• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.555-555
• /
• 2009

A web GIS based database system of thermophysical property of rocks in Korea is under construction. Rock samples were randomly collected over the whole country and sample spacings were generally 1 to 10 km. Thermal diffusivity, spedific heat, thermal conductivity, specific heat, density and porosity were measured on a collection of 1,560 rock samples in the laboratory. The sampled rocks were classified into igneous, metamorphic and sedimentary rock types and the variables were statistically studied. The thermal conductivity were compared with thermal diffusivity, porosity and dry density to define any correlations and the distribution of thermal conductivity is characterized by the geostatistical analysis. The optimal mapping of thermal conductivity is very useful as a practical design component for any geothermal systems.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2001년도 Proceedings of the 3rd Annual Meeting of Yellow Sea Environment
• /
• pp.11-16
• /
• 2001

If microorganisms are injected into porous medium such as soils along with appropriate substrate and nutrients, soil pore size and shape are changed from the initial condition as a result of biofilm formation, which make hydraulic conductivity reduced. In this research, hydraulic conductivity reduction was measured after specific bacterium or fungus was inoculated into soil pore. Hydraulic conductivity was decreased to 10 % ∼ 1 % and maintained constant while substrate was provided. Under the adverse conditions such as no substrate, chemical solution permeation, and freeze-thaw cycles, hydraulic conductivity was increased 30∼50%. Hydraulic conductivity decrease of fungus-soil mixture was faster than that of bacterium-soil mixture. Fungus-soil mixture, however, was more sensitive to the adverse conditions.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.33-38
• /
• 2008

A ground-loop heat exchanger in a ground source heat pump system is an important unit that determines the thermal performance of a system and its initial cost. The Size and performance of this heat exchanger is highly dependent on ground thermal properties. A proper design requires certain site-specific parameters, most importantly the ground effective thermal conductivity, the borehole thermal resistance and the undisturbed ground temperature. This study was performed to investigate the effect of some parameters such as borehole lengths, various grouting materials and U-tube configurations on ground effective thermal conductivity. In this study, thermal response tests were conducted using a testing device with 9-different ground-loop heat exchangers. From the experimental results, the length of ground-loop heat exchanger affects to the effective thermal conductivity. Among the various grouting materials, the bentonite-based grout with silica sand shows the largest thermal conductivity value.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.257-260
• /
• 2005

Graphite reinforced conductive polymer composites were fabricated by the compression molding technique. Graphite powder was mixed with an phenol resin to impart electrical property in composites. The ratio and particle size of graphite powder were varied to investigate electrical conductivity of cured composites. In this study, graphite reinforced conductive polymer composites with high filler loadings(>66wt.%) were manufactured to accomplish high electrical conductivity. With increasing the loading ratio of graphite powder, the electrical conductivity and flexural strength increased. However. above 80wt.% filler loadings, flexural strength decreased due to lack of resin. Regardless of graphite particle size, electrical conductivity wasn’t varied. On the other hand, with decreasing particle size, flexural strength increased due to high specific surface area.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.183-184
• /
• 2023

The purpose of this study is to compare and analyze the effect of type and volume fraction of fiber on the electrical conductivity and shielding effectiveness of cementitious composites. The large specific surface area of amorphous metallic fiber, as well as the high number of fibers per unit weight, provided an advantage in the formation of conductive path. As the result, the electrical conductivity of amorphous metallic fiber was evaluated to be higher, and the shielding effectiveness was also higher. However, the shielding effectiveness according to electrical conductivity was confirmed to have a threshold point, and further research is needed to improve it.

• 한국산림과학회지
• /
• 제88권1호
• /
• pp.18-30
• /
• 1999

이 연구는 우리 나라 주요(主要) 낙엽(落葉) 활엽수(闊葉樹) 21종(種)에 대하여 줄기, 가지, 분지부(分技部)와 정단부(頂端部) 1년생 주간(主幹)과 측지(側枝) 등의 leaf specific conductivity(LSC)를 측정하여 수분통도성(水分通導性)의 배치구조(hydraulic architecture)를 수종별로 비교하였다. 고로쇠나무, 복자기, 박달나무, 물푸레나무와 느티나무를 제외한 활엽수종의 LSC 값은 줄기가 가지보다 컸으며, 분지부(分技部)는 가장 작은 값을 나타냈다. 특히 분지부(分技部)에 있어서 LSC값의 급격한 감소는 모든 수종에서 나타난 공통적인 특징이다. 산공재 수종에서는 자작나무, 피나무, 층층나무, 박달나무가 다른 수종에 비하여 높은 LSC를 나타냈으며, 복자기는 가장 낮은 LSC를 나타내는 수종이었다. 환공재 수종에서는 다릅나무, 참오동나무, 갈참나무, 졸참나무의 LSC가 높았으며, 느릅나무가 가장 낮은 LSC를 나타냈다. 복자기, 층층나무, 들메나무, 신갈나무와 느티나무에 있어서 정단부(頂端部) 1년생 주간(主幹) 및 측지(側枝)의 LSC값은 주간이 최소 $22{\mu}{\ell}/g$, 최대 $139{\mu}{\ell}/g$ 이고, 측지가 최소 $11{\mu}{\ell}/g$, 최대 $73{\mu}{\ell}/g$의 범위를 보였으며, 정단주간(頂端主幹)(leaders)이 정단측지(頂端側技)(adjacent laterals)보다 평균 2배 이상, 최대 5배 정도로 크게 나타나, 정단주간은 정단측지보다 수력적(水力的) 우세(優勢)(hydraulic dominance)를 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.962-971
• /
• 2004

