• Journal of Pharmaceutical Investigation
• /
• v.15 no.3
• /
• pp.151-159
• /
• 1985

For the determination of aliphatic carbamates, the quantitative analysis of carisoprodol was investigated by gab chromatography (GC) and spectrophotometry. All the methods studied were found to be very quantitative. The minimum experimental amounts of GC method, spectrophotometric method I and II were approximately $10^{-9},\;10^{-5}$ and $10^{-8}$ mole, respectively. The obtained results showed that GC method I was much more sensitive and rapid than spectrophotometric method II.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.517-524
• /
• 2004

Two simple and sensitive spectrophotometric methods were developed for the determination of carbocisteine, penicillamine, ethionamide and thioctic acid in bulk and in their pharmaceutical preparations using alkaline potassium permanganate as an oxidizing agent. The first one involves determination of ethionamide and thioctic acid by spectrophotometric investigation of the oxidation reaction of the two drugs. The second method involves determination of carbocisteine and penicillamine by kinetic studies of the oxidation reaction of these two drugs at room temperature for a fixed time of 20 minutes. The absorbance of the colored manganate ions was measured at 610 nm in both methods. 1-10 ${\mu}$g/mL of ethionamide and thioctic acid could be etermined by the spectrophotometric method with detection limits of 0.11 and 0.089 ${\mu}$g/mL for the two drugs respectively. 2-10 ${\mu}$g/mL of carbocisteine and penicillamine could be determined by the kinetic method with detection limits of 0.14 and 0.21 ${\mu}$g/mL respectively. The two methods were successfully applied for the determination of these drugs in their dosage forms.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.727-732
• /
• 2016

A simple and rapid spectrophotometric method has been developed to enable the determination of plutonium concentration in an irradiated fuel solution in the presence of all fission products. An excess of ceric ammonium nitrate solution was employed to oxidize all the valence states of plutonium to +6 oxidation state. Interference due to the presence of fission products such as ruthenium and zirconium, and corrosion products such as iron in the envisaged concentration range, as in the irradiated fuel solution, was studied in the determination of plutonium concentration by the direct spectrophotometric method. The stability of plutonium in +6 oxidation state was monitored under experimental conditions as a function of time. Results obtained are reproducible, and this method is applicable to radioactive samples resulting before the solvent extraction process during the reprocessing of fast reactor spent fuel. An analysis of the concentration of plutonium shows a relative standard deviation of <1.2% in standard as well as in simulated conditions. This reflects the fast reactor fuel composition with respect to uranium, plutonium, fission products such as ruthenium and zirconium, and corrosion products such as iron.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.112-118
• /
• 1993

A water-soluble chromogenic reagent, N,N'-oxalylbis(2-pyridyl-3'-sulphobenzoylhydrazone) has been synthesized. Spectrophotometric and first-and second-derivative spectrophotometric methods for the determination of copper with the reagent have been developed. Determination has been performed by measuring the absorbance and the first-and second-derivative values of the copper complexes in aqueous solutions (pH 1.89) at 379, 395, 363 and 421 nm, respectively. The method allows the determination of 0.12-1.20 ${\mu}g$ /ml of copper and has been applied to the analysis of aluminium alloy samples. The best results have been obtained from the measurements of the second-derivative values at 421 nm.

• BMB Reports
• /
• v.38 no.3
• /
• pp.366-369
• /
• 2005

NADPH-cytochrome P450 reductase (CPR) transfers electrons from NADPH to cytochrome P450 and also catalyzes the one-electron reduction of many drugs and foreign compounds. Various spectrophotometric assays have been performed to examine electron-accepting properties of CPR and its ability to reduce cytochrome $b_5$, cytochrome c, and ferricyanide. In this report, reduction of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) by CPR has been assessed as a method for monitoring CPR activity. The principle advantage of this substance is that the reduction of MTT can be assayed directly in the reaction medium by a continuous spectrophotometric method. The electrons released from NADPH by CPR were transferred to MTT. MTT reduction activity was then assessed spectrophotometrically by measuring the increase of $A_{610}$. MTT reduction followed classical Michaelis-Menten kinetics ($K_m\;=\;20\;{\mu}M$, $k_{cat}\;=\;1,910\;min^{-1}$). This method offers the advantages of a commercially available substrate and short analysis time by a simple measurement of enzymatic activity of CPR.

