• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.426-428
• /
• 2003

Optical and microwave remote sensing data have been widely used in land cover and land use classification. Thanks to the spectral absorption characteristics of ground object in visible and near infrared region, optical data enables to extract different land cover types according to their material composition like water body, vegetation cover or bare land. On the other hand, microwave sensor receives backscatter radiance which contains information on surface roughness, object density and their 3-D structure that are very important complementary information to interpret land use and land cover. Separate use of these data have brought many successful results in practice. However, the accuracy of the land use / land cover established by this methodology still has some problems. One of the way to improve accuracy of the land use / land cover classification is just combination of both optical and microwave data in analysis. In this paper for the research, the author used LANDSAT TM scene 127/45 acquired on October 21, 1992, JERS-1 SAR scene 119/265 acquired on October 27, 1992 and aerial photographs taken on October 21, 1992. The study area has been selected in Hanoi City and surrounding area, Vietnam. This is a flat agricultural area with various land use types as water rice, secondary crops like maize, cassava, vegetables cultivation as cucumber, tomato etc. mixed with human settlement and some manufacture facilities as brick and ceramic factories. The use of only optical or microwave data could result in misclassification among some land use features as settlement and vegetables cultivation using frame stages. By combination of multitemporal JERS-1 SAR and TM data these errors have been eliminated so that accuracy of the final land use / land cover map has been improved. The paper describes a methodology for data combination and presents results achieved by the proposed approach.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제7권1호
• /
• pp.3-14
• /
• 2002

강원도 원주지역 암반대수층과 경기도 의왕지역 천층대수층에서 측정한 연속지하수위자료에 대해 시계열분석을 하였다. 연구에 사용한 시계열특성함수는 자기상관함수, 스펙트럼밀도함수, 그리고 상호상관함수이다. 분석결과 강원도 원주지역의 천층대수층의 지하수위는 자기상관성이 상대적으로 작고 상부토양층을 통한 강우의 직접적 침투에 민감하고 단열암반대수층의 지하수위는 상대적으로 외부자극(강우)에 안정적인데 이는 먼 곳으로부터 단열망을 통한 자극의 전파에 기인하거나 혹은 중간에 투수성이 낮은 비풍화편마암대의 영향으로 보인다. 의왕지역의 지하수위의 시계열적 특성은 원주지역의 단열암반대수층의 그것과 유사하다. 이는 지하수위측정 지역의 지하수함양이 직접적 강우침투보다는 광역적 함양과 그 스트레스의 전파에 기인하는 것으로 판단된다. 본 연구에서는 강우와 지하수위와의 시계열 분석이 지하수 함양기작 이해에 어떻게 이용되는지를 보여주었다.

• 한국항행학회논문지
• /
• 제17권6호
• /
• pp.693-699
• /
• 2013

본 논문에서는 ITU-R M.1842-1 표준 권고안 Annex1에 따르는 ${\pi}/4$-DQPSK 모뎀에 대해 분석하고 시뮬레이션을 수행하였다. 우선 VHF 대역의 해상 이동통신에 대한 표준 및 기술동향을 소개하였다. Annex1에 제시된 ${\pi}/4$-DQPSK 모뎀은 25KHz의 대역폭에서 28.8Kbps 비트전송률을 제공하도록 제시되어 있다. 송수신기에서 RRC필터를 채용하는 ${\pi}/4$-DQPSK 모뎀의 시뮬레이션 프로세스에 대해 설명하고, 다양한 시뮬레이션 결과(시간영영 신호파형, 성좌도, 롤오프 팩터에 따른 전력스펙트럼밀도, Eye 다이어그램)들과 모뎀의 BER 성능을 제시하였다. 시뮬레이션 결과로부터, RRC 필터의 롤오프 팩터에 의해서 SNR에 따른 BER 성능에 미치는 영향이 다름을 확인하였고, 설계한 시뮬레이션 모델이 ITU-R M.1842-1 권고안에 제시된 스펙트럼 마스크 요구사항을 만족함을 알 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.959-962
• /
• 2009

