• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.93-98
• /
• 2018

This study was wanted to confirm ability for UV blocking according to its material. The lenses materials were Acryl, CR-39, NK-55, and MR-8. It was grouped: Group A consisting of anti-scratch hard coated lenses and anti-refractive multi coated lenses, Group B added UV blocking coating on the group A, and Group C consisting of only UV blocking lenses. The results measured UV transmittance, On the UV-A wavelength, Group A showed the UV transmittance of 7.726%, 0.043%, 0.007%, and 0.007% respectively. Group B showed 0.038%, 0.037%, 0.007%, and 0.007%, respectively. The UV-blocking performance of CR-39 has been greatly improved. Group C has shown the best UV blocking function; only 0.005% and 0.004% of UV transmittances.(1.60 and 1.67 index of refraction respectively). For the low power of lenses and sunglasses, the CR-39 lens is the most used. Therefore, to UV blocking from the lens, new materials or UV absorbers or UV coating technology and development of Converged Technologies are required.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.171-174
• /
• 2010

본 논문에서는 렌즈의 흠집을 추출할 수 있는 퍼지 기법을 이용한 렌즈 흠집 검출 방법을 제안한다. 제안된 방법은 렌즈 영상을 그레이 영상으로 변환한 후, 캐니 마스크를 이용하여 렌즈의 경계선을 추출한다. 추출된 렌즈의 경계선에 대해 평균 이진화와 모폴로지를 이용하여 렌즈 경계선을 보정한다. 렌즈 경계선이 보정된 영상에서 Seed Fill 알고리즘을 적용하여 렌즈의 내부 영역만을 추출한다. 추출된 렌즈의 내부 영역에 해당하는 원 영상에서 소벨 마스크를 적용하여 렌즈 내부 영역의 에지를 추출한다. 렌즈 내부 영역에서 추출된 에지 객체들의 정보를 이용하여 흠집과 비흠집을 분류하는 퍼지 기법을 적용하여 흠집 영역을 추출한다. 본 논문에서 제안된 렌즈의 흠집 검출 방법의 성능을 평가하기 위해 CHEMI, MID, HL, HM 시력 보정용 렌즈를 대상으로 실험한 결과, 제안된 방법이 흠집을 효과적으로 검출하는 것을 확인하였다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.197-202
• /
• 2004

The aim of this work is to improve the mechanical properties of materials for glasses lens cutting at $1920^{\circ}C$ using SrO as sintering additive. The heating rate was $15^{\circ}C/min$ and the cooling rate about $25^{\circ}C/min$ from the sintering temperature to $1000^{\circ}C$. SEM analysis and XRD of the surface of samples were carried out. Microstructures of sintered materials were strongly dependent on the composition of sintering additives. The fracture toughness and hardness were increased by increasing the SrO. Typical fracture toughness and hardness of materials for glasses lens cutting were $5.6{\pm}0.3MPa{\cdot}m^{1/2}$ and $16.2{\pm}0.5GPa$, respectively.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.25-30
• /
• 2010

