• Journal of the Korean Society of Food Culture
• /
• v.20 no.4
• /
• pp.426-432
• /
• 2005

To develop a low-temperature and long-term fermented Baechu kimchi, kimchi was prepared according to a recipe of specific ratio with major and minor ingredients and adjusted its final salinity to 3.7%. Baechu kimchi fermented at $15{\pm}1^{\circ}C$ 24 hours and transferred them into in a refrigerator only for kimchi, and then continued to ferment at $-1{\pm}1^{\circ}C$ for 30 weeks to make a low-temperature and long-term fermented kimchi. The initial cutting force of 8.45kgf dropped gradually and reached to 5.19kgf after 30 weeks of fermentation. In compression force the gumminess, hardness and chewiness of Baechu kimchi showed a great decrease during the fermentation, but the springiness and adhesiveness increased in slight. Correlation coefficient between the chewiness and gumminess was the highest(r=0.879). In spite of sensory evaluation scores of the appearance and texture were the highest on 0 day of fermentation, the saltiness was evaluated the worst to eat. Scores for sourness and carbonated flavor were the best during 18 to 22 weeks of fermentation, and overall acceptability was the best after 14 weeks of fermentation. Very high correlation coefficients were revealed between the sourness and carbonated flavor(r=0.813) and between the sourness and off-flavor(r=0.805). According to these results we concluded that the best low-temperature and long-term fermented Baechu kimchi prepared with 3.7% salinity and fermented at $15{\pm}1^{\circ}C$ for 24 hours and then transferred into a kimchi refrigerator at $-1{\pm}1^{\circ}C$, and completed the fermentation for 18 weeks.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.72-79
• /
• 1997

A study is a experiment which is figure out to optimum discharge cutting condition of the surface roughness, electronic discharging speed and electrode wear ration with Ton , Toff and V(voltage) as an input condition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• Korean Journal of Food Science and Technology
• /
• v.43 no.5
• /
• pp.583-587
• /
• 2011

This study evaluated the quality characteristics of yukwa pellets and yukwa bases on the ratio of soju addition (0, 25, 50, 75, and 100% v/v). Yukwa base with 50% ratio of soju addition displayed the highest diameter, volume and specific volume. The yukwa base with 75% ratio of soju addition displayed the longest in length. The weight of yukwa base increased as the ratio of soju increased. Lightness increased in yukwa pellet and yukwa base as the ratio of soju increased. Lightness of yukwa base was higher than yukwa pellet, but yellowness and redness of yukwa base were lower than yukwa pellet. Air cell size of yukwa base decreased as the ratio of soju increased. The compression and cutting force of yukwa base with 50% ratio of soju addition were lowest, while yukwa base with 0% soju was highest. In the sensory evaluation, preference of color increased as the ratio of soju addition increased. Yukwa base with 50% ratio of soju addition was the highest in internal compactness, mouth-feel, and overall preference. The results show that a soju ratio of 50-75% addition for total liquid is useful in the production of high quality yukwa base.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.459-469
• /
• 2016

The goal of this study was to examine property changes induced by the choice of filler used with an epoxy resin that was developed in 2014 to restore cultural assets and consider the applicability of the resin as a restorative agent. The properties of putty mixed with 9 types of fillers and as-developed resins were compared with those of existing materials with regard to stability, superiority and applicability. The potential of the putty as an alternative material was also examined. The materials produced the best adhesiveness, color change and hardness results when mixed with lime. Micro balloon produced the best wear rates and hardening times, while diatomite produced the best tensile and compressive strengths. A plaster and white mineral pigment mixture produced the best specific gravity. Every material except for lime exhibited about 2.5-20 times higher wear rates than the existing material, which is thought to exhibit an excellent cutting force. The hardening time was enhanced by about 0.5-9 times to improve convenience. The stability of the relic was also ensured by improving hand staining without any shrinkage or deformation. The material exhibited about 0.5-27 times less yellowing. Thus, it is thought to be a material that can reduce property changes and reduce the degree of relic fatigue which occurs during reprocessing and sense of difference from relic.