• YAKHAK HOEJI
• /
• v.27 no.1
• /
• pp.45-52
• /
• 1983

The ability of gentamicin to form a stable coloured complex with copper (II) in a sodium carbonate buffer solution, which had a maximum absorption at 694nm, was used for the spectrophotometric quantitative determination of gentamicin sulfate. The calibration curve obtained was linear over the range of 200~2,000mcg per ml of the sample and the analysis was very well agreed with the microbiological method.

• Journal of Periodontal and Implant Science
• /
• v.53 no.4
• /
• pp.295-305
• /
• 2023

Purpose: Various methods have been proposed to achieve the nearly complete decontamination of the surface of implants affected by peri-implantitis. We investigated the in vitro debridement efficiency of multiple decontamination methods (Gracey curettes [GC], glycine air-polishing [G-Air], erythritol air-polishing [E-Air] and titanium brushes [TiB]) using a novel spectrophotometric ink-model in 3 different bone defect settings (30°, 60°, and 90°). Methods: Forty-five dental implants were stained with indelible ink and mounted in resin models, which simulated standardised peri-implantitis defects with different bone defect angulations (30°, 60°, and 90°). After each run of instrumentation, the implants were removed from the resin model, and the ink was dissolved in ethanol (97%). A spectrophotometric analysis was performed to detect colour remnants in order to measure the cumulative uncleaned surface area of the implants. Scanning electron microscopy images were taken to assess micromorphological surface changes. Results: Generally, the 60° bone defects were the easiest to debride, and the 30° defects were the most difficult (ink absorption peak: 0.26±0.04 for 60° defects; 0.32±0.06 for 30° defects; 0.27±0.04 for 90° defects). The most effective debridement method was TiB, independently of the bone defect type (TiB vs. GC: P<0.0001; TiB vs. G-Air: P=0.0017; TiB vs. GE-Air: P=0.0007). GE-Air appeared to be the least efficient method for biofilm debridement. Conclusions: T-brushes seem to be a promising decontamination method compared to the other techniques, whereas G-Air was less aggressive on the implant surface. The use of a spectrophotometric model was shown to be a novel but promising assessment method for in vitro ink studies.

• Restorative Dentistry and Endodontics
• /
• v.47 no.1
• /
• pp.8.1-8.9
• /
• 2022

Objectives: The aim of this study was to compare the color change of the Giomer resin composite (Beautifil-Bulk) by using photographs obtained with a smartphone (iPhone 6S) associated with Adobe Photoshop software (digital method), with the spectrophotometric method (Vita Easyshade) after immersion in different pigment solutions. Materials and Methods: Twenty resin composite samples with a diameter of 15.0 mm and thickness of 1.0 mm were confectioned in A2 color (n = 5). Photographs and initial color readings were performed with a smartphone and spectrophotometer, respectively. Then, samples were randomly divided and subjected to cycles of immersion in distilled water (control), açai, Coke, and tomato sauce, 3 times a day, 20 minutes for 7 days. Later, new photographs and color readings were taken. Results: The analysis (2-way analysis of variance, Holm-Sidak, p < 0.05) demonstrated no statistical difference (p < 0.005) between the methods in all groups. Similar color changes were observed for all pigment solutions when using the spectrophotometric method. For the digital method, all color changes were clinically unacceptable, with distilled water and tomato sauce similar to each other and with statistical differences (p < 0.005) for Coke and açai. Conclusions: Only the tomato sauce produced a color change above the acceptability threshold using both methods of color assessment. The spectrophotometric and digital methods produce different patterns of color change. According to our results, the spectrophotometric method is more recommended in color change assessment.

• Journal of the Korean Applied Science and Technology
• /
• v.3 no.2
• /
• pp.23-28
• /
• 1986

The sulfuric acid sulfonation mixtures of 2-aminonaphthalene, contained 2-aminonaphthalene, Dahl's acid, Broenner's acid, amino-F-acid and Baden acid, can be determined quantitatively by multicomponent spectrophotometric analysis. The analysis was performed in diluted sodium hydroxide aqueous solution and based on the ultraviolet absorption of the sodium salts of each isomers. The determination of quantity of each isomers was performed by subjection the absorbances of the unknown mixture and of its constituents, gathered at a large number of wavelengths, to a least square treatment by an electronic personer computer. This method provided a rapid analysis of such complex mixture, and the standard deviation was ${\pm}1.65$ mole %.

• 월간산업보건
• /
• s.49
• /
• pp.4-10
• /
• 1992