• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.330-330
• /
• 2009

For the high-performance Quantum dots-Light Emitting Diodes in the near-infrared and visible spectrum, adequate electro- and hole-transporting layers are required. The operation lifetimes of typical materials used in OLEDs are very limited and degraded especially by the oxygen and humid atmosphere. In this work, NiO was selected as a possible hole-transporting layer replacing the TPD film used in QD-LEDs. About 40-nm-thick NiO films have been deposited by the rf-sputtering method on various technical substrates such as FTO/glass, ITO/glass, and ITO/PEN. For the balance of charge carriers and quenching consideration, the resistivity of the deposited NiO films was investigated controlling the oxygen in the sputtering gas. NiO films were fabricated at room temperature and about 6mTorr using pure Ar, 2.5%-, 5%-, and 10%-mixed $O_2$ in Ar respectively. We also investigated the rf-power dependence on NiO films in the range of 80 ~ 200 Watts. The resistivity of the samples was varied from highly conductive to resistive state. Also discussed are the surface roughness of NiO films to provide the smooth surface for the deposition of QDs.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.575-581
• /
• 2012

The electrochemical oxygen demand (ECOD) is an additional sum parameter, which has not yet found the attention it deserves. It is defined as the oxygen equivalent of the charge consumed during an electrochemical oxidation of the solution. Only one company has yet developed an instrument to determine the ECOD. This instrument uses $PbO_2$-electrodes for the oxidation and has been successfully implemented in an automatic on-line monitor. A general problem of the ECOD determination is the high overpotential of electrochemical oxidations of most organic compounds at conventional electrodes. Here we present a new approach for the ECOD determination, which is based on the use of a solid composite electrodes with highly efficient electro-catalysts for the oxidation of a broad spectrum of different organic compounds. Lead dioxide as an anode material has found commercial application in processes such as the manufacture of sodium per chlorate and chromium regeneration where adsorbed hydroxyl radicals from the electro-oxidation of water are believed to serve as the oxidizing agent. The ECOD sensors based on the Au/$PbO_2$ electrode were operated at an optimized applied potential, +1.6 V vs. Ag/AgCl/sat. KCl, in 0.01 M $Na_2SO_4$ solution, and reduced the effect of interference ($Cl^-$ and $Fe^{2-}$) and an expended lifetime (more than 6 months). The ECOD sensors were installed in on-line auto-analyzers, and used to analyze real samples.

• 한국위성정보통신학회논문지
• /
• 제10권2호
• /
• pp.1-9
• /
• 2015

최근 제한된 주파수 자원의 효율적인 사용을 위한 인지 무선 기술(CR)이 많은 관심을 받고 있다. CR 기술에서 가장 중요한 부분은 인가 사용자의 통신을 보호 하는 것이다. 따라서 비인가 사용자는 자신이 현재 사용 중인 주파수 대역은 물론 인가 사용자가 나타났을 시에 스위칭 해야 할 후보 채널의 주기적인 센싱도 필요하다. 본 논문에서는 CR 환경에서 인가 사용자를 보호하기 위한 방법으로 비인가 사용자로 하여금 각 노드의 남은 에너지와 센싱 존 이웃이라는 개념을 이용하여 협력적인 채널 센싱을 하도록 제안한다. 채널 센싱은 현재 사용하고 있는 채널을 센싱하는 인밴드센싱과 인가 사용자가 나타났을 경우 스위칭 해야할 후보 채널을 센싱하는 아웃밴드 센싱으로 수행된다. 모의 실험을 통해 제안된 방법이 센싱을 수행하는 노드의 수를 줄임으로 인해 센싱에 필요한 많은 에너지가 절약되고, 남은 노드들의 에너지가 균일해 짐으로써 네트워크의 수명이 길어지는 것을 확인할 수 있다.