최근 모바일 시스템은 하나의 단말로 다양한 서비스망에서의 운용을 위해 Multi-core 시스템 형태로 연구되고 있다. 따라서 하나의 단말로 WCDMA, GSM, WiBro 를 지원할 수 있는 모바일 시스템들이 출현할 것으로 예상된다. 다양한 서비스망을 지원하기 위한 모바일 시스템은 SoC(System on Chip) 기술과 더불어 하나의 칩셋으로 구현이 가능하며 그에 따른 모뎀 구조가 필요하다. 또한 하나의 단말로 서로 다른 주파수 대역에서 운용되어야 하므로 시스템의 비선형 특성과 각 주파수 대역에 따른 비선형 특성이 문제가 된다. 본 논문에서는 Multi-core 시스템의 모뎀 구조를 제안하고 시스템이 갖는 비선형 특성에 대하여 분석하였다. Multi-core 시스템의 구조는 OFDM(Orthogonal Frequency Division Multiplexing) 과 MC-CDMA(Multi Carrier-Code Division Multiple Access)를 기본 시스템으로 하여 구조를 제안하였고 시스템이 갖는 비선형 특성은 PSD(Power Spectral Density)를 이용하여 분석하였다.

• Journal of the Optical Society of Korea
• /
• 제17권6호
• /
• pp.548-558
• /
• 2013

In this work, laser induced breakdown spectroscopy (LIBS) is used to investigate soil samples collected from different desert areas of Riyadh city in Saudi Arabia. Both qualitative analysis and plasma parameters are studied via the observed LIBS spectra. These experiments have been done using a Spectrolaser-7000 system with 50 mJ fundamental wavelength of Nd:YAG laser and detection delay time of 1 microsecond. Many spectral lines are highly resolved for many elements like Al, Fe, Mg, Si, Mn, Na, Ca and K. The electron temperatures Te and electron densities Ne, for the constituent of generated LIBS plasma, are determined for all the collected samples. It is found that both Te and Ne vary from one desert area to other. This variation is due to the change of the elemental concentration in different desert areas that affects the sample's matrices. Time dependent measurements have also been performed on the soil samples. While the signal-to-base ratio (SBR) reached its optimal value at 1 microsecond, the plasma parameters Ne and Te reach values of $4{\times}10^{17}cm^{-3}$ and 9235 K, respectively, at 2.5 microsecond. The later indicate that the plasma cooling processes are slow in comparison to the previously observed results for metallic samples. The observed results show also that in the future it is possible to enhance the exploitation of LIBS in the remote on-line environmental monitoring application, by following up only the values of Ne and Te for one element of the soil desert sample using an optical fiber probe.

• 한국작물학회지
• /
• 제64권2호
• /
• pp.159-164
• /
• 2019

Weed control is a crucial practice not only in organic farming, but also in modern agriculture because it can lead to loss in crop yield. In general, weed is distributed in patches heterogeneously in the field. These patches vary in size, shape, and density. Thus, it would be efficient if chemicals are sprayed on these patches rather than spraying uniformly in the field, which can pollute the environment and be cost prohibitive. In this sense, weed detection could be beneficial for sustainable agriculture. Studies have been conducted to detect weed patches in the field using remote sensing technologies, which can be classified into a method using image segmentation based on morphology and a method with vegetative indices based on the wavelength of light. In this study, the latter methodology has been used to detect the weed patches. As a result, it was found that the vegetative indices were easier to operate as it did not need any sophisticated algorithm for differentiating weeds from crop and soil as compared to the former method. Consequently, we demonstrated that the current method of using vegetative index is accurate enough to detect weed patches, and will be useful for farmers to control weeds with minimal use of chemicals and in a more precise manner.

• 천문학회보
• /
• 제44권1호
• /
• pp.42.2-42.2
• /
• 2019

Turbulence is one of the natural phenomena in molecular clouds. It affects gas density and velocity fluctuation within the molecular clouds and controls the mode and tempo of star formation. However, despite many years of study, the properties of turbulence remain poorly understood. As part of the Taeduk Radio Astronomy Observatory (TRAO) Key Science Program (KSP), "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale (TIMES; PI: Jeong-Eun Lee)", we have fully mapped two star-forming molecular clouds, the Orion A and the Ophiuchus molecular clouds, in 3 sets of lines ($^{13}CO$ J=1-0, $C^{18}O$ J=1-0, HCN J=1-0, $HCO^+$ J=1-0, CS J=2-1, and $N_2H^+$ J=1-0) using the TRAO 14-m telescope. We apply a statistical analysis, Principal Component Analysis (PCA), which can recover an underlying turbulent-power spectrum from an observed P-P-V spectral map. We compare turbulence properties not only between the two clouds, but also between different parts within each cloud. We present the first result of our observation program.