Purpose: This study was conducted to estimate the changes of corrected diopter and corrected visual acuity with the change in vertex distance. Also we aimed to provide basic data for refraction test. Methods: Using the trial lens, we measured the corrected diopter and corrected visual acuity after performing binocular balance test. We measured the changes of corrected diopter and corrected visual acuity in change of vertex distance. We analyzed statistical significance and relations between vertex distance and corrected diopter and corrected visual acuity. Results: There was no difference in corrected diopter with the change of vertex distance within -1.00D, but the corrected diopter increased with it over - 1.25D. In particular, the change of diopter was largest when the vertex distance increased 15 mm. At over 11.00D, there was large changes of diopter with the changes of vertex distance at 5 mm, 10 mm and 15 mm. On correlation analysis between the vertex distance and the corrected diopter, there was strong correlation (r=0.999 at 5 mm increase of vertex distance, r=0.982 at 10 mm increase and r=0.957 at 15 mm increase) and also there was significant (p<0.01). At the change of visual acuity in increased of vertex distance, the range of a decrease in visual acuity was large when the changes of vertex distance was largest. On correlation analysis between the vertex distance and the corrected visual acuity, there was strong correlation (r=0.969 at 5 mm increase of vertex distance, r=0.985 at 10 mm increase and r=0.994 at 15 mm increase) and also there was significant (p<0.01). Conclusions: The vertex distance was very important at the refraction test and at wearing spectacle. On correlation analysis between the vertex distance and the corrected diopter, and the corrected visual acuity, there was strong correlation and statistically significant. Therefore, the vertex distance should be kept at the refraction using trial lens, and the best fitting was made not to slipping forward, and so we suggested regular refitting of spectacle and the managing method of spectacle were educated to the spectacle wearers.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.1
• /
• pp.45-51
• /
• 2013

Purpose: This study was performed to provide indicator of expected aniseikonia by correcting refractive error and to investigate influential factors on aniseikonia. Methods: 20 college students (14 males, 6 females, a mean age of $22.50{\pm}2.72$ years) were selected as subjects whose refractive error with spherical equivalent were within ${\pm}0.50$ D, corrected visual acuity were more than 1.0, and aniseikonia values by AWAYA were less than 1%. After correcting refractive error with spectacles in anisometropia induced by wearing contact lens on their dominant eye or non-dominant eye, practical measured values of aniseikonia were compared with theoretical expected values of it by the formula of spectacle magnification. Results: Practical measured values were higher than theoretical expected values in induced aniseikonia over the whole range of diopter of wearing contact lens. And there was higher measured value of aniseikonia in case of higher diopter of wearing contact lens to induce anisometropia and correcting refractive error with spectacles of (+) diopter after wearing contact lens of (-) diopter to induced anisometropia in dominant eye of women. Conclusions: It is considered that dominant eye plays more important role for visual function in induced aniseikonia and factors such as the induced eye of aniseikonia, the diopter of wearing contact lens, and gender have influenced on aniseikonia.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.4
• /
• pp.471-476
• /
• 2015

Purpose: We have analyzed the transmittance distribution of various ocular lenses using local transmittance microscope to investigate the optical homogeneity of the lens. Methods: The local transmittance of the laser which is focused on the surface of the spectacle lens was measured by using the photo-detector, lock-in amplifier and motorized-stage. 25 multi-coated lenses with non-tinted of 5 groups and 45 multicoated lenses with tinted of 9 groups were analyzed as a sample respectively. Results: Average and deviation of local transmittance for nontinted lenses were measured almost uniformly with various refractive index and coating. However, deviation of transmittance of for tinted lenses was analyzed as about 3.7 times larger than that of non-tinted lenses. Inhomogeneity of local transmittance of for tinted lenses was also analyzed as about 3.1 times larger than that of non-tinted lenses. Conclusions: We could analyze that standard deviation of transmittance and inhomogeneity of local transmittance of for tinted lenses is larger than that of non-tinted lenses using the local transmittance microscope. These analysis using local transmittance microscope can be utilized as a way to evaluate lens performance and improve optical homogeneity.

• Journal of Korean Ophthalmic Optics Society
• /
• v.1 no.1
• /
• pp.73-84
• /
• 1996

Satisfactory for children's spectacles fitting can only be achieved with the resonable selection and assortment of frames of different pad shapes, size, materials, the general property of sample frame are flexibility for the temple. Loughness for bridge and variety for the length of temple, a selection of the lens is chosen usually by the characteristic of the power, safty, size and so on, it will be comport fit of frame controlled the hight and width of pad and angle of pad between the nose side, frontal angle of pad will be determinded that whether a frame may be capable of providing a comport fit. An important part of the fitting of spectacles is the final adjustment before the wearer takes them away, and also their continued adjustment to maintain the optimum comport and lens efficiency. It is suggested that spectacle adjustment is essentially a practical art that can only be acquired by continual practice.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.77-83
• /
• 2003