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.29-34
• /
• 2005

Tungsten oxide($WO_{3}$) is suitable to materials for photochromic window in the visible region. The resistivities of CdS, $WO_{3}$, and $WO_{3}$/CdS films prepared by thermal evaporation method were $4.61\times 10\^{3}$, $7.59\times10^{3}$, and $6.29\times10^{3}$ $\omega$ cm. And x-ray diffraction patterns of CdS, $WO_{3}$/CdS films showed a preferred orientation of hexagonal(002), and the monoclinic(020) structure, respectively. The optical transmission were measured that the cut-on wavelength were 510nm, 380nm for CdS and $WO_{3}$ films respectively, and the transmission spectrum of $WO_{3}$/CdS was shifted into the visible region. Photoluminescence(PL) spectra showed the two peaks at 2.8 eV and 3.2 eV for the as-grown sample($WO_{3}$/CdS ($500{\AA}$), but the other sample($WO_{3}$/CdS ($1000{\AA}$)) had a peak energy value of 2.8 eV. The photochromism of $WO_{3}$/CdS films showed that the excitation of electron-hole pairs and subsequent coloration is shifted into visible-light range. And the spectral behavior of coloration turned out to be proportional to the excited electron-hole pairs creation rate of CdS film. This result is interpreted in terms of charge carrier injection from the CdS-layer into the $WO_{3}$ films. We found a value of about 2.8 eV of $WO_{3}$/CdS film which is somewhat higher than peak energy of 2.54 eV using CBD prepared by Bechinger et. al.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.11.2-11.2
• /
• 2011

Polymer based organic photovoltaics have attracted a great deal of attention due to the potential cost-effectiveness of light-weight and flexible solar cells. However, most BHJ polymer solar cells are not thermally stable as subsequent exposure to heat drives further development of the morphology towards a state of macrophase separation in the micrometer scale. Here we would like to show three different approaches for developing new electroactive polymers to improve the thermal stability of the BHJ solar cells, which is a critical problem for the commercialization of these solar cells. For one of the examples, we report a new series of functionalized polythiophene (PT-x) copolymers for use in solution processed organic photovoltaics (OPVs). PT-x copolymers were synthesized from two different monomers, where the ratio of the monomers was carefully controlled to achieve a UV photo-crosslinkable layer while leaving the ${\pi}-{\pi}$ stacking feature of conjugated polymers unchanged. The crosslinking stabilizes PT-x/PCBM blend morphology preventing the macro phase separation between two components, which lead to OPVs with remarkably enhanced thermal stability. The drastic improvement in thermal stabilities is further characterized by microscopy as well as grazing incidence X-ray scattering (GIXS). In the second part of talk, we will discuss the use of block copolymers as active materials for WOLEDs in which phosphorescent emitter isolation can be achieved. We have exploited the use of triarylamine (TPA) oxadiazole (OXA) diblock copolymers (TPA-b-OXA), which have been used as host materials due to their high triplet energy and charge-transport properties enabling a balance of holes and electrons. Organization of phosphorescent domains in TPA-b-OXA block copolymers is demonstrated to yield dual emission for white electroluminescence. Our approach minimizes energy transfer between two colored species by site isolation through morphology control, allowing higher loading concentration of red emitters with improved device performance. Furthermore, by varying the molecular weight of TPA-b-OXA and the ratio of blue to red emitters, we have investigated the effect of domain spacing on the electroluminescence spectrum and device performance.

• 대한화학회지
• /
• 제26권5호
• /
• pp.326-332
• /
• 1982

플루오르화수소산 존재하에서 methylene blue의 양이온과 $BF_4^-$, 음이온이 이루는 착물을 1,2-dichloroethane과 nitrobenzene으로 용매추출하여 분광광도법으로 분석하였다. 적외선과 가시선 스펙트럼을 조사하여 이 착물은 1:1 조성비를 가지는 ion-pair로 존재하는 것으로 보이며 1,2-dichlorethane 중에서는 해리하지 않는 것을 알아냈다. 1,2-Dichlorethane에 대해서는 HF의 농도가 1.43${\times}10^{-2}$~ 2.86${\times}10^{-1}$M 범위에서 추출상수가 25$^{\circ}$C에서 1.1${\times}10^4M{-1}$로 일정한 값을 나타내었으며 nitrobenzene에 대하여는 대체로 10배 가량 큰 값을 가지지만 HF농도가 증가함에 약간씩 증가하였다.