• Bulletin of the Korean Chemical Society
• /
• 제6권5호
• /
• pp.287-291
• /
• 1985

The addition of poly(styrenesulfonate) (PSS) to $Ru(bpy)_3^{2+}$ solutions shifted the emission peak by 3 nm to red, and increased emission intensity by 1.8 times. By contrast, poly(vinylsulfonate) (PVS) had little effect on the fluorescence spectrum. The effects of PSS on the spectral properties of $Ru(bpy)_3^{2+}$, were attributed to the presence of a hydrophobic phenyl group in PSS, which interact with $Ru(bpy)_3^{2+}$ by, at least in part, hydrophobic effect. The binding constant of $Ru(bpy)_3^{2+}$ to PSS in 0.1 M NaCl was $6{\times}10^4\;M^{-1}$, and this value was about $10^3$ times higher than those of methyl viologen ($MV^{2+}$) and $Cu^{2+}$. The Stern-Volmer constants of emission quenching of $Ru(bpy)_3^{2+}$ by $MV^{2+}$ and $Cu^{2+}$ in 0.1 M NaCl solutions were 426 and 40 $M^{-1}$, which correspond to second order rate constants($k_q$) of $1.1{\times}10^9\;and\; 1.0{\times}10^8\;M^{-1}s^{-1}$, respectively. The presence of PSS enhanced $K_{SV's}\;by\;{\sim}50$ times, whereas PVS increased the values only 1-4 times. The large enhancing effect of PSS, despite of lower charge density than PVS, was explained in terms of longer life-time of photoexcited $Ru(bpy)_3^{2+}$ bound to PSS and strong association of $Ru(bpy)_3^{2+}$ to PSS due to a specific interaction involving hydrophobic effect. The variation of $K_{SV's}$ on the concentrations of PVS and PSS were also investigated for $Ru(bpy)_3^{2+}-MV^{2+}\;and \;Ru(bpy)_3^{2+}-Cu^{2+}$ photoredox systems.

• Wind and Structures
• /
• 제32권3호
• /
• pp.227-238
• /
• 2021

This study analyzed the pressure patterns and local pressure of tall buildings with corner modifications (recessed and chamfered corner) using wind tunnel tests and proper orthogonal decomposition (POD). POD can distinguish pressure patterns by POD mode and more dominant pressure patterns can be found according to the order of POD modes. Results show that both recessed and chamfered corners effectively reduced wind-induced responses. Additionally, unique effects were observed depending on the ratio of corner modification. Tall building models with recessed corners showed fluctuations in the approaching wind flow in the first POD mode and vortex shedding effects in the second POD mode. With large corner modification, energy distribution became small in the first POD mode, which shows that the effect of the first POD mode reduced. Among building models with chamfered corners, vortex shedding effects appeared in the first POD mode, except for the model with the highest ratio of corner modifications. The POD confirmed that both recessed and chamfered corners play a role in reducing vortex shedding effects, and the normalized power spectral density peak value of modes showing vortex shedding was smaller than that of the building model with a square section. Vortex shedding effects were observed on the front corner surfaces resulting from corner modification, as with the side surface. For buildings with recessed corners, the local pressure on corner surfaces was larger than that of side surfaces. Moreover, the average wind pressure was effectively reduced to 88.42% and 92.40% in RE1 on the windward surface and CH1 on the side surface, respectively.

• 한국포장학회지
• /
• 제27권3호
• /
• pp.175-180
• /
• 2021

Although it has recently been regulated for use as an eco-friendly policy in Korea, the use of EPS (Expanded Polystyrene) cooling boxes, which are used as cold chain delivery insulation boxes for fresh agricultural and livestock products, is also increasing rapidly as e-commerce logistics such as delivery have increased rapidly due to COVID-19. Studies were conducted to optimize the EPS cooling container through internal air heat flow of CFD (Computational Fluid Dynamics) analysis and FEM (Finite Element Method) random vibration analysis using domestic PSD (Power Spectral Density) profile of the EPS cooling box to which the refrigerant is applied in this study. In the analysis of the internal air heat flow by the refrigerant in the EPS cooling box, the application of vertical protrusions inside was excellent in volume heat flow and internal air temperature distribution. In addition, as a result of random vibration analysis, the internal vertical protrusion gives the rigid effect of the cooling box, so that displacement and stress generation due to vibration during transport are smaller than that of a general cooling container without protrusion. By utilizing the resonance point (frequency) of the EPS cooling box derived by the Model analysis of ANSYS Software, it can be applied to the insulation and cushion packaging design of the EPS product line, which is widely used as insulation and cushion materials.