be successfully performed by monitoring the variation of power spectrum on Y dirctional cutting force.

회전체 고장진단을 위한 진동 신호의 분석 (Analysis of Vibration Signal for Failure Diagnosis of Rotating Devices)

  • 임환조;김성동;정선환;홍성욱;오길호;박종희
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1995년도 춘계학술대회 논문집
    • /
    • pp.301-307
    • /
    • 1995
  • A monitoring technique of spindle fairure should be investirated prior to researcs of fairure diagnosis. This work is about monitoring of unbalanced shaft and defected bearings. The major work is done via experiments and the vibration signal is analysed means of power spectrum technique, and root mean squqre, peak-to-peak. Relationship is quantitatively investigated between defects and these monitoring paramenters.

  • PDF

레이저 유도 플라즈마 분광 기법을 이용한 용접 연강에서의 비접촉 강도 측정과 해석 (Non-contact Measurement and Analysis of Surface Hardness on Welding Steel using Laser-induced Breakdown Spectroscopy)

  • 김주한;고찬솔
    • 한국정밀공학회지
    • /
    • 제31권2호
    • /
    • pp.141-148
    • /
    • 2014
  • In this work, effects of plasma on different hardness of welding steel using laser-induced breakdown spectroscopy were investigated. The ratios of ionic to atomic spectrum peaks were related to its material hardness. The major spectrum peak (Fe) and minor spectrum peak (Mn) were considered as monitoring elements. The stronger repulse plasma was generated, the harder material it was. The ratios of ionic to atomic spectrum peaks increased with respect to the material hardness as well. The correlation of minor spectrum peaks was stronger than that of major spectrum peaks. However, the major spectrum peaks indicated a similar trend, which could be used to estimate the hardness, too. Based on this result, the method could be used as a non-contact remote measurement of material properties.

Statistical characteristics of sustained wind environment for a long-span bridge based on long-term field measurement data

  • Ding, Youliang;Zhou, Guangdong;Li, Aiqun;Deng, Yang
    • Wind and Structures
    • /
    • 제17권1호
    • /
    • pp.43-68
    • /
    • 2013
  • The fluctuating wind induced vibration is one of the most important factors which has been taken into account in the design of long-span bridge due to the low stiffness and low natural frequency. Field measurement characteristics of sustained wind on structure site can provide accurate wind load parameters for wind field simulation and structural wind resistance design. As a suspension bridge with 1490 m main span, the Runyang Suspension Bridge (RSB) has high sensitivity to fluctuating wind. The simultaneous and continuously wind environment field measurement both in mid-span and on tower top is executed from 2005 up to now by the structural health monitoring system installed on this bridge. Based on the recorded data, the wind characteristic parameters, including mean wind speed, wind direction, the turbulence intensity, the gust factors, the turbulence integral length, power spectrum and spatial correlation, are analyzed in detail and the coherence functions of those parameters are evaluated using statistical method in this paper. The results indicate that, the turbulence component of sustain wind is larger than extremely strong winds although its mean wind speed is smaller; the correlation between turbulence parameters is obvious; the power spectrum is special and not accord with the Simiu spectrum and von Karman spectrum. Results obtained in this study can be used to evaluate the long term reliability of the Runyang Suspension Bridge and provide reference values for wind resistant design of other structures in this region.

Full spectrum estimation of helicopter background and cosmic gamma-ray contribution for airborne measurements

  • Lukas Kotik;Marcel Ohera
    • Nuclear Engineering and Technology
    • /
    • 제55권3호
    • /
    • pp.1052-1060
    • /
    • 2023
  • The airborne radiation monitoring has been used in geophysics for more than forty years and now it also has its important role in emergency monitoring. The aircraft background and the cosmic gamma-rays contribute to the measured gamma spectrum on the aircraft board. This adverse effect should be eliminated before the data processing. The paper describes two semiparametric methods to estimate the full spectrum aircraft background and cosmic gamma-ray contribution from spectra measured at altitudes where terrestrial contribution is negligible. The methods only assume to know possible peak positions in spectra and their full width at half maximum, that can be easily obtained e.g. from terrestrial measurement. The methods were applied to real experimental data acquired on Mi-17 and Bell 412 helicopter boards. The IRIS airborne gamma-ray spectrometer, with 4×4 L NaI(Tl) crystals, produced by Pico Envirotec Inc., Canada, was used on helicopters' boards. To obtain valid estimate of the aircraft background and the cosmic contribution, the measurements over sea and large water areas were carried out. However, the satisfactory results over inland were also achieved comparing with those acquired over large water areas.

Understanding the Pathophysiology and Magnetic Resonance Imaging of Multiple Sclerosis and Neuromyelitis Optica Spectrum Disorders

  • Laura Cacciaguerra;Maria A. Rocca;Massimo Filippi
    • Korean Journal of Radiology
    • /
    • 제24권12호
    • /
    • pp.1260-1283
    • /
    • 2023
  • Magnetic resonance imaging (MRI) has been extensively applied in the study of multiple sclerosis (MS), substantially contributing to diagnosis, differential diagnosis, and disease monitoring. MRI studies have significantly contributed to the understanding of MS through the characterization of typical radiological features and their clinical or prognostic implications using conventional MRI pulse sequences and further with the application of advanced imaging techniques sensitive to microstructural damage. Interpretation of results has often been validated by MRI-pathology studies. However, the application of MRI techniques in the study of neuromyelitis optica spectrum disorders (NMOSD) remains an emerging field, and MRI studies have focused on radiological correlates of NMOSD and its pathophysiology to aid in diagnosis, improve monitoring, and identify relevant prognostic factors. In this review, we discuss the main contributions of MRI to the understanding of MS and NMOSD, focusing on the most novel discoveries to clarify differences in the pathophysiology of focal inflammation initiation and perpetuation, involvement of normal-appearing tissue, potential entry routes of pathogenic elements into the CNS, and existence of primary or secondary mechanisms of neurodegeneration.

풍력발전기의 성능 모니터링 및 하중분석 (Performance Monitoring and Load Analysis of Wind Turbine)

  • 배재성;김성완;윤정은;경남호
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.385-389
    • /
    • 2004
  • Test facilities for the wind turbine performance monitoring and mechanical load measurements are installed in Vestas 100 kW wind turbine in Wollyong test site, Jeju island. The monitoring system consists of Garrad-Hassan T-MON system, telemetry system for blade load measurement, various sensors such as anemometer, wind vane, strain gauge, power meter, and etc. The experimental procedure for the measurement of wind turbine loads, such as edgewise(lead-lag) bending moment, flapwise bending moment, and tower base bending moment, has been established. Strain gauges are on-site calibrated against load cell prior to monitoring the wind turbine loads. Using the established monitoring system, the wind turbine is remotely monitored. From the measured load data, the load analysis has been performed to obtain the load power spectral density and the fatigue load spectra of the wind turbine.

  • PDF

스펙트럼 감시를 위한 고속 탐색 디지털-IF FFT 수신기 설계 및 분석 (A Design and Performance Analysis of the Fast Scan Digital-IF FFT Receiver for Spectrum Monitoring)

  • 최준호;나선필;박철순;양종원;박영미
    • 한국군사과학기술학회지
    • /
    • 제9권3호
    • /
    • pp.116-122
    • /
    • 2006
  • A fast scan digital-IF FFT receiver at the radio communication band is presented for spectrum monitoring applications. It is composed of three parts: RF front-end, fast LO board, and signal processing board. It has about 19GHz/s scan rate, multi frequency resolution from 10kHz to 2.5kHz, and high sensitivity of below -99dBm. The design and performance analysis of the digital-IF FFT receiver are presented.