• 한국인터넷방송통신학회논문지
• /
• 제18권1호
• /
• pp.217-222
• /
• 2018

배터리의 열화는 SoC 및 SoH의 변화에 따라 결정된다. 배터리의 열화를 판정하기 위해 전달 함수에 의한 배터리 SoC를 측정 하는 방법을 연구 하였다. 배터리의 SoC는 DC 저항이 검출되는 1Hz 대역에서 가장 크게 변화 한다. 하지만 관측하기 협소한 대역이기 때문에 톤버스트 신호를 입력신호로 사용하여 배터리의 주파수 응답대역을 대역을 1kHz로 이동 시켰다. 신호의 주파수 영역 특성을 관측을 위해 Welch스펙트럼 추정 방법을 사용하였다. 스펙트럼 추정 결과 배터리의 응답 신호는 SoC가 40%, 60%, 80% 일 때 각각 1dB의 차이를 갖는 것을 확인 하였으며, 이를 통해 새로운 배터리 SoC의 측정 방식을 제안 하였다.

• 한국재료학회지
• /
• 제28권1호
• /
• pp.68-74
• /
• 2018

Cobalt-incorporated zeolitic imidazolate framework ZIF-8 was synthesized by a simple one-pot synthesis method at room temperature. Powder X-ray diffraction patterns and energy dispersive X-ray spectrum confirmed the formation of the bimetallic Co/Zn-ZIF structure. UV-Vis diffuse reflectance spectra revealed that the bimetallic ZIF had a lower HOMO-LUMO gap compared with ZIF-8 due to the charge transfer process from organic ligands to cobalt centers. A hydrolytic stability test showed that Co/Zn-ZIF is very robust in aqueous solution - the most important criterion for any material to be applied in photodegradation. The photocatalytic efficiency of the synthesized samples was investigated over the Indigo Carmine (IC) dye degradation under solar simulated irradiation. Cobalt incorporated ZIF-8 exhibited high efficiency over a wide range of pH and initial concentration. The degradation followed through three distinct stages: a slow initial stage, followed by an accelerated stage and completed with a decelerated stage. Moreover, the photocatalytic performance of the synthesized samples was highly improved in alkaline environment rather than in acidic or neutral environments, which may have been because in high pH medium, the increased concentration of hydroxyl ion facilitated the formation of hydroxyl radicals, a reactive species responsible for the breaking of the Indigo Carmine structure. Thus, Co/Zn-ZIF is a promising and green material for solving the environmental pollution caused by textile industries.

• 분석과학
• /
• 제8권3호
• /
• pp.249-258
• /
• 1995

Polyazine, polyazomethine ( I ) 및 ( II )는 각각 p-benzoquinone과 hydrazine hydrate, p-phenylenediamine, 그리고 diaminomaleonitrile을 dimethylsulfoxide(DMSO)하에서 중합하여 얻었다. Polyazine, polyazomethine ( I ) 및 ( II )의 IR spectra 분석결과 $1600cm^{-1}$ 부근에서 Schiff base의 특성 peak인 -C=N-를 확인하였다. 또한 각 polyazine, polyazomethine ( I ) 및 ( II )를 conc. $H_2SO_4$에 용해시켜 UV/VIS spectrum 측정결과 protonate (>$C\limits^{\small\oplus}=NH-$)에 해당되는 것으로 생각되는 흡수 band가 300nm 부근에서 나타났으며 350~415nm 부근에서 전하이동전이와 같은 흡수로 생각되는 흡수 band가 나타났다. Polyazine, Polyazomethine ( I ) 및 ( II )의 자체 전기전도도는 약 $10^{-14}{\sim}10^{-11}{\Omega}^{-1}cm^{-1}$로 나타났으며 $I_2$를 도핑한 후 최고 전기전도도가 $10^{-2}{\Omega}^{-1}cm^{-1}$ 정도로 약 $10^{12}{\sim}10^9$배 향상되었다.

• 조명전기설비학회논문지
• /
• 제19권2호
• /
• pp.69-76
• /
• 2005

본 논문에서는 모의 GIS 내부에 유전체 파티클 들을 놓아둠으로서 전하의 축적과 전계의 집중이 용이하도록 하여 부분방전을 모의하였다. 이때 부분방전 발생과 진전에 따른 방사전자파를 스펙트럼 분석기와 $EMI{\cdot}EMC$ 측정용 안테나$(30\~2000(MHz))$를 사용하여 측정$\cdot$분석하였다. 모의 GIS내부에 유전체 파티클 존재에 따른 부력방전의 검출과 방진전전 과정의 판단을 위한 절연진단의 방법으로서 본 논문에서 제안한 측정 주파수의 대역의 분리와 데이터 측정과 분석법을 이용하면 부분방전의 검출과 방전과정의 판단이 가능함을 확인하였다.