• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1055-1057
• /
• 2003

In this research, the concrete with paint film was classified using hyper-spectral remote sensing. First, spectral characteristics of concrete and concrete with some kinds of paint films were investigated with a spectrometer. Second, using reflectance and first order derivative, spectral characteristics of the normal concrete and the concrete with paint film were classified. By using hyper-spectral remote sensing, not only extraction of crack but also inspection of paint film distribution is possible.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04a
• /
• pp.70-71
• /
• 2009

Photoelectric characteristics of a hydrogenated amorphous silicon thin film transistor(a-Si:H TFT) were obtained for the illumination from various backlight sources and the results were compared and analyzed in terms of the photon energy spectral characteristics of the backlights obtained from the integration of the multiplication of the photon energy and the spectral intensity at etch wavelength. It was possible to conclude that the absorption of illuminated backlight to a-Si:H layer and the generation of electrons and holes are mainly carried out at the wavelength less than 500nm.

• Ocean Systems Engineering
• /
• v.8 no.3
• /
• pp.281-312
• /
• 2018

Characteristics of a turbulence wind model control the magnitude and frequency distribution of wind loading on floating offshore wind turbines (FOWTs), and an in-depth understanding of how wind spectral characteristics affect the responses, and ultimately the design cost of system components, is in shortage in the offshore wind industry. Wind spectrum models as well as turbulence intensity curves recommended by the International Electrotechnical Commission (IEC) have characteristics derived from land-based sites, and have been widely adopted in offshore wind projects (in the absence of site-specific offshore data) without sufficient assessment of design implications. In this paper, effects of wind spectra and turbulence intensities on the strength or extreme responses of a 5 MW floating offshore wind turbine are investigated. The impact of different wind spectral parameters on the extreme blade loads, nacelle accelerations, towertop motions, towerbase loads, platform motions and accelerations, and mooring line tensions are presented and discussed. Results highlight the need to consider the appropriateness of a wind spectral model implemented in the strength design of FOWT structures.

• The Journal of Information Technology
• /
• v.8 no.3
• /
• pp.51-56
• /
• 2005

In this paper, we describe a study on the relationship between spectral sensitization and photographic characteristics of color paper. The photographic emulsion used in this study is a green-sensitizing emulsion. U.V maximum absorption peak value of 9-phenyl-5,5'-diphenyl-3,3'-bis(3-sulfopropyl)benzoxazolo carbocyanine triethyl ammonium salt was observed 507nm, and wedge spectrograms maximum peak value of color paper added dye to photographic emulsion was shown 553nm. As compared with the absorption peak of the dye in methanol solution, the sensitizing peaks of 9-phenyl-5,5'-diphenyl-3,3'-bis(3-sulfopropyl)benzoxazolo carbocyanine triethyl ammonium salt have red shifts of 46nm. The photographic characteristics of green-sensitizing emulsion were obtained contrast(2.6), speed(48-57), fog(0.08). Therefore, benzoxazolo carbocyanine dye is of industrial importance as green-sensitizing dye in the spectral sensitization of photographic emulsion.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.422-425
• /
• 2005

Spectral characteristics depending on soil constituents and their proportion in a soil were firstly studied for monitoring of soil contamination using hyperspectral remote sensing. The reflectance spectra of heavy metals in soils were investigated in the VIS-NIR-SWIR regions (400-2500 nm) to observe spectral variation as a function of constituents and concentrations. Commercial kaolinite soils mixed with lead, copper, arsenic, and cadmium were used as synthetic soil samples for spectral measurement. In case of copper, relatively spectrally active regions was observed with some band shift whereas other heavy metals had only simple spectral variations expected to be related to the sorption phase and the amount of metal onto kaolinite. The reflectance spectrum of each metal on kaolinite could be identified in VIS-NIR region.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.1
• /
• pp.43-52
• /
• 2021