This paper has dealt with thermo-physical properties of microencapsulated phase change material slurry as a latent heat storage material having a low melting point. The measured results of the thermo-physical properties of the test microencapsulated phase change material slurry, those are, density, specific heat, thermal conductivity and viscosity, were discussed for the temperature region of solid and liquid phases of the dispersion material (paraffin). The measurements of these properties of microencapsulated phase change material slurry have been carried out by using a specific-gravity meter, a water calorimeter, a differential scanning calorimeter(DSC), a transient hot wire method and rotating type viscometer, respectively. It was clarified that the additional properties law could be applied to the estimation of the density and specific heat of microencapsulated phase change material slurry and also the Euckens equation could be applied to the estimation of the thermal conductivity of this slurry.

• Journal of the Korean Wood Science and Technology
• /
• 제30권4호
• /
• pp.41-50
• /
• 2002

국산재의 합리적이고 효율적인 사용을 위하여 상수리나무와 일본잎갈나무의 소형 무결점 시편에 대한 열전도율과 수축율 실험을 실시하였다. 모든 시편은 상대습도 86, 66, 20% 및 온도 23℃인 항온항습기에서 함수율 18, 12, 5%순으로 3회 반복·조습처리하였다. 상수리나무와 일본잎갈나무의 방사방향 및 접선방향의 수축율은 모든 함수율에서 주기(cycle)의 증가에 따라 감소하였다. 또한 전건비중이 증가할수록 방사방향 및 접선방향 수축율은 증가하였다. 열전도율은 주기가 증가하면 모든 함수율에서 증가하는 경향을 나타냈다. 그리고 열전도율과 수축율은 전건비중 및 함수율과 매우 높은 상관계수를 나타냈다.

• 설비공학논문집
• /
• 제23권2호
• /
• pp.95-102
• /
• 2011

A ground loop heat exchanger in a ground source heat pump system is an important unit that determines the thermal performance of a system and its initial cost. A proper design requires certain site specific parameters, most importantly the ground effective thermal conductivity, the borehole thermal resistance and the undisturbed ground temperature. This study was performed to investigate the effect of some parameters such as borehole lengths, various grouting materials and U tube configurations on ground effective thermal conductivity and borehole thermal resistance. In this study, thermal response tests were conducted using a testing device to 9 different ground loop heat exchangers. From the experimental results, the length of ground loop heat exchanger affects to the effective thermal conductivity. The results of this experiment shows that higher thermal conductivity of grouting materials leads to the increase effective thermal conductivity from 22 to 32%. Also, mounting spacers have increased by 14%.

• 자원환경지질
• /
• 제47권4호
• /
• pp.441-453
• /
• 2014

대륙지각의 대표적인 암석이며 우리나라의 약 25%를 차지하는 쥬라기 화강암을 대상으로 상부지각의 열적 현상을 이해하는데 중요한 정보인 물성과 열물성을 측정하였다. 충남 연기군(2개 시추공, 149개)과 대전시 유성구(1개 시추공, 59개)의 총 3개 시추공으로부터 회수한 206개 화강암의 건조 상태의 열전도도 평균은 2.813 W/mK이고, 공극 보정을 한 평균 열전도도는 2.900 W/mK이다. 공극 내 물의 효과로 인해 공극 보정을 한 열전도도가 높게 나타난다. 건조 상태의 평균 열확산율은 $1.296{\times}10^{-6}m^2/sec$이며, 온도변화에 따른 열확산율 변화는 온도가 증가할수록 열확산율이 낮아지는 경향을 보인다. $200^{\circ}C$에서의 열확산율은 상온 $25^{\circ}C$에서 보다 30% 정도 더 낮게 나타나는 것을 확인하였다. 206개 화강암의 평균 공극은 0.010이며, 건조밀도와 포화밀도는 각각 $2.662g/cm^3$와 $2.673g/cm^3$이다. 열전도도와 공극의 상관관계로부터 화강암의 열전도도는 공극보다 구성광물에 의한 영향이 더 큰 것을 확인하였다. 열전도도와 열확산율의 상관관계에서는 결정계수가 0.898로 선형관계가 잘 나타나고, 공극과 밀도의 상관관계에서는 ${\rho}=-2.393{\times}{\phi}+2.705$라는 상관식을 산출하였다. XRD 분석과 XRF 분석 결과로부터 석영과 $SiO_2$ 함량이 증가하면 열전도도가 높아지고 조장석과 $Al_2O_3$가 증가하면 열전도도가 낮아지는 경향을 확인하였다. 또한 부피 함량비가 많은 광물과 화학성분을 이용해 회귀 분석을 수행하였다. 석영을 이용한 선형식은 $K=0.0294V_{Quartz}+1.93$으로 산출 되었다. 또한, $SiO_2$를 이용한 선형식은 $K=0.237W_{SiO_2}-14.09$로 산출 되었고, $SiO_2$와 $Al_2O_3$를 이용한 회귀식은 $K=0.053W_{SiO_2}-0.476W_{Al_2O_3}+6.52$로 산출 되었다. Felsic-marfic index를 이용하여 산출한 비중과 측정된 비중의 평균은 각각 2.645와 2.650이며, 평균 상대오차는 0.667%로 나타났다.