• KIEAE Journal
• /
• 제12권3호
• /
• pp.101-106
• /
• 2012

Lighting energy accounts for approximately 20% of the electrical energy used worldwide. Thus, High efficiency Light emitting diode(LED)lighting is getting more popular as the next generation lighting replaced to traditional lighting fixtures. Also, LED lighting not only has a long lifetime but also can realize a variety visual environments through the wavelengh control. The lighting energy varies depending on the Spectral Power Distribution(SPD) even though the Illuminance level is same. Therefore, This study indicates that the difference of indoor energy consumption under the same illuminance level when Spectral Power Distribution(SPD) is different. As a result, Lighting energy consumption under red-color emphasizing SPD is about 10% lower than under blue-color emphasizing SPDs.

• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.7-17
• /
• 2015

Changes in melatonin concentration levels by differences in CCT of white LED light focused on Spectral Power Distribution (SPD) differences compared to the same CCT of conventional fluorescent light were analyzed. For this, melatonin concentration levels in saliva samples were taken over four different experiments at seven-day intervals. In 71.4% of participants, it was confirmed that melatonin concentration is suppressed by exposure to light, and a slight difference was observed by different CCTs. In addition, Experiment II with a high CCT was relatively high in terms of the melatonin suppression rate compared to Experiment III. A key finding was the possibility that different SPDs under a particular CCT of white LED light compared to the same CCT of conventional fluorescent light could have the same effect on the melatonin suppression.

• 인터넷정보학회논문지
• /
• 제24권2호
• /
• pp.19-26
• /
• 2023

인간은 자연 빛에 적응하고 진화해왔으나 현재는 실내 생활의 비중이 높아짐에 따라 생체리듬 교란의 문제가 유발되었다. 이의 해결을 위해 일출~일몰간 다채롭게 변화하는 자연광의 색온도를 재현하는 조명이 연구되고 있다. 자연광 색온도의 재현을 위해서는 색온도가 다른 다수의 LED 광원을 사용하여 조명을 제작한 후 수백에서 수천 단계의 광원별 인가전류의 조합에 대한 광특성을 측정 및 수집하여 제어지표 DB를 구성하고 광특성 매칭 방법을 통해 조명을 제어하였다. 이러한 제어 방법은 인가전류의 조합 단계를 세밀하게 할수록 많은 시간 및 경제적 비용이 발생한다는 문제가 있다. 이에 본 논문에서는 LED 광원별 최소 분광분포로 보간 및 조합 연산을 수행하여 자연광 색온도를 재현하는 방법을 제안한다. 먼저 색온도가 다른 광원 채널로 구성되고 각 채널별 256단계의 인가전류 제어 기능을 구현한 LED 조명을 대상으로 채널별 5개의 최소 분광분포(Spectral Power Distribution, SPD)를 실측·수집한다. 이후 수집한 SPD를 대상으로 각 채널별 256단계의 SPD를 생성하는 보간 연산을 수행하고, 채널별 SPD의 조합 연산을 통해 LED 조명의 모든 제어 조합에 대한 SPD를 생성한다. 생성된 SPD를 통해 조도와 색온도를 산출하여 제어지표 DB를 구축한 후 매칭 기법을 통해 자연광의 색온도를 재현한다. 성능 평가에서는 실내 권장 조도 기준을 충족하면서도 평균 오차율 0.18%의 범위 내에서 자연광의 시간별 색온도를 제공하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.168-173
• /
• 2011

Recently, from a saving energy and environmental lighting sources point of view, using LED lighting have been increased rapidly. The colors of light was applied to the control of dimmers that is composed of red, green, blue, and white(RGBW) to improve the quality of visual environment. Moreover this study has been processed to develop adjustable dynamic LED lighting system on SPD and definitize the various spectral power distribution and color temperature of light through the control of the four dimmers. It is possible to combine up to $432^4$ kinds of light. Measurement of illuminance of range on working surface was as 7~l,831 lux. Application of visual environment for occupants can be expected according to control of lighting performance.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.3207-3213
• /
• 2011

조명 변화에 관계없이 물체의 원래 색을 결정할 수 있는 색 항등성 기법은 저조도 환경에 적합하지 않다. 이러한 저조도 환경을 고려한 색 항등성 기법을 위해 우선적으로 다양한 저조도 환경의 영상이 필요하다. 본 논문에서는 분광 데이터에 기반한 저조도 합성 영상 집합과 저조도 자연 영상 집합을 생성한다. 합성 영상 집합은 380~780nm의 5nm 단위로 보간된 카메라의 센서 반응 함수, 일루미넌트 분광분포(SPD) 그리고 분광 반사율 곡선을 사용하여 생성되며, 52,000개의 영상들로 구성된다. 자연 영상 집합은 Ebner 데이터 집합과 일루미넌트의 SPD를 기반으로 생성한 4,970개의 영상들로 구성된다. 영상 집합은 실측 분광 데이터와 물리적인 영상 형성 모델을 바탕으로 생성되기 때문에 저조도 환경에서의 색 변화 및 분포를 객관적이고 정량적으로 분석하는 것이 가능한 장점을 갖는다. 또한, 이 영상 집합은 Ground Truth Data를 포함하고 있어 색 항등성 기법의 평가를 위해 사용될 수 있다.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.397-404
• /
• 2001

The accurate representation of the colors of dyed fabric on a color CRT(cathode ray tube) screen is the basis for the automatic process in dyeing industry. In the former study, we had focused on the theoretically color matching method between CIE(International Commission on illumination) and RGB color coordinates, but In this study we tried simulating the colors obtained from fabrics on the color CRT by using experimental method. we obtained the following results. 1. We could simulate all of the color CRT by gamut mapping method, even though some of the KOSCOTE(Korea Standard Color of Textile) colors represented on the color CRT didn't exist in the region of color region 2. We could do conditional matching by CIE system, even though it was hard to do invariant matching the Red, Green, Blue phosphors of the color CRT because of the SPD(Spectral Power Distribution) which had been set up before. 3. We could simulate all the colors obtained from fabrics on the color CRT by matching those two color groups from KOSCOTE fabrics and color CRT using match algorithm and matching programs. 4. If we get over on obstacles by grafting CCM and CCK machines which have been used in educational and industrial areas by matching KOSCOTE with color CRT we will be able to invent color simulation system controled automatically.

• 한국염색가공학회지
• /
• 제13권6호
• /
• pp.39-39
• /
• 2001

The accurate representation of the colors of dyed fabric on a color CRT(cathode ray tube) screen is the basis for the automatic process in dyeing industry. In the former study, we had focused on the theoretically color matching method between CIE(International Commission on Illumination) and RGB color coordinates, but In this study we tried simulating the colors obtained from fabrics on the color CRT by using experimental method. we obtained the following results. 1. We could simulate all of the color CRT by gamut mapping method, even though some of the KOSCOTE(Korea Standard Color of Textile) colors represented on the color CRT didn′t exist in the region of color region. 2. We could do conditional matching by CIE system, even though it was hard to do invariant matching the Red, Green, Blue phosphers of the color CRT because of the SPD(Spectral Power Distribution) which had been set up before. 3. We could simulate all the colors obtained from fabrics on the color CRT by matching those two color groups from KOSCOTE fabrics and color CRT using match algorithm and matching programs. 4. If we get over on obstacles by grafting CCM and CCK machines which have been used in educational and industrial areas by matching KOSCOTE with color CRT we will be able to invent color simulation system controled automatically.