According to several seismic design standards, a ground motion time history should be selected similar to the design response spectrum, or a ground motion time history should be modified by matching procedure to the design response spectrum through the time-domain method. For the response spectrum matching procedure, appropriate seed ground motions need to be selected to maintain recorded earthquake accelerogram characteristics. However, there are no specific criteria for selecting the seed ground motions for applying this methodology. In this study, the characteristics of ground motion time histories between seed motions and spectral matched motions were compared. Intensity measures used in the design were compared, and their change by spectral matching procedure was quantified. In addition, the seed ground motion sets were determined according to the response spectrum shape, and these sets analyzed the response of nonlinear and equivalent linear single degrees of freedom systems to present the seed motion selection conditions for spectral matching. As a result, several considerations for applying the time domain spectral matching method were presented.

• Journal of Forest and Environmental Science
• /
• v.24 no.3
• /
• pp.165-169
• /
• 2008

This study attempts to analyze the relationship between forest volume and age based on 5th NFI data and spectral characteristics of satellite imagery using ASTER sensor in Korea. Forest stand volume and age had the negative correlation with the spectral reflectance in all of the band (Blue, Green, Red, SWIR). With increasing of stand volume and age, spectral reflectance decrease. The spectral reflectance of band1 showed the highest correlation between stand volume and spectral reflectance among the VNIR wavelength. The spectral reflectance band 1, 2 (visible wavelength) and stand age have high correlation compared to other bands. The correlation coefficients between forest volume and vegetation indices have low relationship. This result indicates that the reflectance of blue band may be important factor to improve the potential of optical remote sensing data to estimate forest volume and age.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.2
• /
• pp.33-40
• /
• 2005

The objective of this research was to find an indirect method to estimate spectral reflectance and NDVI(Normalized Difference Vegetation Index) efficiently, using the spectroradiometer and NOAA AVHRR satellite data. For collecting RS base data, used spectro-radiometer that measures reflection characteristics between 300~1,100nm was used and measured the reflection of vegetation from paddy rice during the growing season at Chungbuk national university's farm in 2002. The feasibility of detecting the temporal variation in the spectral reflectance and NDVI in paddy rice were conducted on eight growth stages. AVHRR data were collected in eight different months over a one year period in 2002. The results were compared with those obtained by analyzing NDVI characteristics. The spectral reflectance and NDVI of paddy rice have a great effect on the growth condition. Considerably, NDVI was increased by developing muscle fiber tissue at the near infrared wavelength until the Booting stage. Then the NDVI increased until the Maturity stage and then decreased until harvest. The highest month was at July and the lower month was at March. The difference NDVI analysis using March and another months data was conducted, the results were provided information on the growth condition of crops.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.12 no.1
• /
• pp.21-25
• /
• 2006

Measurements of accelerometer levels transmitted from the floor in commercials truck shipments were carried out transportation of 300 Kg-load from Gyungbu Highway(Waegouan-Seoul) to 88 Highway(Gwangju-Daegu). Different characteristics were observed the values measured the vibration levels with directions in the two Highway's as a function of road condition and truck speed. The results showed that the vibration levels of the Gyungbu Highway is much higher than those of the 88 Highway. A following analysis on the obtained values was used to get the acceleration spectral density (ASD) and power spectral density (PSD). For the entire transit route, the results showed that the level of vibration to vertical direction was significant effects for damaging the products carried compared to other directions such as longitudinal and transverse. This paper provides an updated history of measured characteristics of vibration levels for highways using mainly in domestic area.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.831-834
• /
• 2008

The spectral element model is known to provide very accurate structural dynamic characteristics, while reducing the number of degree-of-freedom to resolve the computational and cost problems. Thus, the spectral element model with variational method for an axially moving Bernoulli-Euler beam subjected to axial tension is developed in the present paper. The high accuracy of the spectral element model is the verified by comparing its solutions with the conventional finite element solutions and exact analytical solutions. The effects of the moving speed and axial tension the vibration characteristics, wave characteristics, and the static and dynamic stabilities of a moving beam are investigated.