• 한국추진공학회지
• /
• 제17권1호
• /
• pp.35-41
• /
• 2013

75톤 추력급 터보펌프 터빈의 토크 특성을 성능시험 데이터를 바탕으로 분석하였다. 터빈의 토크는 해석적으로 고정된 압력비에서 보정 선속도의 일차함수로 표현되며 이를 시험적으로 확인하였다. 일정 압력비 이상의 영역에서는 보정선속도-무차원 토크 변화가 일정하게 나타나는 현상도 아울러 발견하였다. 분석된 토크 특성과 파이로 시동기의 시험 측정 데이터를 이용하여 터보펌프의 시동특성을 예측한 결과 터보펌프 설계회전수의 약 50%의 수준에 이르는 시간은 0.7초 이내인 것으로 나타났다. 파이로 시동기에서 터빈입구까지의 열손실은 최대회전수를 90 rpm 정도 줄어들게 하는 것으로 예측되었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.586-589
• /
• 2018

도로 교통 시스템에 빅데이터 기술이 융합되면서 운전자와 보행자에게 편리하고 도움이 되는 새로운 서비스들이 생겨나고 있다. 다양한 교통 데이터를 수집하고 분석함으로써 교통 시스템에서 흔히 발생할 수 있는 정체 현상 또는 교통량 등을 예측하는 모델이 개발되고 있다. 본 논문에서는 대구시에서 수집한 택시 경로 데이터를 이용하여 대구시의 지도 위에 해당 데이터를 시각화한다. 그 다음으로 대구 시 내의 도로 구간을 설정하고, 택시 데이터의 위치와 속도 데이터, 그리고 도로 구간 정보를 이용하여 해당 구간의 교통량과 구간에서의 차량 평균 속도를 구한다. 이 결과를 이용하여 특정 도로 구간에 대한 교통 시스템 문제 파악에 도움을 주고자 한다.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.60-66
• /
• 2013

The wind-speeds among geographically close wind-farms have high correlations seasonally. This paper presents a novel wind-speed sampling method which sincerely reflects the correlation among wind-speeds of different wind-farms. In the proposed method, the wind-speed samples are generated through the statistical data analysis of the measured past wind-speed data and are adequate to be applied to generation adequacy assessment based on random sampling. In the proposed method, the specific probability distribution need not to be assumed and sufficiently accurate wind-speed samples can be generated based only on the measured past data. The proposed method is applied to the two wind-farm problem to show its applicability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.352-357
• /
• 1997

The development of very high speed train system is a complex series of interrelated tasks, many of which have some degree of uncertainty associated with the successful outcome. Successful projects recognize and provide for the major uncertainties and technical unknowns with specific development strategies. The development strategies described in this paper incorporated the experiences of the advanced countries in high speed train technologies, the current technical status of Korean industries and the operating requirements of Korean High Speed Railway.

• Composites Research
• /
• 제13권4호
• /
• pp.11-18
• /
• 2000

본 연구는 공기압축기에 적용되는 피스턴링의 재료에 자기윤활성 재료를 이용할 경우 어떠한 마찰마모 특성을 나타내는가를 비교평가 함으로써 실제 적용여부의 가능성을 확인하였으며, 주요 결과로는 동을 중량비 30% 함유한 시험편이 평균마찰계수 및 비마모량이 가장 적었다. 이는 마찰계수에 직접적인 영향을 주는 마모유동막이 조기에 다량 생성될 경우 낮은 마찰계수와 함께 안정화 효과에 큰 영향을 주며 비마모량은 발생된 마모유동막의 경도와 비례하고 용융마모에 의해 덩어리 형태로 탈락되는 마모분이 가장 적기 때문이라고 생각된다.

• 한국분말재료학회지
• /
• 제11권6호
• /
• pp.493-502
• /
• 2004

In this study, nano-sized indium oxide powder with the average particle size below 100 nm is fab-ricated from the indium chloride solution by the spray pyrolysis process. The effects of the reaction temperature, the concentration of raw material solution and the inlet speed of solution on the properties of powder were studied. As the reaction temperature increased from 850 to $1000^{\circ}C$, the average particle size of produced powder increased from 30 to 100 nm, and microstructure became more solid, the particle size distribution was more irregular, the intensity of a XRD peak increased and specific surface area decreased. As the indium concentration of the raw material solution increased from 40 to 350 g/l, the average particle size of the powder gradually increased from 20 to 60 nm, yet the particle size distribution appeared more irregular, the intensity of a XRD peak increased and spe-cific surface area decreased. As the inlet speed of solution increased from 2 to 5 cc/min., the average particle size of the powder decreased and the particle size distribution became more homogeneous. In case of the inlet speed of 10 cc/min, the average particle size was larger and the particle size distribution was much irregular compared with the inlet speed of 5 cc/min. As the inlet speed of solution was 50 cc/min, the average particle size was smaller and microstructure of the powder was less solid compared with the inlet speed of 10 cc/min. The intensity of a XRD peak and the variation of specific area of the powder had the same tendency with the variation of the average par-ticle size.

