• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1491-1494
• /
• 2003

A specific experimental method, the Split Hopkinson Pressure Bar (SHPB) technique has been widely used to determine the dynamic material properties under the impact compressive loading conditions with strain-rate of the order of 103/s∼104/s. This type of test procedure has been used to examine the dynamic response of materials in various modes of testing. In this paper, dynamic deformation behaviors of rubber materials widely used for the isolation of vibration from varying structures under dynamic loading are determined using a Split Hopkinson Pressure Bar technique.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.820-823
• /
• 2000

The characteristics of wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of tungsten carbide in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension, the gap of deflection was decreased after thickness 60mm and discharge time of 6$\mu\textrm{s}$ due to the changing from fundamental mode to vibration mode. The deflection is the smallest at the water specific resistivity of 7.5 kΩ ㆍcm. The deflection is found to be decreased as increasing dwell time, and the result is due to the vibration of the pressure and the amount of the dielectric. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, was observed for rough wire-cutting EDM of STD-11. This phenomena is found to be decreased as the number of EDM is increased. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.537-542
• /
• 2000

Wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of STD-11 in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension. The deflection is the smallest at the speed of wire of 10.6m/min and the water specific resistivity of 5k$\Omega$.cm. The deflection is found to be decreased as increasing dwell time. But if the water pressure is high, it is found not to be changed after the vibration of 4sec. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, is observed for rough wire-cutting EDM of STD-11. This phenomena is found to be similar in spite of the change of EDM energy level. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• 지질공학
• /
• 제26권1호
• /
• pp.51-61
• /
• 2016

최근 들어 도심지 재개발과 산업단지 조성 등이 활발하게 진행되면서 깎기 비탈면의 효율적 활용과 민원방지 그리고 환경훼손을 최소화할 수 있는 공법의 필요성이 점차 커지고 있다. 판넬식 옹벽은 지보재 보강을 통해 원지반의 전단강도를 증가시키고 전면판인 프리캐스트 판넬과 지보재를 체결하여 개별적 벽체를 형성시킴으로써 수평토압에 저항하는 공법이다. 프리캐스트 판넬의 적용으로 기존 옹벽에서 발생하던 콘크리트 현장타설에 의한 공기지연과 콘크리트 품질저하 등의 문제는 다소 해결되었지만 비탈면 과다절취에 의한 사토처리 및 토취장 확보, 및 옹벽 전면 콘크리트 노출로 인한 경관성 저하문제는 여전히 미결과제로 남아있는 실정이다. 본 연구에서는 기존 판넬식옹벽의 단점을 보완하기 위하여 판넬 전면을 자연암반형으로 연출하고 수직의 원지반에도 부착이 가능하도록 공정을 개선하였으며 실내 및 현장시험을 통하여 개발된 옹벽의 현장 적용성 평가를 수행하였다. 판넬에 대한 실내시험을 수행하여 자연암반형 판넬의 자체강도 및 거동특성에 대한 검증을 수행하였으며 현장 시험시공을 통하여 수직절취 및 원지반 부착에 대한 현장 적용성을 평가하였다. 또한 시험시공 시 보강재 및 비탈면에 대한 계측 을 수행하였으며 이를 3차원 수치해석 결과와 비교·분석하였다. 실내시험 결과 사보강에 의한 판넬의 펀칭강도 증가를 확인하였으며 현장 시험시공을 통하여 원지반 부착식 옹벽의 시공성 및 현장 적용성을 확인하였다. 또한, 장기계측 및 수치해석적 검증을 통하여 원지반 부착식 옹벽 시스템이 시공중 및 장기적으로 안정성이 확보됨을 확인하였다.

• 자원리싸이클링
• /
• 제4권1호
• /
• pp.12-19
• /
• 1995

화강암 석재가공 공장의 절단 및 연마공정시 발생하는 슬러지를 재활용하기 위해 광물학적 조사 및 화학분석을 실시하였으며, 철분 및 불순물등의 제거 실험을 위한 습식 하드로싸이클론 및 고구배자력선별 실험을 실시하였다. $SiO_2$와 $Al_2O_3$의 함량은 각각 70.9%, 13.6%이었으며, 요업 및 사업원료로 사용하는데 있어서 백색도를 저하시키는 불순물인 $Fe_2O_3$함량은 2.52%로 비교적 많았으며, $TiO_2$함량은 0.29%이였다. 하이드로싸이클론 실험결과 슬러지의 양은 100~150g/l, Underflow Nozzle의 크기는 2.0~2.5mm, 압력은 1.2~1.6kg/$\textrm{cm}^3$의 조건에서 $-37{\mu}\textrm{m}$ 입도 85%를 얻을 수 있었다. 고구배자력실험결과 10,000가우스에서 $Fe_2O_3$는 0.65%, $TiO_2$는 0.07%인 비자착산물을 얻을 수 있었으며, 분산제로 Sodium tripolyphosphate를 사용한 결과 탈철에 효과적이였다. 슬러지 산물의 물리적인 특성은 백색도 68.5%, 수축율 13.4%, 비표면적 $3.0812m^2/g$로 나타났다.

• 한국안전학회지
• /
• 제15권3호
• /
• pp.66-70
• /
• 2000

In order to cope with environmental problems caused by harmful gases emitted from various industrial sources, a new technology which employs discharge plasma formed in ordinary atmospheric pressure has been intensively investigated in many industrialized nations. Although a plenty of useful outcomes and suggestions have been made public by scientists in this field, few commercial products which effectively decompose pollutant gases have appeared as yet. This is partly because that the energy efficiency of a most effective plasma reactor has not reached a satisfactory level in comparison with those of devices using conventional technologies. In an attempt to solve the problem mentioned above, we noticed to combine heterogeneous electrical discharges. This concepts is based on that each plasma reactor has its specific spatial region in which chemical reaction are active and by electrically affected with another reactor of different type, the activated region would increase - which may lead to cutting down the energy consumption. To prove this concept experimentally, two different discharge equipments, a plane ceramic-based surface discharge electrode and a corona electrode with tungsten needle may, are selected and combined to fabricate a hybrid plasma reactor. The results are summarized as follows; (1) Ozone concentration generated in the plasma region drastically increases when the positive corona discharge is added to the surface discharge. The rate of increase of ozone depends on the frequency of the surface discharge. The negative corona, however, does not contribute to the improvement of the ozone generation. (2) NO(nitrogen monoxide) decomposition rate also improves by simultaneously applying the surface and the positive corona discharges. The effect of the corona superposition is more evident when the level of the surface discharge is moderate. (3) By adjusting the corona level, the net energy efficiency during NO decomposition improves in comparison with the simple surface discharge reactor.