To investigate the influence of the variation of conic coefficient of the front surface on the RMS SD(Root Mean Square Spot Diameter) in a back focal plane, we use programs which are Cove V and LOSA 2.0. We consider a spectacle lens with back vertex power of -4.00D, diameter of 70 mm, the front surface powers which are 2.00D, 4.00D, 6.00D, and 8.00D, and the indices which are $n_d$=1.498, 1.523, 1.586, and 1.660, respectively. The RMS SD in the back focal plane and the thickness of an aspherical tens having the optimized conic constant are smaller than those of a spherical lens. The RMS SD in the back focal plane decreases as the front surface power decreases. From these results, we determine the optimized conic constant to improve the optical image quality and decrease RMS SD in the back focal plane.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.1
• /
• pp.181-188
• /
• 2004

Monovision is defined as correcting one eye for distance vision and the other eye for near vision. Single-vision contact lenses are used for each eye. The patient selectively suppresses one eye while using the other eye. This study was performed to measure binocular function and patient satisfaction with monovision induced by adding +3.00D to spectacle prescription for distance vision in nonpresbyopic students. This study comprised 144 nonpresbyopic students with monovision induced by adding +3.00D to spectacle prescription. Monovision was induced by undercorrecting the nondominant eye by adding 3.00 diopters for near vision and correcting the dominant eye with emmetropia for distance vision. For research of the binocular function on Monovision. This study was tested the obstacle course, water pouring test, catching and throwing, bead classification including the stereopsis test. These tests were comparative to the normal binocular state. As a results, the stereopsis have a significant reductions in Monovision. There was no significantly difference between monovision group and control group in monovision exercise (obstacle course, water pouring test, catching and throwing, and bead sorting) at near and distance. This study indicates that monovision is an effective and reasonable therapeutic modality for correcting presbyopia. By the application of above methods, this study could be used the student for the practical practice and understand on the Monovison.

• Journal of Korean Clinical Health Science
• /
• v.8 no.1
• /
• pp.1386-1397
• /
• 2020

Purpose: To examine the effectiveness of various treatments; bifocal spectacles, orthokeratology, atropine, and time spent in outdoors; in slowing down the myopia progression for Asian adolescents (6-18age). Methods: The research focused on examining the most effective treatment in controlling myopia based on the literature sources that have been published. Through meta-analysis of various research papers that already has been done in this field, a lot of data was collected. For each treatment, the difference in axial length and spherical equivalent over time was measured and recorded. To quantitatively record the difference, both axial length and spherical equivalent was determined by value of control group value of treatment group. The paper compared the effectiveness of each treatment based on the data that was measured. Results: Adolescents who chose to spend time outdoors in order to slow down myopia progression had axial length difference of 0.03 mm and spherical equivalent difference of 0.17 D. Adolescents that used atropine had axial length difference of 0.36 mm and spherical equivalent difference of 0.92 D. Bifocal spectacle resulted in axial length difference of 0.21 mm and spherical equivalent difference of 0.59 D, and for orthokeratology 0.23 mm and 0.04 D, respectively. Axial length wise, myopia was most controlled by the atropine since there was a greatest difference between the group that got the treatment and the group that did not have the treatment. According to the spherical equivalent difference data, myopia was most controlled by atropine. Conclusion: Atropine showed the most effective result in controlling myopia among the four treatment. Again, compared to other three treatment, using atropine appeared to have greatest ability in slowing down myopia progression since adolescents who were treated with atropine had greatest difference from adolescents in the control group that had the same condition but didn't get the treatment. However, every treatment was only used for 2 or 3 years which is quite short time period to measure the long term effect of the four treatments. Also, since atropine is a pharmaceutical method to control myopia, it may harm adolescents' eyes compared to optical or environmental treatment.