• 지역연구
• /
• 제40권2호
• /
• pp.91-106
• /
• 2024

전 세계적으로 지방소멸 시대에 직면한 여러 국가에서는 지역 접근성 향상과 인구집중 현상 해소를 위해 고속철도 확장을 지속하고 있다. 본 연구는 2012년부터 2019년까지 지방소멸 위험 수준을 고려하여, 고속철도의 운영이 한국 지자체의 연령대별 인구 이동에 미치는 영향을 실증적으로 분석하였다. 이를 위해 종속변수로 연령대별 순유입 인구를 사용하였으며, 분석 모형으로 패널 공간자기회귀모형을 선정하였다. 연구 결과, 고속철도가 지역 인구 유입에 미치는 영향은 지방소멸 위험 수준에 따라 상반되는 것으로 나타났다. 즉, 고속철도의 운행은 수도권과 일부 광역시에는 인구 유입의 효과를 가져왔지만 그 외 지역에서는 인구 유출을 설명했다. 고속철도는 특히 생산 가능 인구를 대표하는 청장년층 인구 유입에 높은 영향을 미쳤지만, 이러한 효과 또한 소멸 위험이 적은 지역에 한정되었다. 본 연구의 결과는 지역 균형발전과 지방소멸 해소를 위한 고속철도 설치 시 계획인구와 산업의 도입 등이 함께 고려되어야 함을 강조한다. 또한 지역별 소멸 위험 수준에 따라 인구 구조와 유입에 긍정적 영향을 발생시키는 요인을 탐색하는 후속 연구와 각 지자체의 상황에 맞는 새로운 정책 도입의 필요성을 시사한다.

• Journal of Biosystems Engineering
• /
• 제31권1호
• /
• pp.33-38
• /
• 2006

This work was conducted to find the operating characteristics of an efficient wet grinding system designed to obtain fine rice husk ash powder. Once the rice husk was combusted and the thermal energy was recovered from the furnace, the ash was fed and pulverized in the grinding system resulting a fine powder to be used as a supplementary adding material to the portland cement. Grinding time (15, 30, 45 min), impeller speed (250, 500, 750 rpm), and mixed ratio (6.7, 8.4, 11.l, 20.9) were three operating factors examined for the performance of a wet-type stirred ball mill grinding system. For the operating conditions employed, mean diameter of fine ash powder, specific energy input, and grinding energy efficiency were in the range of $2.83{\sim}9.58{\mu}m,\;0.5{\sim}6.73kWh/kg,\;and\;0.51{\sim}3.27m^2/Wh$, respectively. With the wet-type stirred ball mill grinding system used in this study, the grinding energy efficiency decreased with the increase in total grinding time, impeller speed, and mixed ratio. The difference in specific surface area of powder linearly increased with logarithm in total number of impeller revolution and the grinding energy efficiency linearly decreased. Grinding time of 45 min, impeller speed of 500 rpm, and mixed ratio of 6.7 were chosen as the best operating condition. At this condition, mean particle diameter of the fine ash, grinding energy efficiency, grinding throughput, and specific energy input were $2.84{\mu}m,\;2.28m^2/Wh,\;0.17kg/h$, and 2.03kWh/kg, respectively. Wet fine grinding which generates no fly dust causing pollution and makes continuous operation easy, is appeared to be a promising solution to the automatization of rice husk ash grinding process.

• 소음진동
• /
• 제11권2호
• /
• pp.354-364
• /
• 2001

The vibration induced by high speed train running on rail is dealt with as an environmental problem. The train induced vibration is characterized by moving loads at specific frequencies and soil conditions. In fact, it is predicted that the vibration sources are involved the wheel distance, number of cars, speed of operation, drift of rails, structural born vibration, etc. In this paper the characteristics of transferring vibration induced by the high-speed train in operation is discussed. Field measurements was conducted at region from Chungnam Yungj So-jung-myan to Chungbuk Chungwon hyun-do-myun. In the near future. these data will be used as the fundamental data for establishment of the countermeasure for vibrational reduction of high speed train using the results of the field measurements and quantitative prediction of the vibration level

• Tribology and Lubricants
• /
• 제12권1호
• /
• pp.22-28
• /
• 1996

This study was undertaken to investigate the dry wear characteristics and mechanism of KP-4M steel for plastic molding against SKD 61 hardened by heat treatment. The wear test was carried out under different conditions such as sliding speed, contact pressure, sliding distance, with frictional tester of pin on disc type. The wear loss on variation of sliding speed was little in lower speed range below 0.5 m/sec and in higher speed range above 1.5 m/sec,'but wear loss was high in intermediate speed range. The critical sliding speed, which showed the maximum value of specific wear rate, became lower with increased contact pressure. Increasing the contact pressure, the critical sliding distance Lcr which the wear mechanism changes from severe wear to mild wear was increased due to the decrease of oxidation reaction velocity. Through this study we suggested a model of generation and elimination process of wear debris of KP-4M steel for plastic molding.